From: Carsten Langgaard <carstenl@mips.com>
To: Ralf Baechle <ralf@linux-mips.org>, linux-mips@linux-mips.org
Subject: Malta board patch
Date: Wed, 11 Dec 2002 09:20:28 +0100 [thread overview]
Message-ID: <3DF6F54C.64858797@mips.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 392 bytes --]
I have attached a patch, with some minor changes for the Malta board.
/Carsten
--
_ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com
|\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527
| \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555
TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556
Denmark http://www.mips.com
[-- Attachment #2: malta.patch --]
[-- Type: text/plain, Size: 4924 bytes --]
Index: arch/mips/mips-boards/generic/memory.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mips-boards/generic/memory.c,v
retrieving revision 1.6.2.1
diff -u -r1.6.2.1 memory.c
--- arch/mips/mips-boards/generic/memory.c 5 Aug 2002 23:53:34 -0000 1.6.2.1
+++ arch/mips/mips-boards/generic/memory.c 11 Dec 2002 08:11:56 -0000
@@ -168,7 +168,7 @@
+ boot_mem_map.map[i].size) {
ClearPageReserved(virt_to_page(__va(addr)));
set_page_count(virt_to_page(__va(addr)), 1);
- free_page(__va(addr));
+ free_page((unsigned long)__va(addr));
addr += PAGE_SIZE;
freed += PAGE_SIZE;
}
Index: arch/mips/mips-boards/generic/pci.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mips-boards/generic/pci.c,v
retrieving revision 1.5.2.4
diff -u -r1.5.2.4 pci.c
--- arch/mips/mips-boards/generic/pci.c 28 Sep 2002 18:28:44 -0000 1.5.2.4
+++ arch/mips/mips-boards/generic/pci.c 11 Dec 2002 08:11:56 -0000
@@ -405,6 +405,12 @@
".set\treorder");
irq = *(volatile u32 *)(KSEG1ADDR(BONITO_PCICFG_BASE));
+ __asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ ".set\tnoat\n\t"
+ "sync\n\t"
+ ".set\tat\n\t"
+ ".set\treorder");
irq &= 0xff;
BONITO_PCIMAP_CFG = 0;
break;
Index: arch/mips/mips-boards/malta/malta_int.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mips-boards/malta/malta_int.c,v
retrieving revision 1.8.2.6
diff -u -r1.8.2.6 malta_int.c
--- arch/mips/mips-boards/malta/malta_int.c 5 Aug 2002 23:53:34 -0000 1.8.2.6
+++ arch/mips/mips-boards/malta/malta_int.c 11 Dec 2002 08:11:57 -0000
@@ -91,6 +91,9 @@
{
unsigned int data,datahi;
+ /* Mask out corehi interrupt. */
+ clear_c0_status(IE_IRQ3);
+
printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n");
printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n"
, regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr);
@@ -125,7 +128,6 @@
/* We die here*/
die("CoreHi interrupt", regs);
- while (1) ;
}
void __init init_IRQ(void)
Index: include/asm-mips/mips-boards/malta.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/mips-boards/malta.h,v
retrieving revision 1.1.4.2
diff -u -r1.1.4.2 malta.h
--- include/asm-mips/mips-boards/malta.h 5 Aug 2002 23:53:38 -0000 1.1.4.2
+++ include/asm-mips/mips-boards/malta.h 11 Dec 2002 08:12:17 -0000
@@ -32,9 +32,23 @@
* Malta I/O ports base address for the Galileo GT64120 and Algorithmics
* Bonito system controllers.
*/
-#define MALTA_GT_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS)
#define MALTA_BONITO_PORT_BASE (KSEG1ADDR(0x1fd00000))
-#define MALTA_MSC_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ GT_READ(reg, addr);
+ return KSEG1ADDR((addr & 0xffff) << 21);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ MSC_READ(reg, addr);
+ return KSEG1ADDR(addr);
+}
/*
* Malta RTC-device indirect register access.
@@ -58,5 +72,7 @@
#define SMSC_CONFIG_ACTIVATE_ENABLE 1
#define SMSC_WRITE(x,a) outb(x,a)
+
+#define MALTA_JMPRS_REG (KSEG1ADDR(0x1f000210))
#endif /* !(_MIPS_MALTA_H) */
Index: include/asm-mips64/mips-boards/malta.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips64/mips-boards/malta.h,v
retrieving revision 1.1.2.2
diff -u -r1.1.2.2 malta.h
--- include/asm-mips64/mips-boards/malta.h 5 Aug 2002 23:53:39 -0000 1.1.2.2
+++ include/asm-mips64/mips-boards/malta.h 11 Dec 2002 08:12:18 -0000
@@ -32,9 +32,23 @@
* Malta I/O ports base address for the Galileo GT64120 and Algorithmics
* Bonito system controllers.
*/
-#define MALTA_GT_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS)
#define MALTA_BONITO_PORT_BASE (KSEG1ADDR(0x1fd00000))
-#define MALTA_MSC_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ GT_READ(reg, addr);
+ return KSEG1ADDR((addr & 0xffff) << 21);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ MSC_READ(reg, addr);
+ return KSEG1ADDR(addr);
+}
/*
* Malta RTC-device indirect register access.
@@ -58,5 +72,7 @@
#define SMSC_CONFIG_ACTIVATE_ENABLE 1
#define SMSC_WRITE(x,a) outb(x,a)
+
+#define MALTA_JMPRS_REG (KSEG1ADDR(0x1f000210))
#endif /* !(_MIPS_MALTA_H) */
next reply other threads:[~2002-12-11 8:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-11 8:20 Carsten Langgaard [this message]
2002-12-11 17:04 ` Malta board patch Jun Sun
2002-12-11 17:27 ` Maciej W. Rozycki
2002-12-12 7:46 ` Carsten Langgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DF6F54C.64858797@mips.com \
--to=carstenl@mips.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox