Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
To: linux-mips@linux-mips.org
Cc: shinya.kuribayashi@necel.com
Subject: [PATCH 01/12] MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors
Date: Fri, 24 Oct 2008 01:27:57 +0900	[thread overview]
Message-ID: <4900A60D.5050101@ruby.dti.ne.jp> (raw)
In-Reply-To: <4900A510.3000101@ruby.dti.ne.jp>

We already have sufficient infrastructure to support VR5500 and VR5500A
series processors.  Here's a Makefile support to make it selectable by
ports, and enable it for NEC EMMA2RH Markeins board.

This patch also fixes a confused target help, and adds 1Gb PageMask bits
supported by VR5500 and its variants.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
---
 arch/mips/Kconfig                |   18 +++++++++++++++---
 arch/mips/Makefile               |    2 ++
 arch/mips/include/asm/mipsregs.h |    1 +
 arch/mips/include/asm/module.h   |    2 ++
 arch/mips/kernel/Makefile        |    1 +
 arch/mips/lib/Makefile           |    1 +
 arch/mips/lib/dump_tlb.c         |    1 +
 arch/mips/mm/Makefile            |    1 +
 8 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 5f149b0..e6ad125 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -249,10 +249,9 @@ config MARKEINS
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_CPU_R5000
+	select SYS_HAS_CPU_R5500
 	help
-	  This enables support for the R5432-based NEC Mark-eins
-	  boards with R5500 CPU.
+	  This enables support for the NEC Mark-eins board with VR5500 CPU.
 
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
@@ -1092,6 +1091,16 @@ config CPU_R5432
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
+config CPU_R5500
+	bool "R5500"
+	depends on SYS_HAS_CPU_R5500
+	select CPU_HAS_LLSC
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	help
+	  NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
+	  instruction set.
+
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
@@ -1202,6 +1211,9 @@ config SYS_HAS_CPU_R5000
 config SYS_HAS_CPU_R5432
 	bool
 
+config SYS_HAS_CPU_R5500
+	bool
+
 config SYS_HAS_CPU_R6000
 	bool
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 7f39fd8..c2197c3 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips64r2 -U_
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
 cflags-$(CONFIG_CPU_R5432)	+= $(call cc-option,-march=r5400,-march=r5000) \
 			-Wa,--trap
+cflags-$(CONFIG_CPU_R5500)	+= $(call cc-option,-march=r5500,-march=r5000) \
+			-Wa,--trap
 cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 9798660..9316324 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -192,6 +192,7 @@
 #define PM_16M		0x01ffe000
 #define PM_64M		0x07ffe000
 #define PM_256M		0x1fffe000
+#define PM_1G		0x7fffe000
 
 #endif
 
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index de6d09e..e2e09b2 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -98,6 +98,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "R5000 "
 #elif defined CONFIG_CPU_R5432
 #define MODULE_PROC_FAMILY "R5432 "
+#elif defined CONFIG_CPU_R5500
+#define MODULE_PROC_FAMILY "R5500 "
 #elif defined CONFIG_CPU_R6000
 #define MODULE_PROC_FAMILY "R6000 "
 #elif defined CONFIG_CPU_NEVADA
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d9da711..b1372c2 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_R4X00)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5000)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5432)		+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_R5500)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R8000)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_RM7000)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_RM9000)	+= r4k_fpu.o r4k_switch.o
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 8810dfb..dbcf651 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_CPU_R4300)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R4X00)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R5000)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R5432)		+= dump_tlb.o
+obj-$(CONFIG_CPU_R5500)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R6000)		+=
 obj-$(CONFIG_CPU_R8000)		+=
 obj-$(CONFIG_CPU_RM7000)	+= dump_tlb.o
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 465ff0e..779821c 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -25,6 +25,7 @@ static inline const char *msk2str(unsigned int mask)
 	case PM_16M:	return "16Mb";
 	case PM_64M:	return "64Mb";
 	case PM_256M:	return "256Mb";
+	case PM_1G:	return "1Gb";
 #endif
 	}
 	return "";
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 44e8dd8..95ba32b 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_CPU_R4300)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R4X00)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R5000)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R5432)		+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R5500)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R8000)		+= c-r4k.o cex-gen.o tlb-r8k.o
 obj-$(CONFIG_CPU_RM7000)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_RM9000)	+= c-r4k.o cex-gen.o tlb-r4k.o

  reply	other threads:[~2008-10-23 16:28 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-23 16:23 [PATCH 00/10] Restructure EMMA2RH port Shinya Kuribayashi
2008-10-23 16:27 ` Shinya Kuribayashi [this message]
2008-10-23 16:29 ` [PATCH 03/12] MIPS: Move arch/mips/emma2rh/ into arch/mips/emma/ Shinya Kuribayashi
2008-10-23 16:30 ` [PATCH 04/12] MIPS: Move <asm/emma2rh> to <asm/emma> dir Shinya Kuribayashi
2008-10-27 15:07   ` [PATCH] MIPS: EMMA2RH: Fix incorrect header references Shinya Kuribayashi
2008-10-27 15:36     ` Ralf Baechle
2008-10-23 16:30 ` [PATCH 05/12] MIPS: Remove emma2rh_sync on read operation Shinya Kuribayashi
2008-10-23 16:31 ` [PATCH 06/12] MIPS: EMMA2RH: Remove emma2rh_irq_base global variable Shinya Kuribayashi
2008-10-23 16:31 ` [PATCH 07/12] MIPS: EMMA2RH: Remove emma2rh_sw_irq_base Shinya Kuribayashi
2008-10-23 16:32 ` [PATCH 08/12] MIPS: EMMA2RH: Remove emma2rh_gpio_irq_base Shinya Kuribayashi
2008-10-23 17:20   ` Markus Gothe
2008-10-23 16:32 ` [PATCH 09/12] MIPS: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.c Shinya Kuribayashi
2008-10-23 16:33 ` [PATCH 10/12] MIPS: Markeins: Remove runtime debug prints Shinya Kuribayashi
2008-10-23 16:35 ` [PATCH 11/12] MIPS: Markeins: Extract ll_emma2rh_* functions Shinya Kuribayashi
2008-10-23 16:36 ` [PATCH 12/12] MIPS: Markeins: Remove unnecessary define and cleanup comments, etc Shinya Kuribayashi
2008-10-23 21:00 ` [PATCH 02/12] MIPS: EMMA Kconfig reorganization Shinya Kuribayashi
2008-10-27 10:47 ` [PATCH 00/10] Restructure EMMA2RH port Ralf Baechle
2008-10-27 11:05   ` Shinya Kuribayashi
2008-10-27 14:50     ` Ralf Baechle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4900A60D.5050101@ruby.dti.ne.jp \
    --to=skuribay@ruby.dti.ne.jp \
    --cc=linux-mips@linux-mips.org \
    --cc=shinya.kuribayashi@necel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox