From: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
To: linux-mips@linux-mips.org
Subject: MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors
Date: Sat, 18 Oct 2008 02:43:34 +0900 [thread overview]
Message-ID: <48F8CEC6.4030605@ruby.dti.ne.jp> (raw)
We already have sufficient infrastructure to support VR5500 and VR5500A
series processors. Here's a Makefile support to make it selectable by
ports, and enable it for NEC EMMA2RH Mark-eins board.
This patch also fixes a confused target help, and adds 1Gb PageMask bits
supported by VR5500 and its variants.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
---
Hi,
For NEC VR5500 processors, it's better to use -march=r5500 than r5000.
Please review.
Thanks,
Shinya
arch/mips/Kconfig | 18 +++++++++++++++---
arch/mips/Makefile | 2 ++
arch/mips/include/asm/mipsregs.h | 1 +
arch/mips/include/asm/module.h | 2 ++
arch/mips/kernel/Makefile | 1 +
arch/mips/lib/Makefile | 1 +
arch/mips/lib/dump_tlb.c | 1 +
arch/mips/mm/Makefile | 1 +
8 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b905744..1efc366 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -249,10 +249,9 @@ config MARKEINS
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_CPU_R5000
+ select SYS_HAS_CPU_R5500
help
- This enables support for the R5432-based NEC Mark-eins
- boards with R5500 CPU.
+ This enables support for the NEC Mark-eins board with VR5500 CPU.
config MACH_VR41XX
bool "NEC VR4100 series based machines"
@@ -1092,6 +1091,16 @@ config CPU_R5432
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
+config CPU_R5500
+ bool "R5500"
+ depends on SYS_HAS_CPU_R5500
+ select CPU_HAS_LLSC
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
+ instruction set.
+
config CPU_R6000
bool "R6000"
depends on EXPERIMENTAL
@@ -1202,6 +1211,9 @@ config SYS_HAS_CPU_R5000
config SYS_HAS_CPU_R5432
bool
+config SYS_HAS_CPU_R5500
+ bool
+
config SYS_HAS_CPU_R6000
bool
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 7f39fd8..c2197c3 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \
-Wa,--trap
+cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
+ -Wa,--trap
cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 9798660..9316324 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -192,6 +192,7 @@
#define PM_16M 0x01ffe000
#define PM_64M 0x07ffe000
#define PM_256M 0x1fffe000
+#define PM_1G 0x7fffe000
#endif
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index de6d09e..e2e09b2 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -98,6 +98,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "R5000 "
#elif defined CONFIG_CPU_R5432
#define MODULE_PROC_FAMILY "R5432 "
+#elif defined CONFIG_CPU_R5500
+#define MODULE_PROC_FAMILY "R5500 "
#elif defined CONFIG_CPU_R6000
#define MODULE_PROC_FAMILY "R6000 "
#elif defined CONFIG_CPU_NEVADA
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d9da711..b1372c2 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_R5500) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 8810dfb..dbcf651 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_CPU_R4300) += dump_tlb.o
obj-$(CONFIG_CPU_R4X00) += dump_tlb.o
obj-$(CONFIG_CPU_R5000) += dump_tlb.o
obj-$(CONFIG_CPU_R5432) += dump_tlb.o
+obj-$(CONFIG_CPU_R5500) += dump_tlb.o
obj-$(CONFIG_CPU_R6000) +=
obj-$(CONFIG_CPU_R8000) +=
obj-$(CONFIG_CPU_RM7000) += dump_tlb.o
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 465ff0e..779821c 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -25,6 +25,7 @@ static inline const char *msk2str(unsigned int mask)
case PM_16M: return "16Mb";
case PM_64M: return "64Mb";
case PM_256M: return "256Mb";
+ case PM_1G: return "1Gb";
#endif
}
return "";
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 44e8dd8..95ba32b 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5000) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5432) += c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R5500) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o tlb-r8k.o
obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o tlb-r4k.o
reply other threads:[~2008-10-17 17:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48F8CEC6.4030605@ruby.dti.ne.jp \
--to=skuribay@ruby.dti.ne.jp \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox