Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Maxim Moroz <maxim@kde.ru>
To: linux-mips@linux-mips.org
Subject: Re: framebuffer for au1000 based board.
Date: Sat, 03 Sep 2005 08:16:04 +0400	[thread overview]
Message-ID: <43192384.6010308@kde.ru> (raw)
In-Reply-To: <e603bacb50427983d7330a58abccb4fa@embeddedalley.com>

Dan Malek пишет:

>
> On Sep 2, 2005, at 10:31 PM, Maxim Moroz wrote:
>
>> Hello, I'm writing framebuffer (800x600@16bpp) for au1000 based board 
>> for latest linux-2.6.13 mips kernel.
>> video memory is located at address 0xbe00_0000.
>> The problem is that I cannot correctly mmap video memory to userspace.
>
>
> What happens if you just use /dev/mem and that address?
>
>> mmap was taken from au1500 lcd framebuffer driver(code follows)
>
>
> Bad choice. Neither the Au1000 nor the Au1500 have internal frame
> buffers, so in both cases these are going to be board specific devices.
> Since the Au1500 has a PCI bridge, I suspect that driver is designed
> to work with the 36-bit address from the Au1500 core. You are going
> to have to write a custom mmap() function that does the proper mapping
> for your board design. Also, the Au1000 had some challenging bus
> interface issues to things like graphics controllers and you have to
> choose the proper memory controller configuration and hardware
> design to even have a chance at this working.
>
> Good Luck, you may have lots of work ahead of you very specific
> to your board design :-)
>
>
> -- Dan

The choice is not bad. au1000 also has 36 bit addresses.
I was toooooo bad using address 0xbe00_0000.
changed to 0x1e00_0000 and got working video.
Thanks all who made such perfect port to au1x00 processors!
Really pleased to work with them... Heh.. Tried blackfin some time ago.
that was horrible :-D

He-he, board is almost working already.

Best Regards,
Maxim Moroz.

  reply	other threads:[~2005-09-03  4:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-09-03  2:31 framebuffer for au1000 based board Maxim Moroz
2005-09-03  4:05 ` Dan Malek
2005-09-03  4:16   ` Maxim Moroz [this message]
2005-09-03  4:54     ` Pete Popov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43192384.6010308@kde.ru \
    --to=maxim@kde.ru \
    --cc=linux-mips@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox