From: Florian Fainelli <f.fainelli@gmail.com>
To: Kamal Dasu <kdasu.kdev@gmail.com>,
linux-mips@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paulburton@kernel.org>,
James Hogan <jhogan@kernel.org>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
Huacai Chen <chenhc@lemote.com>,
Mike Rapoport <rppt@linux.ibm.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] MIPS: c-r4k: Invalidate BMIPS5000 ZSCM prefetch lines
Date: Wed, 11 Mar 2020 13:54:23 -0700 [thread overview]
Message-ID: <53c0ca2d-84a5-7556-c1f4-a75e99f0a743@gmail.com> (raw)
In-Reply-To: <20200207223324.46011-1-kdasu.kdev@gmail.com>
On 2/7/20 2:33 PM, Kamal Dasu wrote:
> Zephyr secondary cache is 256KB, 128B lines. 32B sectors. A secondary cache
> line can contain two instruction cache lines (64B), or four data cache
> lines (32B). Hardware prefetch Cache detects stream access, and prefetches
> ahead of processor access. Add support to invalidate BMIPS5000 cpu zephyr
> secondary cache module (ZSCM) on DMA from device so that data returned is
> coherent during DMA read operations.
>
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Thomas can review and apply this patch? Thank you!
> ---
> arch/mips/mm/c-r4k.c | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
> index 5f3d0103b95d..acd9ef383e97 100644
> --- a/arch/mips/mm/c-r4k.c
> +++ b/arch/mips/mm/c-r4k.c
> @@ -901,6 +901,31 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
> __sync();
> }
>
> +static void prefetch_cache_inv(unsigned long addr, unsigned long size)
> +{
> + unsigned int linesz = cpu_scache_line_size();
> + unsigned long addr0 = addr, addr1;
> +
> + addr0 &= ~(linesz - 1);
> + addr1 = (addr0 + size - 1) & ~(linesz - 1);
> +
> + protected_writeback_scache_line(addr0);
> + if (likely(addr1 != addr0))
> + protected_writeback_scache_line(addr1);
> + else
> + return;
> +
> + addr0 += linesz;
> + if (likely(addr1 != addr0))
> + protected_writeback_scache_line(addr0);
> + else
> + return;
> +
> + addr1 -= linesz;
> + if (likely(addr1 > addr0))
> + protected_writeback_scache_line(addr0);
> +}
> +
> static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
> {
> /* Catch bad driver code */
> @@ -908,6 +933,10 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
> return;
>
> preempt_disable();
> +
> + if (current_cpu_type() == CPU_BMIPS5000)
> + prefetch_cache_inv(addr, size);
> +
> if (cpu_has_inclusive_pcaches) {
> if (size >= scache_size) {
> if (current_cpu_type() != CPU_LOONGSON64)
>
--
Florian
next prev parent reply other threads:[~2020-03-11 20:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-07 22:33 [PATCH v2] MIPS: c-r4k: Invalidate BMIPS5000 ZSCM prefetch lines Kamal Dasu
2020-02-07 22:35 ` Florian Fainelli
2020-03-11 20:54 ` Florian Fainelli [this message]
2020-03-11 21:44 ` Thomas Bogendoerfer
2020-03-13 3:09 ` Kamal Dasu
2020-03-16 15:31 ` Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53c0ca2d-84a5-7556-c1f4-a75e99f0a743@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=chenhc@lemote.com \
--cc=jhogan@kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=kdasu.kdev@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=paulburton@kernel.org \
--cc=ralf@linux-mips.org \
--cc=rppt@linux.ibm.com \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox