Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: "Kip Walker" <kwalker@broadcom.com>
To: linux-mips@linux-mips.org
Cc: "Ralf Baechle" <ralf@linux-mips.org>
Subject: [PATCH] add CONFIG_DEBUG_INFO
Date: Mon, 03 Mar 2003 11:43:03 -0800	[thread overview]
Message-ID: <3E63B047.D3BA2A2C@broadcom.com> (raw)
In-Reply-To: 20030220113404.E7466@mvista.com

[-- Attachment #1: Type: text/plain, Size: 973 bytes --]

Jun Sun wrote:
> 
> This patch make the following changes
> 
>         1) CONFIG_REMOTE_DEBUG -> CONFIG_KGDB
>         2) CONFIG_DEBUG -> CONFIG_RUNTIME_DEBUG
> 
> MIPS is pretty much the only one (other than the pitiful s390 :0)
> using REMOTE_DEBUG instead of KGDB.  So it is a good thing to change
> it.
> 
> As Keith pointed out, CONFIG_DEBUG is too general (which has
> already caused confusion, BTW).  RUNTIME_DEBUG is more appropriate.

I'd like to propose a further change here, which is to decouple the
inclusion of debugging symbols from building with KGDB support.  I use a
JTAG debugger all the time, and don't need/want KGDB built in (by
default it forces the remote GDB to attach and continue, and it steals
one of the serial ports on my platform).

How about adding "CONFIG_DEBUG_INFO" which simply adds '-g' to the
CFLAGS?  REMOTE_KGDB can be left independent of this option by allowing
either option to enable '-g'.  Patch for 2.4 attached.

Comments?

Kip

[-- Attachment #2: debug.diff --]
[-- Type: text/plain, Size: 1834 bytes --]

Index: arch/mips/config-shared.in
===================================================================
RCS file: /home/cvs/linux/arch/mips/Attic/config-shared.in,v
retrieving revision 1.1.2.48
diff -u -r1.1.2.48 config-shared.in
--- arch/mips/config-shared.in	26 Feb 2003 21:14:23 -0000	1.1.2.48
+++ arch/mips/config-shared.in	3 Mar 2003 19:41:11 -0000
@@ -976,6 +976,7 @@
 
 bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
 bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG
+bool 'Debugging symbols' CONFIG_DEBUG_INFO
 bool 'Remote GDB kernel debugging' CONFIG_KGDB
 dep_bool '  Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB
 if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
Index: arch/mips/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips/Makefile,v
retrieving revision 1.78.2.23
diff -u -r1.78.2.23 Makefile
--- arch/mips/Makefile	26 Feb 2003 21:14:23 -0000	1.78.2.23
+++ arch/mips/Makefile	3 Mar 2003 19:41:11 -0000
@@ -41,8 +41,8 @@
 LINKFLAGS	+= -G 0 -static # -N
 MODFLAGS	+= -mlong-calls
 
-ifdef CONFIG_KGDB
-GCCFLAGS	+= -g
+ifneq ($(CONFIG_DEBUG_INFO)$(CONFIG_KGDB),)
+GCCFLAGS	+= -gstabs+
 ifdef CONFIG_SB1XXX_CORELIS
 GCCFLAGS	+= -mno-sched-prolog -fno-omit-frame-pointer
 endif
Index: arch/mips64/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips64/Makefile,v
retrieving revision 1.22.2.27
diff -u -r1.22.2.27 Makefile
--- arch/mips64/Makefile	26 Feb 2003 21:14:24 -0000	1.22.2.27
+++ arch/mips64/Makefile	3 Mar 2003 19:41:11 -0000
@@ -39,7 +39,7 @@
 LINKFLAGS	+= -G 0 -static # -N
 MODFLAGS	+= -mlong-calls
 
-ifdef CONFIG_KGDB
+ifneq ($(CONFIG_DEBUG_INFO)$(CONFIG_KGDB),)
 GCCFLAGS	+= -g
 ifdef CONFIG_SB1XXX_CORELIS
 GCCFLAGS	+= -mno-sched-prolog -fno-omit-frame-pointer

  reply	other threads:[~2003-03-03 19:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-02-20 19:34 [PATCH] rename CONFIG_REMOTE_DEBUG and CONFIG_DEBUG Jun Sun
2003-03-03 19:43 ` Kip Walker [this message]
2003-03-03 19:45   ` [PATCH] add CONFIG_DEBUG_INFO Kip Walker
2003-03-03 19:50   ` Juan Quintela
2003-03-06 16:47     ` Kip Walker
2003-03-07 13:48       ` Juan Quintela
2003-03-07 15:21         ` Ralf Baechle
2003-03-07 15:27         ` Kip Walker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3E63B047.D3BA2A2C@broadcom.com \
    --to=kwalker@broadcom.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox