From: Ladislav Michl <oss-lists@triops.cz>
To: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: linux-usb@vger.kernel.org, linux-mips@vger.kernel.org
Subject: [PATCH 08/11] usb: dwc3: Move Octeon glue code from arch/mips
Date: Mon, 19 Jun 2023 22:14:36 +0200 [thread overview]
Message-ID: <ZJC3LLpUlatnLdnv@lenoch> (raw)
In-Reply-To: <ZJC165p0Mj4jHcBh@lenoch>
From: Ladislav Michl <ladis@linux-mips.org>
Octeon DWC3 glue code now compiles on all platforms, so move
it to drivers/usb/dwc3. No functional changes.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
arch/mips/cavium-octeon/Makefile | 1 -
drivers/usb/dwc3/Kconfig | 9 +++++++++
drivers/usb/dwc3/Makefile | 1 +
.../octeon-usb.c => drivers/usb/dwc3/dwc3-octeon.c | 0
4 files changed, 10 insertions(+), 1 deletion(-)
rename arch/mips/cavium-octeon/octeon-usb.c => drivers/usb/dwc3/dwc3-octeon.c (100%)
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c02e542959a..2a5926578841 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -18,4 +18,3 @@ obj-y += crypto/
obj-$(CONFIG_MTD) += flash_setup.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_OCTEON_ILM) += oct_ilm.o
-obj-$(CONFIG_USB) += octeon-usb.o
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index be954a9abbe0..8fc7b7ff7f16 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -168,4 +168,13 @@ config USB_DWC3_AM62
The Designware Core USB3 IP is programmed to operate in
in USB 2.0 mode only.
Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_OCTEON
+ tristate "Cavium Octeon Platforms"
+ depends on CAVIUM_OCTEON_SOC || COMPILE_TEST
+ default USB_DWC3
+ help
+ Support Cavium Octeon platforms with DesignWare Core USB3 IP.
+ Say 'Y' or 'M' here if you have one such device.
+
endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 9f66bd82b639..fe1493d4bbe5 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
obj-$(CONFIG_USB_DWC3_IMX8MP) += dwc3-imx8mp.o
obj-$(CONFIG_USB_DWC3_XILINX) += dwc3-xilinx.o
+obj-$(CONFIG_USB_DWC3_OCTEON) += dwc3-octeon.o
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/drivers/usb/dwc3/dwc3-octeon.c
similarity index 100%
rename from arch/mips/cavium-octeon/octeon-usb.c
rename to drivers/usb/dwc3/dwc3-octeon.c
--
2.39.2
next prev parent reply other threads:[~2023-06-19 20:14 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-19 20:09 [PATCH 00/11] Cleanup Octeon DWC3 glue code Ladislav Michl
2023-06-19 20:11 ` [PATCH 01/11] MIPS: OCTEON: octeon-usb: add all register offsets Ladislav Michl
2023-06-19 20:11 ` [PATCH 02/11] MIPS: OCTEON: octeon-usb: use bitfields for control register Ladislav Michl
2023-06-19 20:12 ` [PATCH 03/11] MIPS: OCTEON: octeon-usb: use bitfields for host config register Ladislav Michl
2023-06-19 20:12 ` [PATCH 04/11] MIPS: OCTEON: octeon-usb: use bitfields for shim register Ladislav Michl
2023-06-19 20:13 ` [PATCH 05/11] MIPS: OCTEON: octeon-usb: move gpio config to separate function Ladislav Michl
2023-06-19 20:13 ` [PATCH 06/11] MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q Ladislav Michl
2023-06-19 20:14 ` [PATCH 07/11] MIPS: OCTEON: octeon-usb: cleanup divider calculation Ladislav Michl
2023-06-19 20:14 ` Ladislav Michl [this message]
2023-06-23 13:15 ` [PATCH 08/11] usb: dwc3: Move Octeon glue code from arch/mips Thomas Bogendoerfer
2023-06-30 22:32 ` Thinh Nguyen
2023-06-19 20:15 ` [PATCH 09/11] usb: dwc3: dwc3-octeon: Convert to glue driver Ladislav Michl
2023-06-30 23:25 ` Thinh Nguyen
2023-06-19 20:15 ` [PATCH 10/11] usb: dwc3: dwc3-octeon: Move node parsing into driver probe Ladislav Michl
2023-06-30 23:27 ` Thinh Nguyen
2023-07-02 0:13 ` Ladislav Michl
2023-07-05 22:55 ` Thinh Nguyen
2023-07-01 5:49 ` kernel test robot
2023-06-19 20:16 ` [PATCH 11/11] usb: dwc3: Add SPDX header and copyright Ladislav Michl
2023-06-22 23:01 ` [PATCH 00/11] Cleanup Octeon DWC3 glue code Thinh Nguyen
2023-06-23 7:57 ` Ladislav Michl
2023-06-23 13:14 ` Thomas Bogendoerfer
2023-06-23 23:24 ` Thinh Nguyen
2023-06-24 13:04 ` Ladislav Michl
2023-06-26 23:17 ` Thinh Nguyen
2023-06-30 10:40 ` Ladislav Michl
2023-06-30 21:45 ` Thinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZJC3LLpUlatnLdnv@lenoch \
--to=oss-lists@triops.cz \
--cc=Thinh.Nguyen@synopsys.com \
--cc=linux-mips@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).