From: Kumba <kumba@gentoo.org>
To: Linux MIPS List <linux-mips@linux-mips.org>
Subject: [PATCH]: Add support for R14K Processors
Date: Tue, 16 May 2006 22:23:59 -0400 [thread overview]
Message-ID: <446A893F.20600@gentoo.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 1052 bytes --]
Attached is an updated patch that adds support for R14K processors. Currently,
the only system that can really make use of this is an Octane, but this allows
the processor to at least be detectable.
Tested on a 2.6.16.13 kernel
# cat /proc/cpuinfo
system type : SGI Octane
processor : 0
cpu model : R14000 V2.3 FPU V0.0
BogoMIPS : 821.24
byteorder : big endian
wait instruction : no
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes
ASEs implemented :
VCED exceptions : not available
VCEI exceptions : not available
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
---
arch/mips/kernel/cpu-probe.c | 9 +++++++++
arch/mips/kernel/proc.c | 1 +
arch/mips/mm/c-r4k.c | 4 ++++
arch/mips/mm/pg-r4k.c | 1 +
arch/mips/mm/tlbex.c | 1 +
include/asm-mips/cpu.h | 4 +++-
6 files changed, 19 insertions(+), 1 deletion(-)
[-- Attachment #2: r14k-support.patch --]
[-- Type: text/plain, Size: 3720 bytes --]
diff -Naurp mipslinux/arch/mips/kernel/cpu-probe.c mipslinux.r14k/arch/mips/kernel/cpu-probe.c
--- mipslinux/arch/mips/kernel/cpu-probe.c 2006-05-11 16:54:33.000000000 -0400
+++ mipslinux.r14k/arch/mips/kernel/cpu-probe.c 2006-05-16 21:08:42.000000000 -0400
@@ -439,6 +439,15 @@ static inline void cpu_probe_legacy(stru
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
+ case PRID_IMP_R14000:
+ c->cputype = CPU_R14000;
+ c->isa_level = MIPS_CPU_ISA_IV;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+ MIPS_CPU_LLSC;
+ c->tlbsize = 64;
+ break;
}
}
diff -Naurp mipslinux/arch/mips/kernel/proc.c mipslinux.r14k/arch/mips/kernel/proc.c
--- mipslinux/arch/mips/kernel/proc.c 2006-05-11 16:54:33.000000000 -0400
+++ mipslinux.r14k/arch/mips/kernel/proc.c 2006-05-16 21:08:42.000000000 -0400
@@ -42,6 +42,7 @@ static const char *cpu_name[] = {
[CPU_R8000] = "R8000",
[CPU_R10000] = "R10000",
[CPU_R12000] = "R12000",
+ [CPU_R14000] = "R14000",
[CPU_R4300] = "R4300",
[CPU_R4650] = "R4650",
[CPU_R4700] = "R4700",
diff -Naurp mipslinux/arch/mips/mm/c-r4k.c mipslinux.r14k/arch/mips/mm/c-r4k.c
--- mipslinux/arch/mips/mm/c-r4k.c 2006-05-12 13:31:39.000000000 -0400
+++ mipslinux.r14k/arch/mips/mm/c-r4k.c 2006-05-16 21:08:42.000000000 -0400
@@ -343,6 +343,7 @@ static inline void local_r4k___flush_cac
case CPU_R4400MC:
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
r4k_blast_scache();
}
}
@@ -841,6 +842,7 @@ static void __init probe_pcache(void)
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
c->icache.linesz = 64;
c->icache.ways = 2;
@@ -994,6 +996,7 @@ static void __init probe_pcache(void)
c->dcache.flags |= MIPS_CACHE_PINDEX;
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
case CPU_SB1:
break;
case CPU_24K:
@@ -1121,6 +1124,7 @@ static void __init setup_scache(void)
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
c->scache.linesz = 64 << ((config >> 13) & 1);
c->scache.ways = 2;
diff -Naurp mipslinux/arch/mips/mm/pg-r4k.c mipslinux.r14k/arch/mips/mm/pg-r4k.c
--- mipslinux/arch/mips/mm/pg-r4k.c 2006-05-05 20:49:54.000000000 -0400
+++ mipslinux.r14k/arch/mips/mm/pg-r4k.c 2006-05-16 21:08:42.000000000 -0400
@@ -357,6 +357,7 @@ void __init build_clear_page(void)
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
pref_src_mode = Pref_LoadStreamed;
pref_dst_mode = Pref_StoreStreamed;
break;
diff -Naurp mipslinux/arch/mips/mm/tlbex.c mipslinux.r14k/arch/mips/mm/tlbex.c
--- mipslinux/arch/mips/mm/tlbex.c 2006-05-11 16:54:33.000000000 -0400
+++ mipslinux.r14k/arch/mips/mm/tlbex.c 2006-05-16 21:08:42.000000000 -0400
@@ -875,6 +875,7 @@ static __init void build_tlb_write_entry
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
case CPU_4KC:
case CPU_SB1:
case CPU_SB1A:
diff -Naurp mipslinux/include/asm-mips/cpu.h mipslinux.r14k/include/asm-mips/cpu.h
--- mipslinux/include/asm-mips/cpu.h 2006-05-11 16:54:36.000000000 -0400
+++ mipslinux.r14k/include/asm-mips/cpu.h 2006-05-16 21:09:26.000000000 -0400
@@ -51,6 +51,7 @@
#define PRID_IMP_R4300 0x0b00
#define PRID_IMP_VR41XX 0x0c00
#define PRID_IMP_R12000 0x0e00
+#define PRID_IMP_R14000 0x0f00
#define PRID_IMP_R8000 0x1000
#define PRID_IMP_PR4450 0x1200
#define PRID_IMP_R4600 0x2000
@@ -198,7 +199,8 @@
#define CPU_PR4450 61
#define CPU_SB1A 62
#define CPU_74K 63
-#define CPU_LAST 63
+#define CPU_R14000 64
+#define CPU_LAST 64
/*
* ISA Level encodings
reply other threads:[~2006-05-17 2:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=446A893F.20600@gentoo.org \
--to=kumba@gentoo.org \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox