Re: Linux for MIPS Atlas 4Kc board

["Michael Anburaj" <michaelanburaj@hotmail.com>]

Hi,

Thanks a lot Muthu & all others who helped me.

I used the defconfig-atlas to configure my linux build & it works great on 
my board! <Probably I did not read the docs well, sorry> Thanks again, but I 
still have one more hurdle to jump over to kick start this excercise with 
linux.

Messages on my console (I used 'go' on YAMON prompt to start linux):
-------------------------------------------------------------------

Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00


Please advise me the simplest form of starting linux from YAMON prompt after 
downloading the image(srec) on to RAM.
Also please point me to a doc. that talks about the possible parameters when 
starting Linux.

Thanks everyone & Cheers,
-Mike.



>From: Muthukumar Ratty <muthu@iqmail.net>
>To: Michael Anburaj <michaelanburaj@hotmail.com>
>Subject: Re: Linux for MIPS Atlas 4Kc board
>Date: Sun, 4 May 2003 22:49:40 -0700 (PDT)
>
>On Sun, 4 May 2003, Michael Anburaj wrote:
>
> > Hi Muthu,
> >
> > So, I guess then I would have to do,
> >
> > make menuconfig & choose little endian after "cp arch/mips/default-atlas
> > .config".
>
>small typo, its defconfig-atlas :)
>
>Yes, if you want to run little-endian. But I would suggest you try the big
>endian first (since I guess you have tools for that already).
>
>
> >Am I right? If so, Do I need mipsel-linux??? Because, as I
>
>If you decide to go with little-endian then you need mipsel-linux-*. You
>can either get it from linux-mips or build your own.
>
> > understand mips-linux tool-chain if for big endian.
> >
> > Did you run the final image on top of YAMON?
> >
>
>Yes. I used YAMON to net load the image. But I guess it doesnt matter
>(redboot/yamon/any). Actually I tried RedBoot before for linux-2.4.3 and
>it worked like a champ.
>
>Muthu
>
>
> > Please help me out & thanks,
> > -Mike.
> >
> >
> >
> >
> >
> >
> > >From: Muthukumar Ratty <muthu@iqmail.net>
> > >To: Michael Anburaj <michaelanburaj@hotmail.com>
> > >CC: <linux-mips@linux-mips.org>
> > >Subject: Re: Linux for MIPS Atlas 4Kc board
> > >Date: Sun, 4 May 2003 19:21:49 -0700 (PDT)
> > >
> > >
> > >Hi Mike,
> > >
> > >I dont know what version you are trying but the one at linux_2_4 branch
> > >(linux2.4.21-pre4) seems to work. You can get it with
> > >
> > >cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs co -r linux_2_4 linux
> > >
> > >to configure, you can use the default config. from head do ..
> > >
> > >cp arch/mips/default-atlas .config
> > >
> > >I tried little endian. If you want that you need to select it in the
> > >config.
> > >
> > >Muthu
> > >
> > >
> > >On Sun, 4 May 2003, Michael Anburaj wrote:
> > >
> > > > Hi,
> > > >
> > > > Finally, I could compile vmlinux. I thought of booting this RAM 
>image
> > >(or
> > > > its SREC equivalent) using the onboard YAMON (in BIG endian mode - I 
>am
> > > > having trouble building Redboot in BIG endian mode <issue ported at 
>ecos
> > > > forum>, so for now thought of using YAMON). After downloding the
> > > > vmlinux.srec over the serial port (Starting at 0x80100000), I issued 
>the
> > >go
> > > > command to run the image. I get the following message:
> > > >
> > > > YAMON> go
> > > >
> > > > LINUX started...
> > > >
> > > > * Exception (user) : Reserved instruction *
> > > > BadVAddr = 0x00000000  Cause    = 0x00808028
> > > > Compare  = 0x00061a80  Config   = 0x80038083
> > > > Config1  = 0x1e9b4d8a  Context  = 0x63800000
> > > > Count    = 0xb9188fd8  DEPC     = 0x21424255
> > > > Debug    = 0x0400dc0b  EPC      = 0x80122258
> > > > EntryHi  = 0x00000068  EntryLo0 = 0x028ff72e
> > > > EntryLo1 = 0x035a241f  ErrorEPC = 0x8003add0
> > > > Index    = 0x0000000b  PRId     = 0x00018001
> > > > PageMask = 0x01b90000  Random   = 0x0000000d
> > > > Status   = 0x00000402  WatchHi  = 0x00000000
> > > > WatchLo  = 0x00000000  Wired    = 0x00000000
> > > > Hi       = 0x00000000  Lo       = 0x04000000
> > > >
> > > > $ 0(zr):0x00000000  $ 8(t0):0x00000000  $16(s0):0x802d810a
> > > > $24(t8):0xffffffff
> > > > $ 1(at):0x80280000  $ 9(t1):0x00000000  $17(s1):0x802d810c
> > > > $25(t9):0x802c1e94
> > > > $ 2(v0):0x0000000a  $10(t2):0x8024f401  $18(s2):0x00000400
> > > > $26(k0):0x00000000
> > > > $ 3(v1):0x00000000  $11(t3):0x00000000  $19(s3):0x00000001
> > > > $27(k1):0x00000000
> > > > $ 4(a0):0x00000000  $12(t4):0x00000000  $20(s4):0x0000001a
> > > > $28(gp):0x802c0000
> > > > $ 5(a1):0x80280000  $13(t5):0x00000000  $21(s5):0x0000000a
> > > > $29(sp):0x802c1f58
> > > > $ 6(a2):0x8024385a  $14(t6):0x802d8109  $22(s6):0x0000003e
> > > > $30(s8):0x800b1080
> > > > $ 7(a3):0x00000000  $15(t7):0xfffffffe  $23(s7):0x0000003c
> > > > $31(ra):0x80122230
> > > >
> > > >
> > > > The linux image started fine, but caused an exception after a while. 
>Is
> > >this
> > > > because Linux is not compatible with YAMON? If so, what are the 
>possible
> > > > monitor programs that can go with Linux? Please point me to the
> > >documents in
> > > > this regard (documents on running Linux executable on Atlas 4Kc 
>board).
> > > >
> > > > Or will Linux work with any ROM monitor? If so, please let me know 
>the
> > > > reason for the exception.
> > > >
> > > > Thanks a lot,
> > > > -Mike.
> > > >
> > > > _________________________________________________________________
> > > > STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> > > > http://join.msn.com/?page=features/junkmail
> > > >
> > > >
> > >
> >
> >
> > _________________________________________________________________
> > Help STOP SPAM with the new MSN 8 and get 2 months FREE*
> > http://join.msn.com/?page=features/junkmail
> >
>


_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail