From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Manish Lachwani <mlachwani@mvista.com>
Subject: [PATCH] RBTX4938: make RTL8019AS work when CONFIG_PCI=n
Date: Mon, 08 May 2006 22:19:20 +0400 [thread overview]
Message-ID: <445F8BA8.8050006@ru.mvista.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 225 bytes --]
This patch should make the on-board Ethernet chip (Realtek RTL8019AS) work
when CONFIG_PCI is disabled...
Signed-off-by: Yuri Shpilevsky <yshpilevsky@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[-- Attachment #2: RBTX4938-fix-IO-port-base.patch --]
[-- Type: text/plain, Size: 479 bytes --]
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
index 5c7ace9..a96d442 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -918,7 +918,7 @@ void __init toshiba_rbtx4938_setup(void)
TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */
#ifndef CONFIG_PCI
- set_io_port_base(RBTX4938_ETHER_BASE);
+ set_io_port_base(KSEG1);
#endif
#ifdef CONFIG_SERIAL_TXX9
reply other threads:[~2006-05-08 18:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=445F8BA8.8050006@ru.mvista.com \
--to=sshtylyov@ru.mvista.com \
--cc=linux-mips@linux-mips.org \
--cc=mlachwani@mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox