From: sjhill@realitydiluted.com
To: moreau francis <francis_moreau2000@yahoo.fr>
Cc: linux-mips@linux-mips.org
Subject: Re: Kernel located in KSEG2 or KSEG3.
Date: Mon, 13 Dec 2004 13:04:27 -0600 (CST) [thread overview]
Message-ID: <E1CdvUh-0002B1-MR@real.realitydiluted.com> (raw)
In-Reply-To: <20041213181252.23074.qmail@web25104.mail.ukl.yahoo.com>
> Here is my board's mapping:
>
> Physical Memory Map:
>
> start size type
> -----------------------------
> 0x20000000 - 8MB - SDRAM
> 0x30000000 - 16MB - FLASH
> 0x40000000 - 16MB - FLASH
> 0x50000000 - 2MB - SRAM
>
Your board manufacturer should be shot and then have
their hands and tongue cut off. All kidding aside,
are you sure there is no device mapped in the physical
address range of 0x1fc00000-0x1fffffff? I highly doubt
your board would boot otherwise, since a MIPS processor
coming out of reset jumps to physical address 0x1fc00000.
Can you check the board's manual? Thanks.
-Steve
next prev parent reply other threads:[~2004-12-13 19:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-13 18:12 Kernel located in KSEG2 or KSEG3 moreau francis
2004-12-13 19:04 ` sjhill [this message]
2004-12-14 10:03 ` moreau francis
2004-12-15 13:38 ` Ralf Baechle
2004-12-16 15:05 ` moreau francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1CdvUh-0002B1-MR@real.realitydiluted.com \
--to=sjhill@realitydiluted.com \
--cc=francis_moreau2000@yahoo.fr \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox