From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Thu, 18 Dec 2003 16:51:18 +0000 (GMT) Received: from gateway-1237.mvista.com ([IPv6:::ffff:12.44.186.158]:58609 "EHLO av.mvista.com") by linux-mips.org with ESMTP id ; Thu, 18 Dec 2003 16:51:17 +0000 Received: from mvista.com (av [127.0.0.1]) by av.mvista.com (8.9.3/8.9.3) with ESMTP id IAA26650; Thu, 18 Dec 2003 08:51:12 -0800 Message-ID: <3FE1DB05.1020702@mvista.com> Date: Thu, 18 Dec 2003 08:51:17 -0800 From: Pete Popov User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax) X-Accept-Language: en-us, en MIME-Version: 1.0 To: samavarthy c CC: linux-mips@linux-mips.org Subject: Re: USB on MIPS References: In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 3793 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: ppopov@mvista.com Precedence: bulk X-list: linux-mips I haven't worked with that board, but on the AMD/Alchemy boards, the same errors have typically been associated with improper setup of the usb controller -- usually the clock that is routed internally to the controller. Pete samavarthy c wrote: > Hi, > > I am working on a PDA based board which has a NEC MIPS VR4131 > processor. > The board has a companion chip MediaQ 1132 which has OHCI support > builtin. > The kernel used is MontaVista HardHat 2.4.18. I am trying to configure > MQ1132 for USB Host support. It looks like the Host controller > (MQ1132) is initialized properly but not sure. When I plug in a USB > stick on to the USB port, I get the following messages. > ----------------------------------------------------------------- > hub.c: USB new device connect on bus1/1, assigned device number 2 > usb-ohci.c: unlink URB timeout > usb.c: USB device not accepting new address=2 (error=-145) > > hub.c: USB new device connect on bus1/1, assigned device number 3 > usb_control/bulk_msg: timeout > usb-ohci.c: unlink URB timeout > usb.c: USB device not accepting new address=3 (error=-145) > ------------------------------------------------------------------- > Has anyone experienced the same out there. Could any one suggest how > to debug this error. What could be the problem?. > > Thanks in advance. > > Regards, > aks > > _________________________________________________________________ > Add glamour to your desktop. Let your screen sizzle. > http://server1.msn.co.in/msnchannels/Entertainment/wallpaperhome.asp > Download the hottest wallpapers. > > >