From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Wed, 19 Jan 2005 09:25:29 +0000 (GMT) Received: from gw.voda.cz ([IPv6:::ffff:212.24.154.90]:2505 "EHLO kojot.voda.cz") by linux-mips.org with ESMTP id ; Wed, 19 Jan 2005 09:25:23 +0000 Received: from localhost (localhost [127.0.0.1]) by kojot.voda.cz (Postfix) with ESMTP id 218D84CB41 for ; Wed, 19 Jan 2005 10:25:22 +0100 (CET) Received: from kojot.voda.cz ([127.0.0.1]) by localhost (kojot [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 10027-03 for ; Wed, 19 Jan 2005 10:25:20 +0100 (CET) Received: from [10.1.1.77] (unknown [10.1.1.77]) by kojot.voda.cz (Postfix) with ESMTP id D0D674BE8D for ; Wed, 19 Jan 2005 10:25:19 +0100 (CET) Message-ID: <41EE277F.5090002@voda.cz> Date: Wed, 19 Jan 2005 10:25:19 +0100 From: =?ISO-8859-2?Q?Tom_Vr=E1na?= Organization: VODA IT consulting User-Agent: Mozilla Thunderbird 0.6 (X11/20040502) X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-mips@ftp.linux-mips.org Subject: porting to ADM5120 Content-Type: text/plain; charset=ISO-8859-2; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: by amavisd-new at voda.cz Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@ftp.linux-mips.org Original-Recipient: rfc822;linux-mips@ftp.linux-mips.org X-archive-position: 6948 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: tom@voda.cz Precedence: bulk X-list: linux-mips Hi, I am working on solution using ADM5120 SoC (a 4kc MIPS). I as well have docs for the SoC and patched kernel 2.4.18 sources that I am able to compile, make image anf run on the system. The problem is that I need to have some more recent kernel, eg. 2.4.27. I have diffing out all the relevant changes from the old version and include them in cvs check-out version 2.4.27. After some cleanup, I got it to compile, but the image just doesn't do anything when run on the SoC. It says jump to linux code... and dies. I have checked just about everything that I can ( and at least a bit understand) including the early printk patch. Not a single byte of output on the serial console. The question is, whether there is someone, who could possibly help to look into this, as assembly code level is really not my skill, but I really need to get the kernel running and I feel like I'm out of options. Any help will be greatly appreciated. TIA, Tom -- Tomas Vrana -------------------------- VODA IT consulting, Borkovany 48, 691 75 http://www.voda.cz/ phone: +420 519 419 416 mobile: +420 603 469 305 UIN: 105142752