From: Ryan Martindale <ryan@qsicorp.com>
To: "Kevin D. Kissell" <kevink@mips.com>
Cc: linux-mips@oss.sgi.com
Subject: Re: fpu woes (TX3912)
Date: Mon, 15 Jul 2002 10:48:52 -0700 [thread overview]
Message-ID: <3D330B04.CDE3E332@qsicorp.com> (raw)
In-Reply-To: 01c401c22c1c$1973a170$10eca8c0@grendel
"Kevin D. Kissell" wrote:
>
> > I'm using the tx3912 processor for an embedded device and since it
> > doesn't have an fpu, I don't have coprocessor #1. Recently, I remember
> > seeing a fix in process.c for exit_thread and flush_thread, and did
> > apply it - but there still is a problem (at least for me). In traps.c,
> > the save_fp_context and restore_fp_context are set to _save_fp_context
> > (in r2300_fpu.S) which don't check to see if I have a coprocessor
> > available. As I am rather new to the linux/linux-mips development world,
> > I thought I'd give a heads up (it is causing my embedded system to
> > crash). Any direction on fixing it would be welcome, but I'm not sure
> > I'll get to the point where I will submit any patches any time soon.
>
> People break things from time to time, but at least at one point
> in history, R3xxx platforms were correctly supported by the
> FPU emulator code. Looking at the source code on my
> system, it looks like traps.c has been "cleaned up" in a
> somewhat wierd manner, such that the test for whether
> there is an FPU happens redundantly, once in the specific
> case of a 4K family CPU (which you would not hit on your
> TX39), and again just after the switch on the CPU type.
> Did someone screw up the setting of mips_cpu.options
> for a TX39xx or something? Is that code missing from
> the sources that you're using? Are you sure that it isn't
> something else blowing up on you? There have been
> mods made locally here and there that might have
> broken the FPU emulator for R3xxx platforms, but
> I didn't think that any of them were up on OSS.sgi.com
> or kernel.org.
>
> Regards,
>
> Kevin K.
I am actually using the 2.4.18 stable kernel source, although I did
check the 2.5.14 source tree I have to see if any modifications had
taken place. My problem is the in signal.c function setup_sigcontext
has:
if (current->used_math) { /* fp is active. */
set_cp0_status(ST0_CU1);
err |= save_fp_context(sc);
last_task_used_math = NULL;
regs->cp0_status &= ~ST0_CU1;
current->used_math = 0;
}
There is no check to see if I have an FPU. I modified it to:
if (current->used_math) { /* fp is active. */
if (mips_cpu.options & MIPS_CPU_FPU) {
set_cp0_status(ST0_CU1);
err |= save_fp_context(sc);
regs->cp0_status &= ~ST0_CU1;
}
last_task_used_math = NULL;
current->used_math = 0;
}
And now I am not crashing. As far as how it is supposed to be setup, I
don't really know - like I said, I'm pretty new at this. I don't see any
ifdefs/checks around the code in traps.c
case CPU_R2000:
case CPU_R3000:
case CPU_R3000A:
case CPU_R3041:
case CPU_R3051:
case CPU_R3052:
case CPU_R3081:
case CPU_R3081E:
case CPU_TX3912:
case CPU_TX3922:
case CPU_TX3927:
save_fp_context = _save_fp_context;
restore_fp_context = _restore_fp_context;
I would think that traps.c would be were you would set up to handle
emulation (indeed it appears that there is an emulator option set up for
the processors with MIPS_CPU_4KEX && MIPS_CPU_4KTLB options set, but no
other locations seem to be concerned about this. Is this where floating
point should be dealt with?
Ryan
next prev parent reply other threads:[~2002-07-15 16:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-15 17:04 fpu woes (TX3912) Ryan Martindale
2002-07-15 16:24 ` Kevin D. Kissell
2002-07-15 16:24 ` Kevin D. Kissell
2002-07-15 17:48 ` Ryan Martindale [this message]
2002-07-15 18:04 ` Kevin D. Kissell
2002-07-15 18:04 ` Kevin D. Kissell
2002-07-16 14:03 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D330B04.CDE3E332@qsicorp.com \
--to=ryan@qsicorp.com \
--cc=kevink@mips.com \
--cc=linux-mips@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox