From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id MAA36638 for ; Mon, 23 Nov 1998 12:39:50 -0800 (PST) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id MAA52835 for linux-list; Mon, 23 Nov 1998 12:38:43 -0800 (PST) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgidal.dallas.sgi.com (sgidal.dallas.sgi.com [169.238.80.130]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via SMTP id MAA61461 for ; Mon, 23 Nov 1998 12:38:40 -0800 (PST) mail_from (chad@roctane.dallas.sgi.com) Received: from roctane.dallas.sgi.com by sgidal.dallas.sgi.com via ESMTP (950413.SGI.8.6.12/911001.SGI) for <@sgidal.dallas.sgi.com:linux@cthulhu.engr.sgi.com> id OAA11960; Mon, 23 Nov 1998 14:38:39 -0600 Received: from roctane.dallas.sgi.com (localhost [127.0.0.1]) by roctane.dallas.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id MAA02217 for ; Mon, 23 Nov 1998 12:38:38 -0800 (PST) Message-ID: <3659C7CD.1B134991@roctane.dallas.sgi.com> Date: Mon, 23 Nov 1998 14:38:37 -0600 From: Chad Carlin Reply-To: chad@sgi.com Organization: Silicon Graphics Inc. X-Mailer: Mozilla 4.5C-SGI [en] (X11; I; IRIX64 6.5 IP30) X-Accept-Language: en MIME-Version: 1.0 To: linux@cthulhu.engr.sgi.com Subject: New to Linux References: <199810310228.SAA34114@oz.engr.sgi.com> <19981105031325.P359@uni-koblenz.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk Help. Here is what I have: Indy: R4k indy w/ a 1GB and a 500MB disk. I have an external 9GB from my other system that I am temorarily (I hope) using to boot IRIX on my Linux Indy. Software: Linux-installer-0.2.tar root-be-0.04.cpio SRPMS vmlinux-indy-2.1.99.tar.gz instructions I read the instructions. The one with all of the tftp and nfs setup. Is this for after I boot Linux, so I can install the rest of the software? BTW I tested this by booting miniroot from my other Indy. I also read the INSTALL instructions. I was able to successfully: ./mke2fs drive, ./installer drive, cjwsh> MAKEDEV, cpio root-be-0.04.cpio, and ./e2fsck -fy drive. Finally I did the, gzip -dc vmlinux.gz > /vmlinux. All of this went OK. It's the "boot vmlinux root=/dev/sda0" that makes the indy panic! Do I do this from PROM or sash? I don't think that I can read the efs filesystem without sash. Is there a better way to determine what device my e2fs root filesystem is at? Tell me if I'm getting this proceedure right. 1)Boot vmlinux kernel and mount e2fs filesystem as /. 2)Use tftp to install the stuff that I downloaded in the SRPMS directory. 3)Somehow I will end up with a system that can boot without having IRIX on a local disk. BTW is there anyway to mount this e2fs filesystem from with IRIX? Thanks for any and all input. Flame me if you must. Chad