From: "Kevin D. Kissell" <kevink@paralogos.com>
To: "Gandham, Raghu" <raghu@mips.com>
Cc: linux-mips@linux-mips.org, "Dearman, Chris" <chris@mips.com>
Subject: Re: [PATCH 15/15] Do not rely on the initial state of TC/VPE bindings when doing cross VPE writes
Date: Thu, 02 Jul 2009 15:08:50 -0700 [thread overview]
Message-ID: <4A4D2FF2.8080408@paralogos.com> (raw)
In-Reply-To: <94BD67F8AF3ED34FA362C662BA1F12C503BED88E@MTVEXCHANGE.mips.com>
[-- Attachment #1: Type: text/plain, Size: 2120 bytes --]
Gandham, Raghu wrote:
>
>> -----Original Message-----
>> From: Kevin D. Kissell [mailto:kevink@paralogos.com]
>> Sent: Wednesday, July 01, 2009 9:02 PM
>> To: Gandham, Raghu
>> Cc: linux-mips@linux-mips.org; Dearman, Chris
>> Subject: Re: [PATCH 15/15] Do not rely on the initial state of TC/VPE
>> bindings when doing cross VPE writes
>>
>> Note that, regardless of the reset state, smtc_configure_tlb() should
>> have at least temporarily bound TC 1 to VPE1, which may be why this
>> never seemed to be a problem on the 34K. If one wants to support
>> designs with more than 2 VPEs, then this is probably one of the things
>> that needs to be fixed. That having been said, rather than adding a
>> usually-redundant write_vpe_c0_vpeconf0() in that clause, wouldn't it
>>
> be
>
>> cleaner to just move the MVP setting from the top of the loop to the
>> point in the loop just after the TCs have been bound to the VPE in
>> question, i.e.,
>>
>> 454 if (slop) {
>> 455 if (tc != 0) {
>> 456 smtc_tc_setup(vpe,tc, cpu);
>> 457 cpu++;
>> 458 }
>> 459 printk(" %d", tc);
>> 460 tc++;
>> 461 slop--;
>> 462 }
>>
>> write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
>> VPECONF0_MVP);
>>
>> 463 if (vpe != 0) {
>> 464 /*
>> 465 * Clear any stale software interrupts
>>
> from
>
>> VPE's Cause
>> 466 */
>>
>> This should definitely be OK for a 34K, because it's being executed by
>> TC0 in VPE0 and the reset state of VPE0 has MVP set. If it weren't,
>> smtc_configure_tlb() would have failed.
>>
>> Regards,
>>
>> Kevin K.
>>
>
>
> I will resend this patch with your suggestion.
>
> Thanks,
> Raghu
>
Just make sure it works, first! ;o) I'm thousands of miles away from
my build/test systems.
Regards,
Kevn K.
[-- Attachment #2: Type: text/html, Size: 2850 bytes --]
next prev parent reply other threads:[~2009-07-02 22:14 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-02 2:39 [PATCH 00/15] Port changes from linux-mti Raghu Gandham
2009-07-02 2:39 ` [PATCH 01/15] Due to some broken bitfiles, we can't trust IntCtl Raghu Gandham
2009-07-02 2:40 ` [PATCH 02/15] Fix absd emulation Raghu Gandham
2009-07-02 2:40 ` [PATCH 03/15] [MTI] Clean up SPRAM support a little Raghu Gandham
2009-07-02 2:40 ` [PATCH 04/15] Fix accesses to device registers on MIPS boards Raghu Gandham
2009-07-02 2:40 ` [PATCH 05/15] [MTI] MIPS secondary cache supports 64 byte line size Raghu Gandham
2009-07-02 2:41 ` [PATCH 06/15] [MTI] Enable PIIX4 PCI2.1 compliancy on Malta Raghu Gandham
2009-07-02 2:41 ` [PATCH 07/15] APRP Patch04: Propagate final value of max_low_pfn to max_pfn Raghu Gandham
2009-07-02 2:41 ` [PATCH 08/15] Fix compiler warning in vpe.c Raghu Gandham
2009-07-02 2:41 ` [PATCH 09/15] Add debug prints during CPU intialization Raghu Gandham
2009-07-02 2:42 ` [PATCH 10/15] Port of GIC related changes from MTI branch Raghu Gandham
2009-07-02 2:42 ` [PATCH 11/15] Add missing memory barriers for correct operation of amon_cpu_start Raghu Gandham
2009-07-02 2:42 ` [PATCH 12/15] Added coherentio command line option for DMA_NONCOHERENT kernel Raghu Gandham
2009-07-02 2:43 ` [PATCH 13/15] Avoid accessing GCMP registers when they are not present Raghu Gandham
2009-07-02 2:43 ` [PATCH 14/15] Avoid queing multiple reschedule IPI's in SMTC Raghu Gandham
2009-07-02 2:43 ` [PATCH 15/15] Do not rely on the initial state of TC/VPE bindings when doing cross VPE writes Raghu Gandham
2009-07-02 4:02 ` Kevin D. Kissell
2009-07-02 21:46 ` Gandham, Raghu
2009-07-02 21:46 ` Gandham, Raghu
2009-07-02 22:08 ` Kevin D. Kissell [this message]
2009-10-12 16:17 ` Ralf Baechle
2009-10-12 20:20 ` [PATCH 15/15] Do not rely on the initial state of TC/VPEbindings " Gandham, Raghu
2009-10-12 20:20 ` Gandham, Raghu
2009-10-12 20:25 ` Ralf Baechle
2009-07-10 8:47 ` [PATCH 00/15] Port changes from linux-mti Gandham, Raghu
2009-07-10 8:47 ` Gandham, Raghu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A4D2FF2.8080408@paralogos.com \
--to=kevink@paralogos.com \
--cc=chris@mips.com \
--cc=linux-mips@linux-mips.org \
--cc=raghu@mips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).