From: Manish Lachwani <mlachwani@mvista.com>
To: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>, linux-mips@linux-mips.org
Subject: Re: [PATCH] 64-bit on Broadcom SWARM
Date: Mon, 18 Oct 2004 19:38:52 -0700 [thread overview]
Message-ID: <41747E3C.3000200@mvista.com> (raw)
In-Reply-To: <Pine.LNX.4.58L.0410182204280.12159@blysk.ds.pg.gda.pl>
Hello Maciej
This looks good. I have also tried it out on Broadcom SWARM for both
32-bit and 64-bit and it appears to work well.
Thanks
Manish Lachwani
Maciej W. Rozycki wrote:
>On Thu, 30 Sep 2004, Maciej W. Rozycki wrote:
>
>
>
>>>--- arch/mips/Makefile.orig 2004-09-30 09:49:45.000000000 -0700
>>>+++ arch/mips/Makefile 2004-09-30 09:50:27.000000000 -0700
>>>@@ -35,7 +35,7 @@
>>> endif
>>> ifdef CONFIG_MIPS64
>>> gcc-abi = 64
>>>-gas-abi = 32
>>>+gas-abi = 64
>>> tool-prefix = $(64bit-tool-prefix)
>>> UTS_MACHINE := mips64
>>> endif
>>>
>>>
>> I won't particularly mind having this change in, but there are apparently
>>people who want to have the current setting preserved. So I doubt this
>>part is going to be accepted. Please use `make "gas-abi=64" <whatever>'
>>instead.
>>
>> Alternatively, please let me check if I can get some time to implement
>>one of my to-do list goals, that is having it configurable.
>>
>>
>
> Here is a proposal for an implementation I've finally done. It adds a
>CONFIG_BUILD_ELF64 option for people to select whichever binary format
>suits them best.
>
> I've tested it with a gcc 3.5 snapshot and a binutils 2.15.91 snapshot
>for building using the 64-bit ELF binary format or binutils 2.13.2.1 for
>the 32-bit format. I've tested Malta and SWARM configurations. I have a
>version for 2.4 as well.
>
> The <asm/stackframe.h> fix is needed for binutils 2.13.2.1; it's a
>reasonable clean-up anyway.
>
> I consider the patch ready for inclusion, but I'll appreciate any
>feedback, whether positive or negative, as long as constructive.
>
> Maciej
>
>patch-mips-2.6.9-rc2-20040920-mips-elf64-5
>diff -up --recursive --new-file linux-mips-2.6.9-rc2-20040920.macro/arch/mips/Kconfig linux-mips-2.6.9-rc2-20040920/arch/mips/Kconfig
>--- linux-mips-2.6.9-rc2-20040920.macro/arch/mips/Kconfig 2004-09-01 03:57:35.000000000 +0000
>+++ linux-mips-2.6.9-rc2-20040920/arch/mips/Kconfig 2004-10-17 21:20:53.000000000 +0000
>@@ -1503,6 +1503,21 @@ config TRAD_SIGNALS
> bool
> default y if MIPS32
>
>+config BUILD_ELF64
>+ bool "Use 64-bit ELF format for building"
>+ depends on MIPS64
>+ help
>+ A 64-bit kernel is usually built using the 64-bit ELF binary object
>+ format as it's one that allows arbitrary 64-bit constructs. For
>+ kernels that are loaded within the KSEG compatibility segments the
>+ 32-bit ELF format can optionally be used resulting in a somewhat
>+ smaller binary, but this option is not explicitly supported by the
>+ toolchain and since binutils 2.14 it does not even work at all.
>+
>+ Say Y to use the 64-bit format or N to use the 32-bit one.
>+
>+ If unsure say Y.
>+
> config BINFMT_IRIX
> bool "Include IRIX binary compatibility"
> depends on !CPU_LITTLE_ENDIAN && MIPS32
>diff -up --recursive --new-file linux-mips-2.6.9-rc2-20040920.macro/arch/mips/Makefile linux-mips-2.6.9-rc2-20040920/arch/mips/Makefile
>--- linux-mips-2.6.9-rc2-20040920.macro/arch/mips/Makefile 2004-09-19 03:57:24.000000000 +0000
>+++ linux-mips-2.6.9-rc2-20040920/arch/mips/Makefile 2004-10-18 00:35:04.000000000 +0000
>@@ -5,13 +5,19 @@
> #
> # Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle
> # DECStation modifications by Paul M. Antoine, 1996
>-# Copyright (C) 2002, 2003 Maciej W. Rozycki
>+# Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
> #
> # This file is included by the global makefile so that you can add your own
> # architecture-specific flags and dependencies. Remember to do have actions
> # for "archclean" cleaning up for this architecture.
> #
>
>+as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
>+ -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
>+ else echo "$(2)"; fi ;)
>+
>+cflags-y :=
>+
> #
> # Select the object file format to substitute into the linker script.
> #
>@@ -29,13 +35,11 @@ endif
>
> ifdef CONFIG_MIPS32
> gcc-abi = 32
>-gas-abi = 32
> tool-prefix = $(32bit-tool-prefix)
> UTS_MACHINE := mips
> endif
> ifdef CONFIG_MIPS64
> gcc-abi = 64
>-gas-abi = 32
> tool-prefix = $(64bit-tool-prefix)
> UTS_MACHINE := mips64
> endif
>@@ -44,6 +48,20 @@ ifdef CONFIG_CROSSCOMPILE
> CROSS_COMPILE := $(tool-prefix)
> endif
>
>+ifdef CONFIG_BUILD_ELF64
>+gas-abi = 64
>+build-bfd = $(64bit-bfd)
>+vmlinux-32 = vmlinux.32
>+vmlinux-64 = vmlinux
>+else
>+gas-abi = 32
>+build-bfd = $(32bit-bfd)
>+vmlinux-32 = vmlinux
>+vmlinux-64 = vmlinux.64
>+
>+cflags-$(CONFIG_MIPS64) += $(call cc-option,-mno-explicit-relocs)
>+endif
>+
> #
> # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
> # code since it only slows down the whole thing. At some point we might make
>@@ -54,7 +72,7 @@ endif
> # machines may also. Since BFD is incredibly buggy with respect to
> # crossformat linking we rely on the elf2ecoff tool for format conversion.
> #
>-cflags-y := -I $(TOPDIR)/include/asm/gcc
>+cflags-y += -I $(TOPDIR)/include/asm/gcc
> cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
> cflags-y += $(call cc-option, -finline-limit=100000)
> LDFLAGS_vmlinux += -G 0 -static -n
>@@ -211,7 +229,7 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s
> #
> core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
> cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/asm-mips/mach-jazz
>-load-$(CONFIG_MACH_JAZZ) += 0x80080000
>+load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
>
> #
> # Common Alchemy Au1x00 stuff
>@@ -224,94 +242,94 @@ cflags-$(CONFIG_SOC_AU1X00) += -Iinclude
> #
> libs-$(CONFIG_MIPS_PB1000) += arch/mips/au1000/pb1000/
> cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00
>-load-$(CONFIG_MIPS_PB1000) += 0x80100000
>+load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000
>
> #
> # AMD Alchemy Pb1100 eval board
> #
> libs-$(CONFIG_MIPS_PB1100) += arch/mips/au1000/pb1100/
> cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00
>-load-$(CONFIG_MIPS_PB1100) += 0x80100000
>+load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000
>
> #
> # AMD Alchemy Pb1500 eval board
> #
> libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/
> cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00
>-load-$(CONFIG_MIPS_PB1500) += 0x80100000
>+load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000
>
> #
> # AMD Alchemy Pb1550 eval board
> #
> libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/
> cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00
>-load-$(CONFIG_MIPS_PB1550) += 0x80100000
>+load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
>
> #
> # AMD Alchemy Db1000 eval board
> #
> libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/
> cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00
>-load-$(CONFIG_MIPS_DB1000) += 0x80100000
>+load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000
>
> #
> # AMD Alchemy Db1100 eval board
> #
> libs-$(CONFIG_MIPS_DB1100) += arch/mips/au1000/db1x00/
> cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00
>-load-$(CONFIG_MIPS_DB1100) += 0x80100000
>+load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000
>
> #
> # AMD Alchemy Db1500 eval board
> #
> libs-$(CONFIG_MIPS_DB1500) += arch/mips/au1000/db1x00/
> cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00
>-load-$(CONFIG_MIPS_DB1500) += 0x80100000
>+load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000
>
> #
> # AMD Alchemy Db1550 eval board
> #
> libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/
> cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00
>-load-$(CONFIG_MIPS_DB1550) += 0x80100000
>+load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
>
> #
> # AMD Alchemy Bosporus eval board
> #
> libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/
> cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00
>-load-$(CONFIG_MIPS_BOSPORUS) += 0x80100000
>+load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000
>
> #
> # AMD Alchemy Mirage eval board
> #
> libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/au1000/db1x00/
> cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00
>-load-$(CONFIG_MIPS_MIRAGE) += 0x80100000
>+load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000
>
> #
> # 4G-Systems eval board
> #
> libs-$(CONFIG_MIPS_MTX1) += arch/mips/au1000/mtx-1/
>-load-$(CONFIG_MIPS_MTX1) += 0x80100000
>+load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
>
> #
> # MyCable eval board
> #
> libs-$(CONFIG_MIPS_XXS1500) += arch/mips/au1000/xxs1500/
>-load-$(CONFIG_MIPS_XXS1500) += 0x80100000
>+load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
>
> #
> # Baget/MIPS
> #
> libs-$(CONFIG_BAGET_MIPS) += arch/mips/baget/ arch/mips/baget/prom/
>-load-$(CONFIG_BAGET_MIPS) += 0x80001000
>+load-$(CONFIG_BAGET_MIPS) += 0xffffffff80001000
>
> #
> # Cobalt Server
> #
> core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
>-load-$(CONFIG_MIPS_COBALT) += 0x80080000
>+load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
>
> #
> # DECstation family
>@@ -319,7 +337,7 @@ load-$(CONFIG_MIPS_COBALT) += 0x80080000
> core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
> cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
> libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
>-load-$(CONFIG_MACH_DECSTATION) += 0x80040000
>+load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
> CLEAN_FILES += drivers/tc/lk201-map.c
>
> #
>@@ -328,33 +346,33 @@ CLEAN_FILES += drivers/tc/lk201-map.c
> core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/ev64120/
> core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/common/
> cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120
>-load-$(CONFIG_MIPS_EV64120) += 0x80100000
>+load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000
>
> #
> # Galileo EV96100 Board
> #
> core-$(CONFIG_MIPS_EV96100) += arch/mips/galileo-boards/ev96100/
> cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100
>-load-$(CONFIG_MIPS_EV96100) += 0x80100000
>+load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000
>
> #
> # Globespan IVR eval board with QED 5231 CPU
> #
> core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/
> core-$(CONFIG_MIPS_IVR) += arch/mips/ite-boards/ivr/
>-load-$(CONFIG_MIPS_IVR) += 0x80100000
>+load-$(CONFIG_MIPS_IVR) += 0xffffffff80100000
>
> #
> # HP LaserJet
> #
> core-$(CONFIG_HP_LASERJET) += arch/mips/hp-lj/
>-load-$(CONFIG_HP_LASERJET) += 0x80030000
>+load-$(CONFIG_HP_LASERJET) += 0xffffffff80030000
>
> #
> # ITE 8172 eval board with QED 5231 CPU
> #
> core-$(CONFIG_MIPS_ITE8172) += arch/mips/ite-boards/qed-4n-s01b/
>-load-$(CONFIG_MIPS_ITE8172) += 0x80100000
>+load-$(CONFIG_MIPS_ITE8172) += 0xffffffff80100000
>
> #
> # For all MIPS, Inc. eval boards
>@@ -367,20 +385,20 @@ core-$(CONFIG_MIPS_BOARDS_GEN) += arch/m
> core-$(CONFIG_MIPS_ATLAS) += arch/mips/mips-boards/atlas/
> cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas
> cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips
>-load-$(CONFIG_MIPS_ATLAS) += 0x80100000
>+load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000
>
> #
> # MIPS Malta board
> #
> core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/
> cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips
>-load-$(CONFIG_MIPS_MALTA) += 0x80100000
>+load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
>
> #
> # MIPS SEAD board
> #
> core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/
>-load-$(CONFIG_MIPS_SEAD) += 0x80100000
>+load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
>
> #
> # Momentum Ocelot board
>@@ -391,7 +409,7 @@ load-$(CONFIG_MIPS_SEAD) += 0x80100000
> core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \
> arch/mips/gt64120/momenco_ocelot/
> cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot
>-load-$(CONFIG_MOMENCO_OCELOT) += 0x80100000
>+load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000
>
> #
> # Momentum Ocelot-G board
>@@ -400,7 +418,7 @@ load-$(CONFIG_MOMENCO_OCELOT) += 0x80100
> # mips_io_port_base.
> #
> core-$(CONFIG_MOMENCO_OCELOT_G) += arch/mips/momentum/ocelot_g/
>-load-$(CONFIG_MOMENCO_OCELOT_G) += 0x80100000
>+load-$(CONFIG_MOMENCO_OCELOT_G) += 0xffffffff80100000
>
> #
> # Momentum Ocelot-C and -CS boards
>@@ -408,14 +426,14 @@ load-$(CONFIG_MOMENCO_OCELOT_G) += 0x801
> # The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
> # mips_io_port_base.
> core-$(CONFIG_MOMENCO_OCELOT_C) += arch/mips/momentum/ocelot_c/
>-load-$(CONFIG_MOMENCO_OCELOT_C) += 0x80100000
>+load-$(CONFIG_MOMENCO_OCELOT_C) += 0xffffffff80100000
>
> #
> # PMC-Sierra Yosemite
> #
> core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
> cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite
>-load-$(CONFIG_PMC_YOSEMITE) += 0x80100000
>+load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
>
> #
> # Momentum Jaguar ATX
>@@ -423,9 +441,9 @@ load-$(CONFIG_PMC_YOSEMITE) += 0x8010000
> core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
> cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja
> #ifdef CONFIG_JAGUAR_DMALOW
>-#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x88000000
>+#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff88000000
> #else
>-load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x80100000
>+load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000
> #endif
>
> #
>@@ -437,30 +455,30 @@ core-$(CONFIG_DDB5XXX_COMMON) += arch/mi
> # NEC DDB Vrc-5074
> #
> core-$(CONFIG_DDB5074) += arch/mips/ddb5xxx/ddb5074/
>-load-$(CONFIG_DDB5074) += 0x80080000
>+load-$(CONFIG_DDB5074) += 0xffffffff80080000
>
> #
> # NEC DDB Vrc-5476
> #
> core-$(CONFIG_DDB5476) += arch/mips/ddb5xxx/ddb5476/
>-load-$(CONFIG_DDB5476) += 0x80080000
>+load-$(CONFIG_DDB5476) += 0xffffffff80080000
>
> #
> # NEC DDB Vrc-5477
> #
> core-$(CONFIG_DDB5477) += arch/mips/ddb5xxx/ddb5477/
>-load-$(CONFIG_DDB5477) += 0x80100000
>+load-$(CONFIG_DDB5477) += 0xffffffff80100000
>
> core-$(CONFIG_LASAT) += arch/mips/lasat/
> cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat
>-load-$(CONFIG_LASAT) += 0x80000000
>+load-$(CONFIG_LASAT) += 0xffffffff80000000
>
> #
> # NEC Osprey (vr4181) board
> #
> core-$(CONFIG_NEC_OSPREY) += arch/mips/vr4181/common/ \
> arch/mips/vr4181/osprey/
>-load-$(CONFIG_NEC_OSPREY) += 0x80002000
>+load-$(CONFIG_NEC_OSPREY) += 0xffffffff80002000
>
> #
> # Common VR41xx
>@@ -472,70 +490,82 @@ cflags-$(CONFIG_MACH_VR41XX) += -Iinclud
> # ZAO Networks Capcella (VR4131)
> #
> core-$(CONFIG_ZAO_CAPCELLA) += arch/mips/vr41xx/zao-capcella/
>-load-$(CONFIG_ZAO_CAPCELLA) += 0x80000000
>+load-$(CONFIG_ZAO_CAPCELLA) += 0xffffffff80000000
>
> #
> # Victor MP-C303/304 (VR4122)
> #
> core-$(CONFIG_VICTOR_MPC30X) += arch/mips/vr41xx/victor-mpc30x/
>-load-$(CONFIG_VICTOR_MPC30X) += 0x80001000
>+load-$(CONFIG_VICTOR_MPC30X) += 0xffffffff80001000
>
> #
> # IBM WorkPad z50 (VR4121)
> #
> core-$(CONFIG_IBM_WORKPAD) += arch/mips/vr41xx/ibm-workpad/
>-load-$(CONFIG_IBM_WORKPAD) += 0x80004000
>+load-$(CONFIG_IBM_WORKPAD) += 0xffffffff80004000
>
> #
> # CASIO CASSIPEIA E-55/65 (VR4111)
> #
> core-$(CONFIG_CASIO_E55) += arch/mips/vr41xx/casio-e55/
>-load-$(CONFIG_CASIO_E55) += 0x80004000
>+load-$(CONFIG_CASIO_E55) += 0xffffffff80004000
>
> #
> # TANBAC TB0226 Mbase (VR4131)
> #
> core-$(CONFIG_TANBAC_TB0226) += arch/mips/vr41xx/tanbac-tb0226/
>-load-$(CONFIG_TANBAC_TB0226) += 0x80000000
>+load-$(CONFIG_TANBAC_TB0226) += 0xffffffff80000000
>
> #
> # TANBAC TB0229 VR4131DIMM (VR4131)
> #
> core-$(CONFIG_TANBAC_TB0229) += arch/mips/vr41xx/tanbac-tb0229/
>-load-$(CONFIG_TANBAC_TB0229) += 0x80000000
>+load-$(CONFIG_TANBAC_TB0229) += 0xffffffff80000000
>
> #
> # SGI IP22 (Indy/Indigo2)
> #
>-# Set the load address to >= 0x88069000 if you want to leave space for symmon,
>-# 0x80002000 for production kernels. Note that the value must be aligned to
>-# a multiple of the kernel stack size or the handling of the current variable
>-# will break so for 64-bit kernels we have to raise the start address by 8kb.
>+# Set the load address to >= 0xffffffff88069000 if you want to leave space for
>+# symmon, 0xffffffff80002000 for production kernels. Note that the value must
>+# be aligned to a multiple of the kernel stack size or the handling of the
>+# current variable will break so for 64-bit kernels we have to raise the start
>+# address by 8kb.
> #
> core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/
> cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22
> ifdef CONFIG_MIPS32
>-load-$(CONFIG_SGI_IP22) += 0x88002000
>+load-$(CONFIG_SGI_IP22) += 0xffffffff88002000
> endif
> ifdef CONFIG_MIPS64
>-load-$(CONFIG_SGI_IP22) += 0x88004000
>+load-$(CONFIG_SGI_IP22) += 0xffffffff88004000
> endif
>
> #
> # SGI-IP27 (Origin200/2000)
> #
> # Set the load address to >= 0xc000000000300000 if you want to leave space for
>-# symmon, 0xc00000000001c000 for production kernels. Note that the value
>-# must be 16kb aligned or the handling of the current variable will break.
>+# symmon, 0xc00000000001c000 for production kernels. Note that the value must
>+# be 16kb aligned or the handling of the current variable will break.
> #
> ifdef CONFIG_SGI_IP27
> core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/
> cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27
>-#load-$(CONFIG_SGI_IP27) += 0xa80000000001c000
>+ifdef CONFIG_BUILD_ELF64
>+ifdef CONFIG_MAPPED_KERNEL
>+load-$(CONFIG_SGI_IP27) += 0xc00000004001c000
>+OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000
>+else
>+load-$(CONFIG_SGI_IP27) += 0xa80000000001c000
>+OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000
>+endif
>+else
> ifdef CONFIG_MAPPED_KERNEL
>-load-$(CONFIG_SGI_IP27) += 0xc001c000
>+load-$(CONFIG_SGI_IP27) += 0xffffffffc001c000
>+OBJCOPYFLAGS := --change-addresses=0xc000000080000000
> else
>-load-$(CONFIG_SGI_IP27) += 0x8001c000
>+load-$(CONFIG_SGI_IP27) += 0xffffffff8001c000
>+OBJCOPYFLAGS := --change-addresses=0xa800000080000000
>+endif
> endif
> endif
>
>@@ -543,13 +573,13 @@ endif
> # SGI-IP32 (O2)
> #
> # Set the load address to >= 80069000 if you want to leave space for symmon,
>-# 0x80004000 for production kernels. Note that the value must be aligned to
>+# 0xffffffff80004000 for production kernels. Note that the value must be aligned to
> # a multiple of the kernel stack size or the handling of the current variable
> # will break.
> #
> core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/
> cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32
>-load-$(CONFIG_SGI_IP32) += 0x80004000
>+load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
>
> #
> # Sibyte SB1250 SOC
>@@ -572,31 +602,31 @@ cflags-$(CONFIG_SIBYTE_SB1250) += -Iincl
> # Sibyte SWARM board
> #
> libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
>-load-$(CONFIG_SIBYTE_CARMEL) := 0x80100000
>+load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
> libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
>-load-$(CONFIG_SIBYTE_CRHINE) := 0x80100000
>+load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
> libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
>-load-$(CONFIG_SIBYTE_CRHONE) := 0x80100000
>+load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
> libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
>-load-$(CONFIG_SIBYTE_RHONE) := 0x80100000
>+load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
> libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
>-load-$(CONFIG_SIBYTE_SENTOSA) := 0x80100000
>+load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
> libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
>-load-$(CONFIG_SIBYTE_SWARM) := 0x80100000
>+load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
>
> #
> # SNI RM200 PCI
> #
> core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
> cflags-$(CONFIG_SNI_RM200_PCI) += -Iinclude/asm-mips/mach-rm200
>-load-$(CONFIG_SNI_RM200_PCI) += 0x80600000
>+load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000
>
> #
> # Toshiba JMR-TX3927 board
> #
> core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \
> arch/mips/jmr3927/common/
>-load-$(CONFIG_TOSHIBA_JMR3927) += 0x80050000
>+load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000
>
> #
> # Toshiba RBTX4927 board or
>@@ -604,21 +634,12 @@ load-$(CONFIG_TOSHIBA_JMR3927) += 0x8005
> #
> core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/
> core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/
>-load-$(CONFIG_TOSHIBA_RBTX4927) += 0x80020000
>+load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000
>
> cflags-y += -Iinclude/asm-mips/mach-generic
> drivers-$(CONFIG_PCI) += arch/mips/pci/
>
> ifdef CONFIG_MIPS32
>-build-bfd = $(32bit-bfd)
>-cflags-y += $(32bit-isa-y)
>-endif
>-ifdef CONFIG_MIPS64
>-build-bfd = $(64bit-bfd)
>-cflags-y += $(64bit-isa-y)
>-endif
>-
>-ifdef CONFIG_MIPS32
> ifdef CONFIG_CPU_LITTLE_ENDIAN
> JIFFIES = jiffies_64
> else
>@@ -628,21 +649,12 @@ else
> JIFFIES = jiffies_64
> endif
>
>-#
>-# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
>-# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
>-# convert to ECOFF using elf2ecoff.
>-#
>-# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
>-# ELF files from 32-bit files by conversion.
>-#
>-#AS += -64
>-#LDFLAGS += -m elf64bmip
>-
> AFLAGS += $(cflags-y)
> CFLAGS += $(cflags-y)
>
>-LDFLAGS += --oformat $(32bit-bfd)
>+LDFLAGS += --oformat $(build-bfd)
>+
>+OBJCOPYFLAGS += --remove-section=.reginfo
>
> #
> # Choosing incompatible machines durings configuration will result in
>@@ -678,30 +690,39 @@ rom.bin rom.sw: vmlinux
> $(call descend,arch/mips/lasat/image,$@)
> endif
>
>-ifdef CONFIG_MAPPED_KERNEL
>-vmlinux.64: vmlinux
>- $(OBJCOPY) -O $(64bit-bfd) --remove-section=.reginfo \
>- --change-addresses=0xc000000080000000 $< $@
>-else
>+#
>+# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
>+# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
>+# convert to ECOFF using elf2ecoff.
>+#
>+vmlinux.32: vmlinux
>+ $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
>+
>+#
>+# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
>+# ELF files from 32-bit files by conversion.
>+#
> vmlinux.64: vmlinux
>- $(OBJCOPY) -O $(64bit-bfd) --remove-section=.reginfo \
>- --change-addresses=0xa800000080000000 $< $@
>-endif
>+ $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
>
>-makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot $(1)
>+makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
>
>-ifdef CONFIG_SGI_IP27
>-all: vmlinux.64
>+ifdef CONFIG_BOOT_ELF32
>+all: $(vmlinux-32)
>+endif
>+
>+ifdef CONFIG_BOOT_ELF64
>+all: $(vmlinux-64)
> endif
>
> ifdef CONFIG_SNI_RM200_PCI
> all: vmlinux.ecoff
> endif
>
>-vmlinux.ecoff vmlinux.rm200: vmlinux
>+vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
> +@$(call makeboot,$@)
>
>-vmlinux.srec: vmlinux
>+vmlinux.srec: $(vmlinux-32)
> +@$(call makeboot,$@)
>
> CLEAN_FILES += vmlinux.ecoff \
>@@ -766,5 +787,6 @@ CLEAN_FILES += include/asm-$(ARCH)/offse
> include/asm-$(ARCH)/offset.h \
> include/asm-$(ARCH)/reg.h.tmp \
> include/asm-$(ARCH)/reg.h \
>+ vmlinux.32 \
> vmlinux.64 \
> vmlinux.ecoff
>diff -up --recursive --new-file linux-mips-2.6.9-rc2-20040920.macro/arch/mips/boot/Makefile linux-mips-2.6.9-rc2-20040920/arch/mips/boot/Makefile
>--- linux-mips-2.6.9-rc2-20040920.macro/arch/mips/boot/Makefile 2004-05-27 03:57:24.000000000 +0000
>+++ linux-mips-2.6.9-rc2-20040920/arch/mips/boot/Makefile 2004-10-17 21:45:45.000000000 +0000
>@@ -4,6 +4,7 @@
> # for more details.
> #
> # Copyright (C) 1995, 1998, 2001, 2002 by Ralf Baechle
>+# Copyright (C) 2004 Maciej W. Rozycki
> #
>
> #
>@@ -19,29 +20,30 @@ endif
> # Drop some uninteresting sections in the kernel.
> # This is only relevant for ELF kernels but doesn't hurt a.out
> #
>-drop-sections = .reginfo .mdebug .comment .note .pdr
>+drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
> strip-flags = $(addprefix --remove-section=,$(drop-sections))
>
>+VMLINUX = vmlinux
>+
> all: vmlinux.ecoff vmlinux.srec addinitrd
>
>-vmlinux.ecoff: $(obj)/elf2ecoff vmlinux
>- $(obj)/elf2ecoff vmlinux vmlinux.ecoff $(E2EFLAGS)
>+vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
>+ $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
>
> $(obj)/elf2ecoff: $(obj)/elf2ecoff.c
> $(HOSTCC) -o $@ $^
>
>-vmlinux.srec: vmlinux
>- $(OBJCOPY) -S -O srec $(strip-flags) vmlinux $(obj)/vmlinux.srec
>+vmlinux.srec: $(VMLINUX)
>+ $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
>
> $(obj)/addinitrd: $(obj)/addinitrd.c
> $(HOSTCC) -o $@ $^
>
> archhelp:
> @echo '* vmlinux.ecoff - ECOFF boot image'
>+ @echo '* vmlinux.srec - SREC boot image'
>
> clean-files += addinitrd \
> elf2ecoff \
> vmlinux.ecoff \
>- vmlinux.srec \
>- zImage.tmp \
>- zImage
>+ vmlinux.srec
>diff -up --recursive --new-file linux-mips-2.6.9-rc2-20040920.macro/arch/mips/kernel/vmlinux.lds.S linux-mips-2.6.9-rc2-20040920/arch/mips/kernel/vmlinux.lds.S
>--- linux-mips-2.6.9-rc2-20040920.macro/arch/mips/kernel/vmlinux.lds.S 2004-09-20 03:58:10.000000000 +0000
>+++ linux-mips-2.6.9-rc2-20040920/arch/mips/kernel/vmlinux.lds.S 2004-10-17 22:48:01.000000000 +0000
>@@ -87,6 +87,8 @@ SECTIONS
> __init_begin = .;
> /* /DISCARD/ doesn't work for .reginfo */
> .reginfo : { *(.reginfo) }
>+ .options : { *(.options) }
>+ .MIPS.options : { *(.MIPS.options) }
> .init.text : {
> _sinittext = .;
> *(.init.text)
>diff -up --recursive --new-file linux-mips-2.6.9-rc2-20040920.macro/include/asm-mips/stackframe.h linux-mips-2.6.9-rc2-20040920/include/asm-mips/stackframe.h
>--- linux-mips-2.6.9-rc2-20040920.macro/include/asm-mips/stackframe.h 2004-05-28 03:57:55.000000000 +0000
>+++ linux-mips-2.6.9-rc2-20040920/include/asm-mips/stackframe.h 2004-10-18 00:46:31.000000000 +0000
>@@ -68,7 +68,7 @@
> MFC0 k1, CP0_CONTEXT
> dsra k1, 23
> lui k0, %hi(pgd_current)
>- daddiu k0, %lo(pgd_current)
>+ addiu k0, %lo(pgd_current)
> dsubu k1, k0
> lui k0, %hi(kernelsp)
> daddu k1, k0
>
>
prev parent reply other threads:[~2004-10-19 2:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-30 16:56 [PATCH] 64-bit on Broadcom SWARM Manish Lachwani
2004-09-30 17:36 ` Maciej W. Rozycki
2004-10-19 0:19 ` Maciej W. Rozycki
2004-10-19 2:38 ` Manish Lachwani [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41747E3C.3000200@mvista.com \
--to=mlachwani@mvista.com \
--cc=linux-mips@linux-mips.org \
--cc=macro@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox