Re: Linux Mips SGI O2 R5000 IP32 INSTALL

[Clownfish Internet <support@clownfishltd.com>]

Ilya - do you have a working version of arcboot - I am unable to get any 
versions that I have found to install and be able to read my primary HD 
volume header (50meg) -

I have found the following gentoo ebuild file:

http://dev.gentoo.org/~kumba/mips/misc/arcboot-0.3.8.1.ebuild

is there anyway I may use this to pull the package into my system ? - i 
havent managed it yet -

thanks


Ilya A. Volynets-Evenbakh wrote:

> Well, you are not the only one ;-)
> Currently you cannot use volume header for loading linux kernel due to 
> some
> very strange bug. I spent two weeks chsing it, and then decided that 
> my time
> is better spent elsewhere. Also, dents in my walls resulting from 
> contact between
> my head and walls' surface do not look nice. For now, you should 
> either use
> dhcp/bootp or arcboot. Latest version of arcboot (0.3.8.-something, 
> afair) should work out
> of the box with O2. If it doesn't, let me know - I'll dig out my 
> highly-hacked binary.
>
>    Ilya.
>
> Damian Presswell wrote:
>
>> Hi Ilya -
>>
>> thanks for coming back to me -
>>
>> I have managed to build a root filesystem using the gentoo sources 
>> that you suggested - however -
>> I am unable to boot off the hardisk -
>> I have fdisked the first scsi disk, created a 50 meg vlhdr, where I 
>> have copied my pre-compiled vmlinux binaries  -
>> it  appears to load and provide an entry point but then just hangs 
>> and goes no further -
>> I have also added the original netboot vmlinux  binary that I use to 
>> boot via tftpboot to the HD's volume header but it does the same 
>> thing - just hangs after the entry point -
>>
>> I can boot the system using bootp(): and the kernel binary located  
>> in  the tftpboot using  root=dev/sda3 - but  cannot figure why it  
>> doesnt seem to work off the volume header of the HD -
>>
>> once again -
>>
>> any help would be appreciated -
>>
>> thanks
>>
>>
>>
>> ilya@theIlya.com wrote:
>>
>>> Use Gentoo.
>>> Also, Glaurung's kernels are bit out-od-date. Use self-built
>>> kernel from recent linux-mips.org CVS. In worst case, use
>>> one of Gentoo's kernel binaries.
>>>
>>>     Ilya.
>>>
>>> On Mon, Apr 26, 2004 at 09:07:24PM +0100, Damian Presswell wrote:
>>>  
>>>
>>>> My apologies if this is the wrong mailing list for this question -
>>>>
>>>> I have recently aquired an SGI  O2 ip32 R5k box that I am trying to 
>>>> install linux onto -
>>>>
>>>> I have managed to get a binary 64bit kernel to boot vis nfs and 
>>>> bootp() that I downloaded from Glaurungs website:
>>>>
>>>> http://www.linux-mips.org/~glaurung/
>>>>
>>>> however I am unsure as to the correct rootfs that I am suposed to 
>>>> use - I pulled down the redhat 7.1 rootfs from somewhere but it 
>>>> hangs when trying to start the 'local' service - and wont boot if 
>>>> this service is switched off -
>>>>
>>>> I would be grateful if you could suggest where I may download a 
>>>> suitable rootfs and ecoff boot image that will work together on my 
>>>> O2 box - would hate to give in at this stage - and indeed any other 
>>>> help you may be able to give me as a linux mips O2 user - I will 
>>>> put together an updated HOWTO once I am sure exactly what I am 
>>>> supposed to be doing - the information and resources on this 
>>>> subject do seem to be a little vague -
>>>>
>>>> thanks for your time
>>>>
>>>> Damian
>>>
>>>
>


-- 


--------------------------------------------------------------------------------------------------------------
support@clownfishltd.com

Damian Presswell

(M) +44 07986 494824

(T)  +44 0845 1259523