From mboxrd@z Thu Jan 1 00:00:00 1970 Received: (from majordomo@localhost) by oss.sgi.com (8.11.2/8.11.3) id g25Ep4t27148 for linux-mips-outgoing; Tue, 5 Mar 2002 06:51:04 -0800 Received: from arianna.cineca.it (dns.cineca.it [130.186.1.53]) by oss.sgi.com (8.11.2/8.11.3) with SMTP id g25Eot927145 for ; Tue, 5 Mar 2002 06:50:55 -0800 Received: from cineca.it (andrea@nb-venturi.cineca.it [193.204.122.87]) by arianna.cineca.it (8.12.1/8.12.1/CINECA 5.0-MILTER) with ESMTP id g25DoStv008622; Tue, 5 Mar 2002 14:50:28 +0100 (MET) Message-ID: <3C84CD2A.6070901@cineca.it> Date: Tue, 05 Mar 2002 14:50:34 +0100 From: Andrea Venturi User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.8) Gecko/20020204 X-Accept-Language: en-us MIME-Version: 1.0 To: Ladislav Michl CC: Andrea Venturi , linux-mips@oss.sgi.com Subject: Re: device support on indy WS !? References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Ladislav Michl wrote: > On Tue, 5 Mar 2002, Andrea Venturi wrote: > > [snip] > >>1. audio hal2: i saw in the cvs.sgi.com kernel the OSS hal2.* files; >>what about the guenther alsa0.9 port? is it finished? what about iec958 >>spdif support? >> > > I can't say anything about ALSA 0.9 port. I decided for OSS driver, > because I wanded to listen music and there was no driver. OSS is much > better documented interface than ALSA. .................. > > recording doesn't work and will not work until someone provide better > documentation. > > btw, what is iec958 spdig? > it's a digital audio interface, for some info, see here: http://www.epanorama.net/documents/audio/spdif.html in the indy there is a consumer mini-jack connector; you should be able to link a dolby surround digital amplifier or a dat or similar digital audio device.. see here: http://www.futuretech.vuurwerk.nl/i2sec3.html BTW, on the mainboard, i can see the cs-8411, and there is the 8411.pdf inside the audio.zip doc package > >>2. isdn: there is a siemens isac-s chip (BTW i didn't see the hscx >>twin): is it supported now? it should be not to difficult to leverage >>the ia32-isdn hisax (passive) isac driver _if_ the hpc3 delivers the >>irq? what do you think about it? >> > > there is currenty no support. any documentation available? > apart from the hpc3.ps on: ftp://oss.sgi.com/pub/linux/mips/doc/indy/ you should find the isac-s (peb2086) specs here: http://www.infineon.com/cgi/ecrm.dll/ecrm/scripts/prod_ov.jsp?oid=13633&cat_oid=-9183 but i don't know if it's enough.. i mean, if we should know something more on the way the isac-s chip is linked thru the pbus to the hpc3 chip. bye andrea venturi