From: Mark Zhan <rongkai.zhan@windriver.com>
To: i2c@lm-sensors.org, linux-mips@linux-mips.org,
rtc-linux@googlegroups.com
Cc: ralf@linux-mips.org, a.zummo@towertech.it, rongkai.zhan@windriver.com
Subject: [PATCH 2/4] RTC: make m41t80 driver can work with the SMBus adapters
Date: Sun, 30 Sep 2007 17:54:54 +0800 [thread overview]
Message-ID: <46FF726E.4020200@windriver.com> (raw)
This patch makes m41t80 RTC driver also can work with the SMBus adapters,
which doesn't i2c_transfer() method.
Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com>
---
drivers/rtc/rtc-m41t80.c | 118 ++++++++++++++++++++++++-----------------------
1 file changed, 62 insertions(+), 56 deletions(-)
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -105,6 +105,51 @@ struct m41t80_data {
struct rtc_device *rtc;
};
+static int m41t80_i2c_read(struct i2c_client *client, struct i2c_msg *msgs, int num)
+{
+ int i, rc;
+ u8 dt_addr = msgs[0].buf[0];
+
+ if (num < 2)
+ return -1;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) &&
+ i2c_transfer(client->adapter, msgs, 2) < 0) {
+ dev_err(&client->dev, "read error\n");
+ return -EIO;
+ } else {
+ for (i = 0; i < msgs[1].len; i++) {
+ rc = i2c_smbus_read_byte_data(client, dt_addr + i);
+ if (rc < 0)
+ return -EIO;
+ msgs[1].buf[i] = (u8)rc;
+ }
+ }
+
+ return 0;
+}
+
+static int m41t80_i2c_write(struct i2c_client *client, struct i2c_msg *msg)
+{
+ int i, rc;
+ u8 *wbuf = msg->buf;
+ u8 *buf = wbuf + 1;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) &&
+ i2c_transfer(client->adapter, msg, 1) < 0) {
+ dev_err(&client->dev, "write error\n");
+ return -EIO;
+ } else {
+ for (i = 0; i < msg[0].len - 1; i++) {
+ rc = i2c_smbus_write_byte_data(client, wbuf[0]+i, buf[i]);
+ if (rc < 0)
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
static int m41t80_get_datetime(struct i2c_client *client,
struct rtc_time *tm)
{
@@ -124,10 +169,8 @@ static int m41t80_get_datetime(struct i2
},
};
- if (i2c_transfer(client->adapter, msgs, 2) < 0) {
- dev_err(&client->dev, "read error\n");
+ if (m41t80_i2c_read(client, msgs, 2))
return -EIO;
- }
tm->tm_sec = BCD2BIN(buf[M41T80_REG_SEC] & 0x7f);
tm->tm_min = BCD2BIN(buf[M41T80_REG_MIN] & 0x7f);
@@ -171,10 +214,8 @@ static int m41t80_set_datetime(struct i2
};
/* Read current reg values into buf[1..7] */
- if (i2c_transfer(client->adapter, msgs_in, 2) < 0) {
- dev_err(&client->dev, "read error\n");
+ if (m41t80_i2c_read(client, msgs_in, 2))
return -EIO;
- }
wbuf[0] = 0; /* offset into rtc's regs */
/* Merge time-data and register flags into buf[0..7] */
@@ -194,10 +235,9 @@ static int m41t80_set_datetime(struct i2
/* assume 20YY not 19YY */
buf[M41T80_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
- if (i2c_transfer(client->adapter, msgs, 1) != 1) {
- dev_err(&client->dev, "write error\n");
+ if (m41t80_i2c_write(client, msgs))
return -EIO;
- }
+
return 0;
}
@@ -295,10 +335,9 @@ static int m41t80_rtc_set_alarm(struct d
},
};
- if (i2c_transfer(client->adapter, msgs_in, 2) < 0) {
- dev_err(&client->dev, "read error\n");
+ if (m41t80_i2c_read(client, msgs_in, 2))
return -EIO;
- }
+
reg[M41T80_REG_ALARM_MON] &= ~(0x1f | M41T80_ALMON_AFE);
reg[M41T80_REG_ALARM_DAY] = 0;
reg[M41T80_REG_ALARM_HOUR] &= ~(0x3f | 0x80);
@@ -319,10 +358,8 @@ static int m41t80_rtc_set_alarm(struct d
else
reg[M41T80_REG_ALARM_DAY] |= 0x40;
- if (i2c_transfer(client->adapter, msgs, 1) != 1) {
- dev_err(&client->dev, "write error\n");
+ if (m41t80_i2c_write(client, msgs))
return -EIO;
- }
if (t->enabled) {
reg[M41T80_REG_ALARM_MON] |= M41T80_ALMON_AFE;
@@ -356,10 +393,9 @@ static int m41t80_rtc_read_alarm(struct
},
};
- if (i2c_transfer(client->adapter, msgs, 2) < 0) {
- dev_err(&client->dev, "read error\n");
+ if (m41t80_i2c_read(client, msgs, 2))
return -EIO;
- }
+
t->time.tm_sec = -1;
t->time.tm_min = -1;
t->time.tm_hour = -1;
@@ -516,14 +552,7 @@ static int boot_flag;
static void wdt_ping(void)
{
unsigned char i2c_data[2];
- struct i2c_msg msgs1[1] = {
- {
- .addr = save_client->addr,
- .flags = 0,
- .len = 2,
- .buf = i2c_data,
- },
- };
+
i2c_data[0] = 0x09; /* watchdog register */
if (wdt_margin > 31)
@@ -534,7 +563,7 @@ static void wdt_ping(void)
*/
i2c_data[1] = wdt_margin<<2 | 0x82;
- i2c_transfer(save_client->adapter, msgs1, 1);
+ i2c_smbus_write_byte_data(save_client, i2c_data[0], i2c_data[1]);
}
/**
@@ -544,36 +573,14 @@ static void wdt_ping(void)
*/
static void wdt_disable(void)
{
- unsigned char i2c_data[2], i2c_buf[0x10];
- struct i2c_msg msgs0[2] = {
- {
- .addr = save_client->addr,
- .flags = 0,
- .len = 1,
- .buf = i2c_data,
- },
- {
- .addr = save_client->addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = i2c_buf,
- },
- };
- struct i2c_msg msgs1[1] = {
- {
- .addr = save_client->addr,
- .flags = 0,
- .len = 2,
- .buf = i2c_data,
- },
- };
+ unsigned char i2c_data[2];
- i2c_data[0] = 0x09;
- i2c_transfer(save_client->adapter, msgs0, 2);
+ i2c_data[0] = 0x09; /* watchdog register */
+ i2c_data[1] = i2c_smbus_read_byte_data(save_client, i2c_data[0]);
- i2c_data[0] = 0x09;
+ /* write 0x00 to disable WDT until it is programmed again. */
i2c_data[1] = 0x00;
- i2c_transfer(save_client->adapter, msgs1, 1);
+ i2c_smbus_read_byte_datasave_client, i2c_data[0], i2c_data[1]);
}
/**
@@ -764,8 +771,7 @@ static int m41t80_probe(struct i2c_clien
const struct m41t80_chip_info *chip;
struct m41t80_data *clientdata = NULL;
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C
- | I2C_FUNC_SMBUS_BYTE_DATA)) {
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
rc = -ENODEV;
goto exit;
}
next reply other threads:[~2007-09-30 9:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-30 9:54 Mark Zhan [this message]
2007-10-01 15:06 ` [PATCH 2/4] RTC: make m41t80 driver can work with the SMBus adapters Atsushi Nemoto
2007-10-02 13:16 ` [rtc-linux] " Alessandro Zummo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46FF726E.4020200@windriver.com \
--to=rongkai.zhan@windriver.com \
--cc=a.zummo@towertech.it \
--cc=i2c@lm-sensors.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox