[Fwd: Patch spinlock initialisation au1000_eth.c]

[Fwd: Patch spinlock initialisation au1000_eth.c]

[Martin Gebert]

Seems like the spinlock for the AU1x00 ethernet device is initialised too
late, as it is already used in enable_mac(), which is called via
mii_probe() before the init takes place.
The attached patch is working here for a Linux Au1100 2.6.22.6 kernel,
and as far as I checked should also be applicable to the current head
(just line numbers differ).

Signed-off-by: Martin Gebert <Martin.Gebert@alpha-bit.de>

--- drivers/net/au1000_eth.c	2008-06-26 14:21:53.000000000 +0200
+++ drivers/net/au1000_eth.c	2008-06-26 14:23:00.000000000 +0200
@@ -656,6 +656,7 @@
 		dev->name, base, irq);
 
 	aup = dev->priv;
+	spin_lock_init(&aup->lock);
 
 	/* Allocate the data buffers */
 	/* Snooping works fine with eth on all au1xxx */
@@ -766,7 +767,6 @@
 		aup->tx_db_inuse[i] = pDB;
 	}
 
-	spin_lock_init(&aup->lock);
 	dev->base_addr = base;
 	dev->irq = irq;
 	dev->open = au1000_open;