Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: "Kevin D. Kissell" <kevink@paralogos.com>
To: STUART VENTERS <stuart.venters@adtran.com>
Cc: "Anoop P.A." <Anoop_P.A@pmc-sierra.com>,
	linux-mips@linux-mips.org, Anoop P A <anoop.pa@gmail.com>
Subject: Re: SMTC support status in latest git head.
Date: Fri, 24 Dec 2010 04:32:32 -0800	[thread overview]
Message-ID: <4D1492E0.5090407@paralogos.com> (raw)
In-Reply-To: <8F242B230AD6474C8E7815DE0B4982D7179FB88D@EXV1.corp.adtran.com>

Thank you, Stuart!  I've spotted some definite breakage to SMTC between 
those versions.  In arch/mips/include/asm/stackframe.h, someone moved 
the store of the Status register value in SAVE_SOME (line 169 or 204, 
depending on the version) from two instructions after the mfc0 to a 
point after the #ifdef for SMTC, presumably to get better pipelining of 
the register access.  Unfortunately, the v1 register is also used in the 
SMTC-specific fragment to save TCStatus, so the Status value gets 
clobbered before it gets stored.  This will eventually result in the 
Status register getting a TCStatus value, which has some bits on common, 
but isn't identical and sooner or later Bad Things will happen.

I'm a little surprised this wasn't caught by visual inspection of the patch.

Possible solutions would include reverting the store of the CP0_STATUS 
value to the block above the #ifdef, or, to retain whatever performance 
advantage was obtained by moving the store downward, to use v0/$2 
instead of v1/$3, as the staging register for the TCStatus value.  I'd 
lean toward the second option, but I'm not in a position to test and 
submit a patch just now.

             Regards,

             Kevin K.

On 12/23/10 1:09 PM, STUART VENTERS wrote:
> Kevin,
>
> I'm not sure if it's useful,
>     but finally I got the time to look at the two kernel versions Anoop pointed out.
>      works   2.6.32-stable with patch 804
>      works_not 2.6.33-stable
>
> greping for files with CONFIG_MIPS_MT_SMTC
>     and looking for timer interrupt related stuff found the following differences:
>
>
> arch/mips/include/asm/irq.h
> arch/mips/kernel/irq.c
>    do_IRQ
>
> arch/mips/include/asm/stackframe.h
>    SAVE_SOME SAVE_TEMP get/set_saved_sp
>
> arch/mips/include/asm/time.h
>    clocksource_set_clock
>
> arch/mips/kernel/process.c
>    cpu_idle
>
> arch/mips/kernel/smtc.c
>    __irq_entry
>    ipi_decode
>        SMTC_CLOCK_TICK
>
>
> Enclosed are the two subsets of files for a more expert look.
>
> I'll try to look in more detail after Christmas.
>
>
> Cheers,
>
> Stuart
>
>
>
>

  parent reply	other threads:[~2010-12-24 12:32 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-16 15:37 SMTC support status in latest git head STUART VENTERS
2010-12-16 15:37 ` STUART VENTERS
     [not found] ` <4D0A677C.6040104@paralogos.com>
2010-12-16 19:58   ` Kevin D. Kissell
2010-12-17 21:35     ` Kevin D. Kissell
2010-12-20 10:44       ` Anoop P A
     [not found]         ` <4D10F7A9.1020306@paralogos.com>
2010-12-21 20:06           ` Anoop P.A.
2010-12-21 20:06             ` Anoop P.A.
2010-12-21 20:29             ` Anoop P.A.
2010-12-21 20:29               ` Anoop P.A.
2010-12-22 10:27               ` Kevin D. Kissell
2010-12-22 11:35                 ` Anoop P A
2010-12-22 11:37                   ` Kevin D. Kissell
2010-12-22 11:51                     ` Anoop P A
2010-12-22 13:03                       ` Kevin D. Kissell
2010-12-22 16:34                         ` STUART VENTERS
2010-12-22 16:34                           ` STUART VENTERS
2010-12-23 21:09                         ` STUART VENTERS
2010-12-23 21:09                           ` STUART VENTERS
2010-12-24 12:32                           ` Kevin D. Kissell [this message]
2010-12-24 14:39                             ` Anoop P A
2010-12-24 14:53                               ` Kevin D. Kissell
2010-12-24 16:02                                 ` Anoop P A
2010-12-24 23:34                                   ` Kevin D. Kissell
2010-12-25  7:32                                     ` Anoop P A
2010-12-25 15:17                                       ` Kevin D. Kissell
2010-12-27 15:49                                     ` STUART VENTERS
2010-12-27 15:49                                       ` STUART VENTERS
2010-12-27 17:19                                       ` Anoop P A
2010-12-28  8:19                                         ` Anoop P A
2010-12-28  8:43                                           ` Kevin D. Kissell
2010-12-31 12:27                                             ` Anoop P A
2011-01-01  8:42                                               ` Kevin D. Kissell
2011-01-03 15:12                                                 ` Anoop P A
2011-01-03 16:14                                                   ` Kevin D. Kissell
2011-01-03 19:20                                                     ` Anoop P A
2011-01-04  8:17                                                       ` Kevin D. Kissell
2011-01-04 13:02                                                         ` Anoop P A
2011-01-04 14:37                                                           ` Anoop P A
2011-01-04 17:21                                                             ` Kevin D. Kissell
2011-01-04 17:54                                                               ` Anoop P A
2011-01-04 18:33                                                                 ` Kevin D. Kissell
2011-01-05 13:11                                                                   ` Anoop P A
2011-01-05 19:23                                                                     ` Kevin D. Kissell
2011-01-06 20:23                                                                       ` Anoop P A
2011-01-06 23:31                                                                         ` Kevin D. Kissell
2011-01-07  7:56                                                                           ` Anoop P A
2011-01-07 18:46                                                                             ` Kevin D. Kissell
2011-01-08 19:33                                                                               ` Anoop P A
2011-01-10 19:30                                                                             ` Kevin D. Kissell
2011-01-11  4:05                                                                               ` Anoop P A
2011-01-13  7:53                                                                               ` Kevin D. Kissell
2011-01-04 17:40                                                           ` Kevin D. Kissell
2011-01-05 13:09                                                             ` Anoop P A
  -- strict thread matches above, loose matches on Subject: below --
2010-12-14 21:27 STUART VENTERS
2010-12-14 21:27 ` STUART VENTERS
2010-12-14 23:01 ` Kevin D. Kissell
2010-12-08 13:48 Anoop P.A.
2010-12-08 13:48 ` Anoop P.A.
2010-12-09 17:07 ` Ralf Baechle
2010-12-09 18:52 ` Kevin D. Kissell
2010-12-14 15:25   ` Anoop P.A.
2010-12-14 15:25     ` Anoop P.A.
2010-12-14 18:32     ` Kevin D. Kissell
2010-12-14 18:50       ` Ralf Baechle
2010-12-15 19:18       ` Anoop P A
2010-12-15 19:58         ` Kevin D. Kissell
2010-12-16 13:03           ` Anoop P A
2010-12-16 18:43             ` Kevin D. Kissell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D1492E0.5090407@paralogos.com \
    --to=kevink@paralogos.com \
    --cc=Anoop_P.A@pmc-sierra.com \
    --cc=anoop.pa@gmail.com \
    --cc=linux-mips@linux-mips.org \
    --cc=stuart.venters@adtran.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox