Re: [PATCH 2/6] rb532: use physical addresses for gpio and device controller registers

[Sergei Shtylyov <sshtylyov@ru.mvista.com>]

Florian Fainelli wrote:

> This patch fixes the misuse of virtual address which would lead to
> serious problems while accessing ioremap'd registers in the GPIO
> code.

> Signed-off-by: Florian Fainelli <florian@openwrt.org>
> ---
> diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
> index 00a1c78..3d1632c 100644
> --- a/arch/mips/rb532/gpio.c
> +++ b/arch/mips/rb532/gpio.c
> @@ -47,8 +47,8 @@ struct mpmc_device dev3;
>  static struct resource rb532_gpio_reg0_res[] = {
>  	{
>  		.name 	= "gpio_reg0",
> -		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
> -		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
> +		.start 	= (REG_BASE + GPIOBASE),
> +		.end 	= (REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
>  		.flags 	= IORESOURCE_MEM,
>  	}
>  };
> @@ -56,8 +56,8 @@ static struct resource rb532_gpio_reg0_res[] = {
>  static struct resource rb532_dev3_ctl_res[] = {
>  	{
>  		.name	= "dev3_ctl",
> -		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
> -		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
> +		.start	= (REG_BASE + DEV3BASE),
> +		.end	= (REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
>  		.flags	= IORESOURCE_MEM,
>  	}
>  };

    Oh, and parens are not needed in the initializers anymore...

WBR, Sergei