Re: Error on TX descriptor free

[Manish Lachwani <mlachwani@mvista.com>]

Hello Thomas

Thats a bug. I dont have a board to try this on. But, can you?

Thomas Petazzoni wrote:
> Hello,
> 
> I'm currently using the MV643xx Ethernet driver on my board. When I run 
> the command :
> 
> # ifconfig eth0 down
> 
> I see the following message :
> 
> eth0: Error on Tx descriptor free - could not free 1 descriptors
> 
> I went through the code, and saw that this message is displayed in 
> mv64340_eth_free_tx_rings(). This function frees all remaining skbs 
> (registered in the mp->tx_skb array), and decrement mp->tx_ring_skbs. 
> Then, it checks if it reached 0. In my case, it is still 1.
> 
> In fact, mp->tx_ring_skbs is initialized to 0 and then incremented in 
> mv64340_eth_start_xmit() (when a transmission starts), and is 
> decremented in mv64340_eth_free_tx_queue (when the transmission is 
> done). But the decrementation only occurs if mp->tx_ring_skbs is 
> different from one. I don't understand why.
> 
> At the end of mv64340_eth_free_tx_queue(), the following code makes sure 
> that the number of skbs did not reach 0 :
> 
>     if (mp->tx_ring_skbs == 0)
>       panic("ERROR - TX outstanding SKBs counter is corrupted");
> 
> Well, my question is simply : why can't we decrement the 
> mp->tx_ring_skbs counter to 0 ?
> 
> What needs to be fixed ? The decrementation of the counter, or the 
> function that frees the TX queue when the interface is stopped ?

Decrement the counter to zero as you suggested. And remove the 
panic("..") in mv64340_eth_free_tx_queue(). Let me know if it works fine

Thanks
Manish Lachwani



> 
> I've seen similar code in the Titan GE driver.
> 
> Do not hesitate to ask for further details,
> 
> Thanks,
> 
> Thomas