From: Wladislav Wiebe <wladislav.kw@gmail.com>
To: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org, ralf@linux-mips.org,
David Daney <david.daney@cavium.com>,
Maxim Uvarov <muvarov@gmail.com>
Subject: Re: [PATCH] MIPS: OCTEON: Improve _machine_halt implementation.
Date: Wed, 29 May 2013 08:09:01 +0200 [thread overview]
Message-ID: <51A59B7D.2040506@gmail.com> (raw)
In-Reply-To: <1369416182-7345-1-git-send-email-ddaney.cavm@gmail.com>
Hi,
On 24/05/13 19:23, David Daney wrote:
> From: David Daney <david.daney@cavium.com>
>
> As noted by Wladislav Wiebe:
> $ halt
> ..
> Sent SIGKILL to all processes
> Requesting system halt
> [66.729373] System halted.
> [66.733244]
> [66.734761] =====================================
> [66.739473] [ BUG: lock held at task exit time! ]
> [66.744188] 3.8.7-0-sampleversion-fct #49 Tainted: G O
> [66.750202] -------------------------------------
> [66.754913] init/21479 is exiting with locks still held!
> [66.760234] 1 lock held by init/21479:
> [66.763990] #0: (reboot_mutex){+.+...}, at: [<ffffffff801776c8>] SyS_reboot+0xe0/0x218
> [66.772165]
> [66.772165] stack backtrace:
> [66.776532] Call Trace:
> [66.778992] [<ffffffff805780a8>] dump_stack+0x8/0x34
> [66.783972] [<ffffffff801618b0>] do_exit+0x610/0xa70
> [66.788948] [<ffffffff801777a8>] SyS_reboot+0x1c0/0x218
> [66.794186] [<ffffffff8013d6a4>] handle_sys64+0x44/0x64
>
> This is an alternative fix to the one sent by Wladislav. We kill the
> watchdog for each CPU and then spin in WAIT with interrupts disabled.
> This is the lowest power mode for the OCTEON. If we were to spin with
> interrupts enabled, we would get a continual stream of warning messages
> and backtraces from the lockup detector, so I chose to disable
> interrupts.
>
good alternative!
Thanks.
--
Wladislav Wiebe
> Signed-off-by: David Daney <david.daney@cavium.com>
> Cc: Maxim Uvarov <muvarov@gmail.com>
> Cc: Wladislav Wiebe <wladislav.kw@gmail.com>
> ---
> arch/mips/cavium-octeon/setup.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
> index b0baa29..01b1b3f 100644
> --- a/arch/mips/cavium-octeon/setup.c
> +++ b/arch/mips/cavium-octeon/setup.c
> @@ -428,13 +428,16 @@ static void octeon_restart(char *command)
> */
> static void octeon_kill_core(void *arg)
> {
> - mb();
> - if (octeon_is_simulation()) {
> - /* The simulator needs the watchdog to stop for dead cores */
> - cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
> + if (octeon_is_simulation())
> /* A break instruction causes the simulator stop a core */
> - asm volatile ("sync\nbreak");
> - }
> + asm volatile ("break" ::: "memory");
> +
> + local_irq_disable();
> + /* Disable watchdog on this core. */
> + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
> + /* Spin in a low power mode. */
> + while (true)
> + asm volatile ("wait" ::: "memory");
> }
>
>
>
prev parent reply other threads:[~2013-05-29 6:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-24 17:23 [PATCH] MIPS: OCTEON: Improve _machine_halt implementation David Daney
2013-05-29 6:09 ` Wladislav Wiebe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51A59B7D.2040506@gmail.com \
--to=wladislav.kw@gmail.com \
--cc=david.daney@cavium.com \
--cc=ddaney.cavm@gmail.com \
--cc=linux-mips@linux-mips.org \
--cc=muvarov@gmail.com \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox