* [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT
@ 2025-07-16 11:25 Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 1/9] dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B Keguang Zhang via B4 Relay
` (9 more replies)
0 siblings, 10 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel, Krzysztof Kozlowski,
Philippe Mathieu-Daudé
Convert all platform devices to Device Tree.
Remove all obsolete platform device code.
Switch to the generic MIPS core.
Add built-in DTB support.
Update Kconfig and Makefile accordingly.
Update and rename the defconfig.
Changes in v3:
- Squash two previous changes that documented DT bindings for the
LS1B-DEMO and CQ-T300B into a single patch.
- Separate the built-in DTB support into a single patch.
- Move the timer node under the APB bus.
- Remove redundant console bootargs since it is covered by stdout-path.
- Replace mtdparts bootargs with a "partitions" node.
- Link to v2: https://lore.kernel.org/r/20250709-loongson1-arch-v2-0-bcff6e518c09@gmail.com
Changes in v2:
- Document two new boards: loongson,ls1b-demo and loongson,cq-t300b.
- Submit complete DTS files for each board.
- Switch to the generic MIPS kernel.
- Consolidate Loongson1 defconfigs.
- Link to v1: https://lore.kernel.org/all/20230729134318.1694467-1-keguang.zhang@gmail.com/
---
Keguang Zhang (9):
dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B
MIPS: dts: loongson: Add LS1B-DEMO board
MIPS: dts: loongson: Add LSGZ_1B_DEV board
MIPS: dts: loongson: Add Smartloong-1C board
MIPS: dts: loongson: Add CQ-T300B board
MIPS: loongson: Add built-in DTB support
MIPS: loongson32: Switch to generic core
MIPS: Unify Loongson1 PRID_REV
MIPS: configs: Consolidate Loongson1 defconfigs
.../devicetree/bindings/mips/loongson/devices.yaml | 2 +
MAINTAINERS | 3 +-
arch/mips/Kconfig | 64 ++---
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/loongson/Makefile | 10 +
arch/mips/boot/dts/loongson/cq-t300b.dts | 110 ++++++++
arch/mips/boot/dts/loongson/loongson1.dtsi | 136 ++++++++++
arch/mips/boot/dts/loongson/loongson1b.dtsi | 198 ++++++++++++++
arch/mips/boot/dts/loongson/loongson1c.dtsi | 141 ++++++++++
arch/mips/boot/dts/loongson/ls1b-demo.dts | 125 +++++++++
arch/mips/boot/dts/loongson/lsgz_1b_dev.dts | 162 ++++++++++++
arch/mips/boot/dts/loongson/smartloong-1c.dts | 110 ++++++++
.../{loongson1b_defconfig => loongson1_defconfig} | 94 +++++--
arch/mips/configs/loongson1c_defconfig | 121 ---------
arch/mips/include/asm/cpu-type.h | 3 +-
arch/mips/include/asm/cpu.h | 3 +-
arch/mips/include/asm/mach-loongson32/irq.h | 107 --------
arch/mips/include/asm/mach-loongson32/loongson1.h | 50 ----
arch/mips/include/asm/mach-loongson32/platform.h | 23 --
arch/mips/include/asm/mach-loongson32/regs-mux.h | 124 ---------
arch/mips/kernel/cpu-probe.c | 6 +-
arch/mips/loongson32/Kconfig | 43 +---
arch/mips/loongson32/Makefile | 17 --
arch/mips/loongson32/Platform | 1 -
arch/mips/loongson32/common/Makefile | 6 -
arch/mips/loongson32/common/irq.c | 191 --------------
arch/mips/loongson32/common/platform.c | 285 ---------------------
arch/mips/loongson32/common/prom.c | 42 ---
arch/mips/loongson32/common/setup.c | 26 --
arch/mips/loongson32/common/time.c | 23 --
arch/mips/loongson32/ls1b/Makefile | 6 -
arch/mips/loongson32/ls1b/board.c | 55 ----
arch/mips/loongson32/ls1c/Makefile | 6 -
arch/mips/loongson32/ls1c/board.c | 23 --
34 files changed, 1118 insertions(+), 1199 deletions(-)
---
base-commit: b5a1f9870f9828bd6625d6c946c66be4983d56f6
change-id: 20250414-loongson1-arch-5ea8ced4c9a9
Best regards,
--
Keguang Zhang <keguang.zhang@gmail.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 1/9] dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 2/9] MIPS: dts: loongson: Add LS1B-DEMO board Keguang Zhang via B4 Relay
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel, Krzysztof Kozlowski
From: Keguang Zhang <keguang.zhang@gmail.com>
Document two Loongson-1 boards:
- loongson,ls1b-demo: a board based on Loongson-1B
- loongson,cq-t300b: a board based on Loongson-1C
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
Documentation/devicetree/bindings/mips/loongson/devices.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
index 099e40e1482d..ca66bc49c2d6 100644
--- a/Documentation/devicetree/bindings/mips/loongson/devices.yaml
+++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
@@ -40,6 +40,7 @@ properties:
- description: LS1B based boards
items:
- enum:
+ - loongson,ls1b-demo
- loongson,lsgz-1b-dev
- const: loongson,ls1b
@@ -47,6 +48,7 @@ properties:
items:
- enum:
- loongmasses,smartloong-1c
+ - loongson,cq-t300b
- const: loongson,ls1c
additionalProperties: true
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 2/9] MIPS: dts: loongson: Add LS1B-DEMO board
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 1/9] dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 3/9] MIPS: dts: loongson: Add LSGZ_1B_DEV board Keguang Zhang via B4 Relay
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel
From: Keguang Zhang <keguang.zhang@gmail.com>
Add a device tree for LS1B-DEMO board, supporting CPU, clock, INTC,
UART, Ethernet, GPIO, USB host, RTC, watchdog, DMA, NAND, and AC97.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
MAINTAINERS | 1 +
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/loongson/Makefile | 2 +
arch/mips/boot/dts/loongson/loongson1.dtsi | 136 +++++++++++++++++++
arch/mips/boot/dts/loongson/loongson1b.dtsi | 198 ++++++++++++++++++++++++++++
arch/mips/boot/dts/loongson/ls1b-demo.dts | 125 ++++++++++++++++++
6 files changed, 463 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index c3f7fbd0d67a..0089ebca31cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16683,6 +16683,7 @@ M: Keguang Zhang <keguang.zhang@gmail.com>
L: linux-mips@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/*/loongson,ls1*.yaml
+F: arch/mips/boot/dts/loongson/loongson1*
F: arch/mips/include/asm/mach-loongson32/
F: arch/mips/loongson32/
F: drivers/*/*loongson1*
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 7375c6ced82b..6d9dbe945541 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -8,6 +8,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img
subdir-$(CONFIG_MACH_INGENIC) += ingenic
subdir-$(CONFIG_LANTIQ) += lantiq
subdir-$(CONFIG_MACH_LOONGSON64) += loongson
+subdir-$(CONFIG_MACH_LOONGSON32) += loongson
subdir-$(CONFIG_SOC_VCOREIII) += mscc
subdir-$(CONFIG_MIPS_MALTA) += mti
subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index 5e3ab984d70f..88b87c94c545 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -5,3 +5,5 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_4core_rs780e.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_8core_rs780e.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
+
+dtb-$(CONFIG_MACH_LOONGSON32) += ls1b-demo.dtb
diff --git a/arch/mips/boot/dts/loongson/loongson1.dtsi b/arch/mips/boot/dts/loongson/loongson1.dtsi
new file mode 100644
index 000000000000..5ba5a5d131ba
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson1.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/loongson,ls1x-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ xtal: clock {
+ compatible = "fixed-clock";
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ reg = <0>;
+ device_type = "cpu";
+ clocks = <&clkc LS1X_CLKID_CPU>;
+ #clock-cells = <1>;
+ };
+ };
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ };
+
+ soc: bus@1fd00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1fd00000 0x130000>;
+
+ intc0: interrupt-controller@1040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1040 0x18>;
+ interrupt-controller;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ intc1: interrupt-controller@1058 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1058 0x18>;
+ interrupt-controller;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <3>;
+ #interrupt-cells = <2>;
+ };
+
+ intc2: interrupt-controller@1070 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1070 0x18>;
+ interrupt-controller;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ #interrupt-cells = <2>;
+ };
+
+ intc3: interrupt-controller@1088 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1088 0x18>;
+ interrupt-controller;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <5>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio0: gpio@10c0 {
+ compatible = "loongson,ls1x-gpio";
+ reg = <0x10c0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: gpio@10c4 {
+ compatible = "loongson,ls1x-gpio";
+ reg = <0x10c4 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ apb: bus@1fe40000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1fe40000 0xc0000>;
+
+ uart0: serial@0 {
+ compatible = "ns16550a";
+ reg = <0x0 0x8>;
+ clocks = <&clkc LS1X_CLKID_APB>;
+ interrupt-parent = <&intc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: serial@4000 {
+ compatible = "ns16550a";
+ reg = <0x4000 0x8>;
+ clocks = <&clkc LS1X_CLKID_APB>;
+ interrupt-parent = <&intc0>;
+ status = "disabled";
+ };
+
+ uart2: serial@8000 {
+ compatible = "ns16550a";
+ reg = <0x8000 0x8>;
+ clocks = <&clkc LS1X_CLKID_APB>;
+ interrupt-parent = <&intc0>;
+ status = "disabled";
+ };
+
+ uart3: serial@c000 {
+ compatible = "ns16550a";
+ reg = <0xc000 0x8>;
+ clocks = <&clkc LS1X_CLKID_APB>;
+ interrupt-parent = <&intc0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/loongson1b.dtsi b/arch/mips/boot/dts/loongson/loongson1b.dtsi
new file mode 100644
index 000000000000..776d272b0f43
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson1b.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+#include "loongson1.dtsi"
+
+/ {
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-44000000 {
+ opp-hz = /bits/ 64 <44000000>;
+ };
+ opp-47142000 {
+ opp-hz = /bits/ 64 <47142000>;
+ };
+ opp-50769000 {
+ opp-hz = /bits/ 64 <50769000>;
+ };
+ opp-55000000 {
+ opp-hz = /bits/ 64 <55000000>;
+ };
+ opp-60000000 {
+ opp-hz = /bits/ 64 <60000000>;
+ };
+ opp-66000000 {
+ opp-hz = /bits/ 64 <66000000>;
+ };
+ opp-73333000 {
+ opp-hz = /bits/ 64 <73333000>;
+ };
+ opp-82500000 {
+ opp-hz = /bits/ 64 <82500000>;
+ };
+ opp-94285000 {
+ opp-hz = /bits/ 64 <94285000>;
+ };
+ opp-110000000 {
+ opp-hz = /bits/ 64 <110000000>;
+ };
+ opp-132000000 {
+ opp-hz = /bits/ 64 <132000000>;
+ };
+ opp-165000000 {
+ opp-hz = /bits/ 64 <165000000>;
+ };
+ opp-220000000 {
+ opp-hz = /bits/ 64 <220000000>;
+ };
+ };
+
+ clkc: clock-controller@1fe78030 {
+ compatible = "loongson,ls1b-clk";
+ reg = <0x1fe78030 0x8>;
+ clocks = <&xtal>;
+ #clock-cells = <1>;
+ };
+};
+
+&soc {
+ syscon: syscon@420 {
+ compatible = "loongson,ls1b-syscon", "syscon";
+ reg = <0x420 0x8>;
+ };
+
+ dma: dma-controller@1160 {
+ compatible = "loongson,ls1b-apbdma";
+ reg = <0x1160 0x4>;
+ interrupt-parent = <&intc0>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>,
+ <14 IRQ_TYPE_EDGE_RISING>,
+ <15 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ch0", "ch1", "ch2";
+ #dma-cells = <1>;
+ };
+
+ ehci: usb@100000 {
+ compatible = "generic-ehci";
+ reg = <0x100000 0x100>;
+ interrupt-parent = <&intc1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci: usb@108000 {
+ compatible = "generic-ohci";
+ reg = <0x108000 0x100>;
+ interrupt-parent = <&intc1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gmac0: ethernet@110000 {
+ compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a";
+ reg = <0x110000 0x10000>;
+ clocks = <&clkc LS1X_CLKID_AHB>;
+ clock-names = "stmmaceth";
+ interrupt-parent = <&intc1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ loongson,ls1-syscon = <&syscon>;
+ snps,pbl = <1>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@120000 {
+ compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a";
+ reg = <0x120000 0x10000>;
+ clocks = <&clkc LS1X_CLKID_AHB>;
+ clock-names = "stmmaceth";
+ interrupt-parent = <&intc1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ loongson,ls1-syscon = <&syscon>;
+ snps,pbl = <1>;
+ status = "disabled";
+ };
+};
+
+&apb {
+ clocksource: timer@1c030 {
+ compatible = "loongson,ls1b-pwmtimer";
+ reg = <0x1c030 0x10>;
+ clocks = <&clkc LS1X_CLKID_APB>;
+ interrupt-parent = <&intc0>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog: watchdog@1c060 {
+ compatible = "loongson,ls1b-wdt";
+ reg = <0x1c060 0xc>;
+ clocks = <&clkc LS1X_CLKID_APB>;
+ status = "disabled";
+ };
+
+ rtc: rtc@24000 {
+ compatible = "loongson,ls1b-rtc";
+ reg = <0x24000 0x78>;
+ interrupt-parent = <&intc0>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ac97: audio-controller@34000 {
+ compatible = "loongson,ls1b-ac97";
+ reg = <0x34000 0x60>, <0x32420 0x4>, <0x34c4c 0x4>;
+ reg-names = "ac97", "audio-tx", "audio-rx";
+ dmas = <&dma 1>, <&dma 2>;
+ dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ nand: nand-controller@38000 {
+ compatible = "loongson,ls1b-nand-controller";
+ reg = <0x38000 0x24>, <0x38040 0x4>;
+ reg-names = "nand", "nand-dma";
+ dmas = <&dma 0>;
+ dma-names = "rxtx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ nand@0 {
+ reg = <0>;
+ label = "ls1x-nand";
+ nand-use-soft-ecc-engine;
+ nand-ecc-algo = "hamming";
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&gpio0 {
+ ngpios = <31>;
+};
+
+&gpio1 {
+ ngpios = <30>;
+};
+
+&uart1 {
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart2 {
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart3 {
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/mips/boot/dts/loongson/ls1b-demo.dts b/arch/mips/boot/dts/loongson/ls1b-demo.dts
new file mode 100644
index 000000000000..13f8b102e100
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/ls1b-demo.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1b.dtsi"
+
+/ {
+ compatible = "loongson,ls1b-demo", "loongson,ls1b";
+ model = "LS1B-DEMO Board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:38400n8";
+ };
+
+ codec: audio-codec {
+ compatible = "realtek,alc203";
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "ls1b-alc203";
+ simple-audio-card,format = "ac97";
+ simple-audio-card,widgets =
+ "Speaker", "Line Out Jack",
+ "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack";
+ simple-audio-card,routing =
+ "Line Out Jack", "TX",
+ "Headphone Jack", "TX",
+ "RX", "Microphone Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ac97>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&xtal {
+ clock-frequency = <33000000>;
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x1000000 0x7000000>;
+ };
+ };
+ };
+};
+
+&ac97 {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 3/9] MIPS: dts: loongson: Add LSGZ_1B_DEV board
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 1/9] dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 2/9] MIPS: dts: loongson: Add LS1B-DEMO board Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 4/9] MIPS: dts: loongson: Add Smartloong-1C board Keguang Zhang via B4 Relay
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel
From: Keguang Zhang <keguang.zhang@gmail.com>
Add a device tree for LSGZ_1B_DEV board.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
arch/mips/boot/dts/loongson/Makefile | 1 +
arch/mips/boot/dts/loongson/lsgz_1b_dev.dts | 162 ++++++++++++++++++++++++++++
2 files changed, 163 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index 88b87c94c545..1130efa12768 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -7,3 +7,4 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += ls1b-demo.dtb
+dtb-$(CONFIG_MACH_LOONGSON32) += lsgz_1b_dev.dtb
diff --git a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
new file mode 100644
index 000000000000..94ec151c0a94
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1b.dtsi"
+
+/ {
+ compatible = "loongson,lsgz-1b-dev", "loongson,ls1b";
+ model = "LSGZ_1B_DEV Board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ serial0 = &uart2;
+ serial1 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led9 {
+ label = "led9";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led6 {
+ label = "led6";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "nand-disk";
+ };
+ };
+
+ codec: audio-codec {
+ compatible = "realtek,alc203";
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "ls1b-alc655";
+ simple-audio-card,format = "ac97";
+ simple-audio-card,widgets =
+ "Speaker", "Line Out Jack",
+ "Line", "Line In Jack",
+ "Microphone", "Microphone Jack";
+ simple-audio-card,routing =
+ "Line Out Jack", "TX",
+ "RX", "Line In Jack",
+ "RX", "Microphone Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ac97>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&xtal {
+ clock-frequency = <33000000>;
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
+
+&gmac1 {
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x1000000 0x7000000>;
+ };
+ };
+ };
+};
+
+&ac97 {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 4/9] MIPS: dts: loongson: Add Smartloong-1C board
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
` (2 preceding siblings ...)
2025-07-16 11:25 ` [PATCH v3 3/9] MIPS: dts: loongson: Add LSGZ_1B_DEV board Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 5/9] MIPS: dts: loongson: Add CQ-T300B board Keguang Zhang via B4 Relay
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel
From: Keguang Zhang <keguang.zhang@gmail.com>
Add a device tree for Smartloong-1C board, supporting CPU, clock, INTC,
UART, Ethernet, GPIO, USB host, RTC, watchdog, DMA, and NAND.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
arch/mips/boot/dts/loongson/Makefile | 1 +
arch/mips/boot/dts/loongson/loongson1c.dtsi | 141 ++++++++++++++++++++++++++
arch/mips/boot/dts/loongson/smartloong-1c.dts | 110 ++++++++++++++++++++
3 files changed, 252 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index 1130efa12768..de4570380c3e 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -8,3 +8,4 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += ls1b-demo.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += lsgz_1b_dev.dtb
+dtb-$(CONFIG_MACH_LOONGSON32) += smartloong-1c.dtb
diff --git a/arch/mips/boot/dts/loongson/loongson1c.dtsi b/arch/mips/boot/dts/loongson/loongson1c.dtsi
new file mode 100644
index 000000000000..5e80c6a657af
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson1c.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+#include "loongson1.dtsi"
+
+/ {
+ clkc: clock-controller@1fe78030 {
+ compatible = "loongson,ls1c-clk";
+ reg = <0x1fe78030 0x8>;
+ clocks = <&xtal>;
+ #clock-cells = <1>;
+ };
+};
+
+&soc {
+ syscon: syscon@420 {
+ compatible = "loongson,ls1c-syscon", "syscon";
+ reg = <0x420 0x8>;
+ };
+
+ intc4: interrupt-controller@10a0 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x10a0 0x18>;
+ interrupt-controller;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <6>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@10c8 {
+ compatible = "loongson,ls1x-gpio";
+ reg = <0x10c8 0x4>;
+ gpio-controller;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ };
+
+ gpio3: gpio@10cc {
+ compatible = "loongson,ls1x-gpio";
+ reg = <0x10cc 0x4>;
+ gpio-controller;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ };
+
+ dma: dma-controller@1160 {
+ compatible = "loongson,ls1c-apbdma", "loongson,ls1b-apbdma";
+ reg = <0x1160 0x4>;
+ interrupt-parent = <&intc0>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>,
+ <14 IRQ_TYPE_EDGE_RISING>,
+ <15 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ch0", "ch1", "ch2";
+ #dma-cells = <1>;
+ };
+
+ emac: ethernet@110000 {
+ compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a";
+ reg = <0x110000 0x10000>;
+ clocks = <&clkc LS1X_CLKID_AHB>;
+ clock-names = "stmmaceth";
+ interrupt-parent = <&intc1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ loongson,ls1-syscon = <&syscon>;
+ snps,pbl = <1>;
+ status = "disabled";
+ };
+
+ ehci: usb@120000 {
+ compatible = "generic-ehci";
+ reg = <0x120000 0x100>;
+ interrupt-parent = <&intc1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci: usb@128000 {
+ compatible = "generic-ohci";
+ reg = <0x128000 0x100>;
+ interrupt-parent = <&intc1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+};
+
+&apb {
+ watchdog: watchdog@1c060 {
+ compatible = "loongson,ls1c-wdt";
+ reg = <0x1c060 0xc>;
+ clocks = <&clkc LS1X_CLKID_APB>;
+ status = "disabled";
+ };
+
+ rtc: rtc@24000 {
+ compatible = "loongson,ls1c-rtc";
+ reg = <0x24000 0x78>;
+ status = "disabled";
+ };
+
+ nand: nand-controller@38000 {
+ compatible = "loongson,ls1c-nand-controller";
+ reg = <0x38000 0x24>, <0x38040 0x4>;
+ reg-names = "nand", "nand-dma";
+ dmas = <&dma 0>;
+ dma-names = "rxtx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ nand@0 {
+ reg = <0>;
+ label = "ls1x-nand";
+ nand-use-soft-ecc-engine;
+ nand-ecc-algo = "hamming";
+ };
+ };
+};
+
+&gpio0 {
+ ngpios = <32>;
+};
+
+&gpio1 {
+ ngpios = <32>;
+};
+
+&uart1 {
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart2 {
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart3 {
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/mips/boot/dts/loongson/smartloong-1c.dts b/arch/mips/boot/dts/loongson/smartloong-1c.dts
new file mode 100644
index 000000000000..e6c6c2f00c42
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/smartloong-1c.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1c.dtsi"
+
+/ {
+ compatible = "loongmasses,smartloong-1c", "loongson,ls1c";
+ model = "Smartloong-1C Board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "led0";
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "nand-disk";
+ };
+ };
+};
+
+&xtal {
+ clock-frequency = <24000000>;
+};
+
+&emac {
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x1000000 0x7000000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 5/9] MIPS: dts: loongson: Add CQ-T300B board
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
` (3 preceding siblings ...)
2025-07-16 11:25 ` [PATCH v3 4/9] MIPS: dts: loongson: Add Smartloong-1C board Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 6/9] MIPS: loongson: Add built-in DTB support Keguang Zhang via B4 Relay
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel
From: Keguang Zhang <keguang.zhang@gmail.com>
Add a device tree for CQ-T300B board.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
arch/mips/boot/dts/loongson/Makefile | 1 +
arch/mips/boot/dts/loongson/cq-t300b.dts | 110 +++++++++++++++++++++++++++++++
2 files changed, 111 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index de4570380c3e..e8f76e7ac303 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_8core_rs780e.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
+dtb-$(CONFIG_MACH_LOONGSON32) += cq-t300b.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += ls1b-demo.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += lsgz_1b_dev.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += smartloong-1c.dtb
diff --git a/arch/mips/boot/dts/loongson/cq-t300b.dts b/arch/mips/boot/dts/loongson/cq-t300b.dts
new file mode 100644
index 000000000000..5244fab2496d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/cq-t300b.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1c.dtsi"
+
+/ {
+ compatible = "loongson,cq-t300b", "loongson,ls1c";
+ model = "CQ-T300B Board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "led0";
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "nand-disk";
+ };
+ };
+};
+
+&xtal {
+ clock-frequency = <24000000>;
+};
+
+&emac {
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 6/9] MIPS: loongson: Add built-in DTB support
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
` (4 preceding siblings ...)
2025-07-16 11:25 ` [PATCH v3 5/9] MIPS: dts: loongson: Add CQ-T300B board Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 7/9] MIPS: loongson32: Switch to generic core Keguang Zhang via B4 Relay
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel
From: Keguang Zhang <keguang.zhang@gmail.com>
Since the current bootloader for Loongson-1 does not support FDT,
introduce CONFIG_BUILTIN_DTB_NAME to enable a built-in DTB.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
arch/mips/boot/dts/loongson/Makefile | 5 +++++
arch/mips/loongson32/Kconfig | 8 ++++++++
2 files changed, 13 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index e8f76e7ac303..8ee12504d353 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -1,4 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
+
+ifneq ($(CONFIG_BUILTIN_DTB_NAME),)
+dtb-y := $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
+else
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64_2core_2k1000.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_4core_ls7a.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_4core_rs780e.dtb
@@ -10,3 +14,4 @@ dtb-$(CONFIG_MACH_LOONGSON32) += cq-t300b.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += ls1b-demo.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += lsgz_1b_dev.dtb
dtb-$(CONFIG_MACH_LOONGSON32) += smartloong-1c.dtb
+endif
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index a7c500959577..52e925309f15 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -36,3 +36,11 @@ config LOONGSON1_LS1C
endchoice
endif # MACH_LOONGSON32
+
+config BUILTIN_DTB_NAME
+ string "Source file for built-in DTB"
+ depends on BUILTIN_DTB
+ help
+ Base name (without suffix, relative to arch/mips/boot/dts/loongson)
+ for the DTS file that will be used to produce the DTB linked into
+ the kernel.
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 7/9] MIPS: loongson32: Switch to generic core
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
` (5 preceding siblings ...)
2025-07-16 11:25 ` [PATCH v3 6/9] MIPS: loongson: Add built-in DTB support Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 8/9] MIPS: Unify Loongson1 PRID_REV Keguang Zhang via B4 Relay
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel
From: Keguang Zhang <keguang.zhang@gmail.com>
The generic MIPS core is fully compatible with Loongson-1 SoCs,
so migrate Loongson-1 to it.
Main changes are:
- Merge CPU_LOONGSON1B and CPU_LOONGSON1C into a unified CPU_LOONGSON32,
as both are based on the GS232 core.
- Consolidate LOONGSON1_LS1B and LOONGSON1_LS1C Kconfig options into
MACH_LOONGSON32.
- Enable MACH_GENERIC_CORE and remove the legacy custom implementation.
- Remove all Loongson-1 platform devices and associated code,
which are now obsolete due to Device Tree support.
- Misc cleanup.
Partially based on earlier work by Jiaxun Yang.
Link: https://lore.kernel.org/all/20190411121915.8040-4-jiaxun.yang@flygoat.com/
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
MAINTAINERS | 1 -
arch/mips/Kconfig | 64 ++---
arch/mips/include/asm/cpu-type.h | 3 +-
arch/mips/include/asm/mach-loongson32/irq.h | 107 --------
arch/mips/include/asm/mach-loongson32/loongson1.h | 50 ----
arch/mips/include/asm/mach-loongson32/platform.h | 23 --
arch/mips/include/asm/mach-loongson32/regs-mux.h | 124 ----------
arch/mips/loongson32/Kconfig | 37 ---
arch/mips/loongson32/Makefile | 17 --
arch/mips/loongson32/Platform | 1 -
arch/mips/loongson32/common/Makefile | 6 -
arch/mips/loongson32/common/irq.c | 191 ---------------
arch/mips/loongson32/common/platform.c | 285 ----------------------
arch/mips/loongson32/common/prom.c | 42 ----
arch/mips/loongson32/common/setup.c | 26 --
arch/mips/loongson32/common/time.c | 23 --
arch/mips/loongson32/ls1b/Makefile | 6 -
arch/mips/loongson32/ls1b/board.c | 55 -----
arch/mips/loongson32/ls1c/Makefile | 6 -
arch/mips/loongson32/ls1c/board.c | 23 --
20 files changed, 33 insertions(+), 1057 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0089ebca31cf..d42a83656879 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16684,7 +16684,6 @@ L: linux-mips@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/*/loongson,ls1*.yaml
F: arch/mips/boot/dts/loongson/loongson1*
-F: arch/mips/include/asm/mach-loongson32/
F: arch/mips/loongson32/
F: drivers/*/*loongson1*
F: drivers/mtd/nand/raw/loongson1-nand-controller.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1e48184ecf1e..643236ab5a01 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -481,6 +481,23 @@ config LANTIQ
config MACH_LOONGSON32
bool "Loongson 32-bit family of machines"
+ select MACH_GENERIC_CORE
+ select USE_OF
+ select BUILTIN_DTB
+ select BOOT_ELF32
+ select CEVT_R4K
+ select CSRC_R4K
+ select COMMON_CLK
+ select DMA_NONCOHERENT
+ select GENERIC_IRQ_SHOW_LEVEL
+ select IRQ_MIPS_CPU
+ select LS1X_IRQ
+ select SYS_HAS_CPU_LOONGSON32
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_ZBOOT
help
This enables support for the Loongson-1 family of machines.
@@ -1386,25 +1403,20 @@ config CPU_LOONGSON2F
have a similar programming interface with FPGA northbridge used in
Loongson2E.
-config CPU_LOONGSON1B
- bool "Loongson 1B"
- depends on SYS_HAS_CPU_LOONGSON1B
- select CPU_LOONGSON32
- select LEDS_GPIO_REGISTER
- help
- The Loongson 1B is a 32-bit SoC, which implements the MIPS32
- Release 1 instruction set and part of the MIPS32 Release 2
- instruction set.
-
-config CPU_LOONGSON1C
- bool "Loongson 1C"
- depends on SYS_HAS_CPU_LOONGSON1C
- select CPU_LOONGSON32
+config CPU_LOONGSON32
+ bool "Loongson 32-bit CPU"
+ depends on SYS_HAS_CPU_LOONGSON32
+ select CPU_MIPS32
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
+ select CPU_HAS_LOAD_STORE_LR
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_CPUFREQ
select LEDS_GPIO_REGISTER
help
- The Loongson 1C is a 32-bit SoC, which implements the MIPS32
- Release 1 instruction set and part of the MIPS32 Release 2
- instruction set.
+ The Loongson GS232 microarchitecture implements the MIPS32 Release 1
+ instruction set and part of the MIPS32 Release 2 instruction set.
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
@@ -1838,15 +1850,6 @@ config CPU_LOONGSON2EF
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
-config CPU_LOONGSON32
- bool
- select CPU_MIPS32
- select CPU_MIPSR2
- select CPU_HAS_PREFETCH
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_HIGHMEM
- select CPU_SUPPORTS_CPUFREQ
-
config CPU_BMIPS32_3300
select SMP_UP if SMP
bool
@@ -1884,10 +1887,7 @@ config SYS_HAS_CPU_LOONGSON2F
select CPU_SUPPORTS_CPUFREQ
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
-config SYS_HAS_CPU_LOONGSON1B
- bool
-
-config SYS_HAS_CPU_LOONGSON1C
+config SYS_HAS_CPU_LOONGSON32
bool
config SYS_HAS_CPU_MIPS32_R1
@@ -2999,8 +2999,8 @@ choice
prompt "Kernel command line type"
depends on !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
- !MACH_LOONGSON64 && !MIPS_MALTA && \
- !CAVIUM_OCTEON_SOC
+ !MACH_LOONGSON64 && !MACH_LOONGSON32 && \
+ !MIPS_MALTA && !CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER
config MIPS_CMDLINE_FROM_DTB
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index a4a66bd93748..fd37a44a2f19 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -24,8 +24,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_LOONGSON64:
#endif
-#if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
- defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON32
case CPU_LOONGSON32:
#endif
diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
deleted file mode 100644
index 6115f025ba21..000000000000
--- a/arch/mips/include/asm/mach-loongson32/irq.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * IRQ mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_IRQ_H
-#define __ASM_MACH_LOONGSON32_IRQ_H
-
-/*
- * CPU core Interrupt Numbers
- */
-#define MIPS_CPU_IRQ_BASE 0
-#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
-
-#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
-#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
-#define INT0_IRQ MIPS_CPU_IRQ(2)
-#define INT1_IRQ MIPS_CPU_IRQ(3)
-#define INT2_IRQ MIPS_CPU_IRQ(4)
-#define INT3_IRQ MIPS_CPU_IRQ(5)
-#define INT4_IRQ MIPS_CPU_IRQ(6)
-#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
-
-#define MIPS_CPU_IRQS (MIPS_CPU_IRQ(7) + 1 - MIPS_CPU_IRQ_BASE)
-
-/*
- * INT0~3 Interrupt Numbers
- */
-#define LS1X_IRQ_BASE MIPS_CPU_IRQS
-#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
-
-#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
-#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
-#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART1_IRQ LS1X_IRQ(0, 4)
-#define LS1X_UART2_IRQ LS1X_IRQ(0, 5)
-#endif
-#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
-#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
-#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
-#define LS1X_SPI1_IRQ LS1X_IRQ(0, 9)
-#define LS1X_AC97_IRQ LS1X_IRQ(0, 10)
-#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
-#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
-#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
-#if defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_NAND_IRQ LS1X_IRQ(0, 16)
-#endif
-#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
-#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
-#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
-#define LS1X_PWM3_IRQ LS1X_IRQ(0, 20)
-#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
-#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
-#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
-#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
-#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
-#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
-#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
-#define LS1X_UART4_IRQ LS1X_IRQ(0, 29)
-#define LS1X_UART5_IRQ LS1X_IRQ(0, 30)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART3_IRQ LS1X_IRQ(0, 29)
-#define LS1X_ADC_IRQ LS1X_IRQ(0, 30)
-#define LS1X_SDIO_IRQ LS1X_IRQ(0, 31)
-#endif
-
-#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
-#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
-#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_OTG_IRQ LS1X_IRQ(1, 2)
-#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 3)
-#define LS1X_CAM_IRQ LS1X_IRQ(1, 4)
-#define LS1X_UART4_IRQ LS1X_IRQ(1, 5)
-#define LS1X_UART5_IRQ LS1X_IRQ(1, 6)
-#define LS1X_UART6_IRQ LS1X_IRQ(1, 7)
-#define LS1X_UART7_IRQ LS1X_IRQ(1, 8)
-#define LS1X_UART8_IRQ LS1X_IRQ(1, 9)
-#define LS1X_UART9_IRQ LS1X_IRQ(1, 13)
-#define LS1X_UART10_IRQ LS1X_IRQ(1, 14)
-#define LS1X_UART11_IRQ LS1X_IRQ(1, 15)
-#define LS1X_I2C0_IRQ LS1X_IRQ(1, 17)
-#define LS1X_I2C1_IRQ LS1X_IRQ(1, 18)
-#define LS1X_I2C2_IRQ LS1X_IRQ(1, 19)
-#endif
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define INTN 4
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define INTN 5
-#endif
-
-#define LS1X_IRQS (LS1X_IRQ(INTN, 31) + 1 - LS1X_IRQ_BASE)
-
-#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
-
-#endif /* __ASM_MACH_LOONGSON32_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
deleted file mode 100644
index 84f45461c832..000000000000
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Register mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
-#define __ASM_MACH_LOONGSON32_LOONGSON1_H
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define DEFAULT_MEMSIZE 64 /* If no memsize provided */
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define DEFAULT_MEMSIZE 32
-#endif
-
-/* Loongson 1 Register Bases */
-#define LS1X_MUX_BASE 0x1fd00420
-#define LS1X_INTC_BASE 0x1fd01040
-#define LS1X_GPIO0_BASE 0x1fd010c0
-#define LS1X_GPIO1_BASE 0x1fd010c4
-#define LS1X_DMAC_BASE 0x1fd01160
-#define LS1X_CBUS_BASE 0x1fd011c0
-#define LS1X_EHCI_BASE 0x1fe00000
-#define LS1X_OHCI_BASE 0x1fe08000
-#define LS1X_GMAC0_BASE 0x1fe10000
-#define LS1X_GMAC1_BASE 0x1fe20000
-
-#define LS1X_UART0_BASE 0x1fe40000
-#define LS1X_UART1_BASE 0x1fe44000
-#define LS1X_UART2_BASE 0x1fe48000
-#define LS1X_UART3_BASE 0x1fe4c000
-#define LS1X_CAN0_BASE 0x1fe50000
-#define LS1X_CAN1_BASE 0x1fe54000
-#define LS1X_I2C0_BASE 0x1fe58000
-#define LS1X_I2C1_BASE 0x1fe68000
-#define LS1X_I2C2_BASE 0x1fe70000
-#define LS1X_PWM0_BASE 0x1fe5c000
-#define LS1X_PWM1_BASE 0x1fe5c010
-#define LS1X_PWM2_BASE 0x1fe5c020
-#define LS1X_PWM3_BASE 0x1fe5c030
-#define LS1X_WDT_BASE 0x1fe5c060
-#define LS1X_RTC_BASE 0x1fe64000
-#define LS1X_AC97_BASE 0x1fe74000
-#define LS1X_NAND_BASE 0x1fe78000
-#define LS1X_CLK_BASE 0x1fe78030
-
-#include <regs-mux.h>
-
-#endif /* __ASM_MACH_LOONGSON32_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
deleted file mode 100644
index f74292b13bc3..000000000000
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
-#define __ASM_MACH_LOONGSON32_PLATFORM_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device ls1x_uart_pdev;
-extern struct platform_device ls1x_eth0_pdev;
-extern struct platform_device ls1x_eth1_pdev;
-extern struct platform_device ls1x_ehci_pdev;
-extern struct platform_device ls1x_gpio0_pdev;
-extern struct platform_device ls1x_gpio1_pdev;
-extern struct platform_device ls1x_rtc_pdev;
-extern struct platform_device ls1x_wdt_pdev;
-
-void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
-void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
-
-#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
deleted file mode 100644
index 95788a4f03a0..000000000000
--- a/arch/mips/include/asm/mach-loongson32/regs-mux.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 MUX Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_MUX_H
-#define __ASM_MACH_LOONGSON32_REGS_MUX_H
-
-#define LS1X_MUX_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
-
-#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
-#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-/* MUX CTRL0 Register Bits */
-#define UART0_USE_PWM23 BIT(28)
-#define UART0_USE_PWM01 BIT(27)
-#define UART1_USE_LCD0_5_6_11 BIT(26)
-#define I2C2_USE_CAN1 BIT(25)
-#define I2C1_USE_CAN0 BIT(24)
-#define NAND3_USE_UART5 BIT(23)
-#define NAND3_USE_UART4 BIT(22)
-#define NAND3_USE_UART1_DAT BIT(21)
-#define NAND3_USE_UART1_CTS BIT(20)
-#define NAND3_USE_PWM23 BIT(19)
-#define NAND3_USE_PWM01 BIT(18)
-#define NAND2_USE_UART5 BIT(17)
-#define NAND2_USE_UART4 BIT(16)
-#define NAND2_USE_UART1_DAT BIT(15)
-#define NAND2_USE_UART1_CTS BIT(14)
-#define NAND2_USE_PWM23 BIT(13)
-#define NAND2_USE_PWM01 BIT(12)
-#define NAND1_USE_UART5 BIT(11)
-#define NAND1_USE_UART4 BIT(10)
-#define NAND1_USE_UART1_DAT BIT(9)
-#define NAND1_USE_UART1_CTS BIT(8)
-#define NAND1_USE_PWM23 BIT(7)
-#define NAND1_USE_PWM01 BIT(6)
-#define GMAC1_USE_UART1 BIT(4)
-#define GMAC1_USE_UART0 BIT(3)
-#define LCD_USE_UART0_DAT BIT(2)
-#define LCD_USE_UART15 BIT(1)
-#define LCD_USE_UART0 BIT(0)
-
-/* MUX CTRL1 Register Bits */
-#define USB_RESET BIT(31)
-#define SPI1_CS_USE_PWM01 BIT(24)
-#define SPI1_USE_CAN BIT(23)
-#define DISABLE_DDR_CONFSPACE BIT(20)
-#define DDR32TO16EN BIT(16)
-#define GMAC1_SHUT BIT(13)
-#define GMAC0_SHUT BIT(12)
-#define USB_SHUT BIT(11)
-#define UART1_3_USE_CAN1 BIT(5)
-#define UART1_2_USE_CAN0 BIT(4)
-#define GMAC1_USE_TXCLK BIT(3)
-#define GMAC0_USE_TXCLK BIT(2)
-#define GMAC1_USE_PWM23 BIT(1)
-#define GMAC0_USE_PWM01 BIT(0)
-
-#elif defined(CONFIG_LOONGSON1_LS1C)
-
-/* SHUT_CTRL Register Bits */
-#define UART_SPLIT GENMASK(31, 30)
-#define OUTPUT_CLK GENMASK(29, 26)
-#define ADC_SHUT BIT(25)
-#define SDIO_SHUT BIT(24)
-#define DMA2_SHUT BIT(23)
-#define DMA1_SHUT BIT(22)
-#define DMA0_SHUT BIT(21)
-#define SPI1_SHUT BIT(20)
-#define SPI0_SHUT BIT(19)
-#define I2C2_SHUT BIT(18)
-#define I2C1_SHUT BIT(17)
-#define I2C0_SHUT BIT(16)
-#define AC97_SHUT BIT(15)
-#define I2S_SHUT BIT(14)
-#define UART3_SHUT BIT(13)
-#define UART2_SHUT BIT(12)
-#define UART1_SHUT BIT(11)
-#define UART0_SHUT BIT(10)
-#define CAN1_SHUT BIT(9)
-#define CAN0_SHUT BIT(8)
-#define ECC_SHUT BIT(7)
-#define GMAC_SHUT BIT(6)
-#define USBHOST_SHUT BIT(5)
-#define USBOTG_SHUT BIT(4)
-#define SDRAM_SHUT BIT(3)
-#define SRAM_SHUT BIT(2)
-#define CAM_SHUT BIT(1)
-#define LCD_SHUT BIT(0)
-
-#define UART_SPLIT_SHIFT 30
-#define OUTPUT_CLK_SHIFT 26
-
-/* MISC_CTRL Register Bits */
-#define USBHOST_RSTN BIT(31)
-#define PHY_INTF_SELI GENMASK(30, 28)
-#define AC97_EN BIT(25)
-#define SDIO_DMA_EN GENMASK(24, 23)
-#define ADC_DMA_EN BIT(22)
-#define SDIO_USE_SPI1 BIT(17)
-#define SDIO_USE_SPI0 BIT(16)
-#define SRAM_CTRL GENMASK(15, 0)
-
-#define PHY_INTF_SELI_SHIFT 28
-#define SDIO_DMA_EN_SHIFT 23
-#define SRAM_CTRL_SHIFT 0
-
-#define LS1X_CBUS_REG(n, x) \
- ((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
-
-#define LS1X_CBUS_FIRST(n) LS1X_CBUS_REG(n, 0x00)
-#define LS1X_CBUS_SECOND(n) LS1X_CBUS_REG(n, 0x10)
-#define LS1X_CBUS_THIRD(n) LS1X_CBUS_REG(n, 0x20)
-#define LS1X_CBUS_FOURTHT(n) LS1X_CBUS_REG(n, 0x30)
-#define LS1X_CBUS_FIFTHT(n) LS1X_CBUS_REG(n, 0x40)
-
-#endif
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 52e925309f15..461d518b0033 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -1,41 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-if MACH_LOONGSON32
-
-choice
- prompt "Machine Type"
-
-config LOONGSON1_LS1B
- bool "Loongson LS1B board"
- select CEVT_R4K if !MIPS_EXTERNAL_TIMER
- select CSRC_R4K if !MIPS_EXTERNAL_TIMER
- select SYS_HAS_CPU_LOONGSON1B
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select IRQ_MIPS_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select USE_GENERIC_EARLY_PRINTK_8250
- select COMMON_CLK
-
-config LOONGSON1_LS1C
- bool "Loongson LS1C board"
- select CEVT_R4K if !MIPS_EXTERNAL_TIMER
- select CSRC_R4K if !MIPS_EXTERNAL_TIMER
- select SYS_HAS_CPU_LOONGSON1C
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select IRQ_MIPS_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select USE_GENERIC_EARLY_PRINTK_8250
- select COMMON_CLK
-endchoice
-
-endif # MACH_LOONGSON32
config BUILTIN_DTB_NAME
string "Source file for built-in DTB"
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index ba10954b4b21..a4e40e534e6a 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -1,18 +1 @@
# SPDX-License-Identifier: GPL-2.0-only
-#
-# Common code for all Loongson 1 based systems
-#
-
-obj-$(CONFIG_MACH_LOONGSON32) += common/
-
-#
-# Loongson LS1B board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
-
-#
-# Loongson LS1C board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1C) += ls1c/
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index 3b9673e7a2fa..67fd07450488 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -1,3 +1,2 @@
cflags-$(CONFIG_CPU_LOONGSON32) += -march=mips32r2 -Wa,--trap
-cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
load-$(CONFIG_CPU_LOONGSON32) += 0xffffffff80200000
diff --git a/arch/mips/loongson32/common/Makefile b/arch/mips/loongson32/common/Makefile
deleted file mode 100644
index f3950d308187..000000000000
--- a/arch/mips/loongson32/common/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for common code of loongson1 based machines.
-#
-
-obj-y += time.o irq.o platform.o prom.o setup.o
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
deleted file mode 100644
index 9a50070f74f7..000000000000
--- a/arch/mips/loongson32/common/irq.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq_cpu.h>
-
-#include <loongson1.h>
-#include <irq.h>
-
-#define LS1X_INTC_REG(n, x) \
- ((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
-
-#define LS1X_INTC_INTISR(n) LS1X_INTC_REG(n, 0x0)
-#define LS1X_INTC_INTIEN(n) LS1X_INTC_REG(n, 0x4)
-#define LS1X_INTC_INTSET(n) LS1X_INTC_REG(n, 0x8)
-#define LS1X_INTC_INTCLR(n) LS1X_INTC_REG(n, 0xc)
-#define LS1X_INTC_INTPOL(n) LS1X_INTC_REG(n, 0x10)
-#define LS1X_INTC_INTEDGE(n) LS1X_INTC_REG(n, 0x14)
-
-static void ls1x_irq_ack(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
- | (1 << bit), LS1X_INTC_INTCLR(n));
-}
-
-static void ls1x_irq_mask(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
- & ~(1 << bit), LS1X_INTC_INTIEN(n));
-}
-
-static void ls1x_irq_mask_ack(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
- & ~(1 << bit), LS1X_INTC_INTIEN(n));
- __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
- | (1 << bit), LS1X_INTC_INTCLR(n));
-}
-
-static void ls1x_irq_unmask(struct irq_data *d)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
- | (1 << bit), LS1X_INTC_INTIEN(n));
-}
-
-static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
-{
- unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
- unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
- switch (type) {
- case IRQ_TYPE_LEVEL_HIGH:
- __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
- | (1 << bit), LS1X_INTC_INTPOL(n));
- __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
- & ~(1 << bit), LS1X_INTC_INTEDGE(n));
- break;
- case IRQ_TYPE_LEVEL_LOW:
- __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
- & ~(1 << bit), LS1X_INTC_INTPOL(n));
- __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
- & ~(1 << bit), LS1X_INTC_INTEDGE(n));
- break;
- case IRQ_TYPE_EDGE_RISING:
- __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
- | (1 << bit), LS1X_INTC_INTPOL(n));
- __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
- | (1 << bit), LS1X_INTC_INTEDGE(n));
- break;
- case IRQ_TYPE_EDGE_FALLING:
- __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
- & ~(1 << bit), LS1X_INTC_INTPOL(n));
- __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
- | (1 << bit), LS1X_INTC_INTEDGE(n));
- break;
- case IRQ_TYPE_EDGE_BOTH:
- __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
- & ~(1 << bit), LS1X_INTC_INTPOL(n));
- __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
- | (1 << bit), LS1X_INTC_INTEDGE(n));
- break;
- case IRQ_TYPE_NONE:
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct irq_chip ls1x_irq_chip = {
- .name = "LS1X-INTC",
- .irq_ack = ls1x_irq_ack,
- .irq_mask = ls1x_irq_mask,
- .irq_mask_ack = ls1x_irq_mask_ack,
- .irq_unmask = ls1x_irq_unmask,
- .irq_set_type = ls1x_irq_settype,
-};
-
-static void ls1x_irq_dispatch(int n)
-{
- u32 int_status, irq;
-
- /* Get pending sources, masked by current enables */
- int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
- __raw_readl(LS1X_INTC_INTIEN(n));
-
- if (int_status) {
- irq = LS1X_IRQ(n, __ffs(int_status));
- do_IRQ(irq);
- }
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending;
-
- pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
- if (pending & CAUSEF_IP7)
- do_IRQ(TIMER_IRQ);
- else if (pending & CAUSEF_IP2)
- ls1x_irq_dispatch(0); /* INT0 */
- else if (pending & CAUSEF_IP3)
- ls1x_irq_dispatch(1); /* INT1 */
- else if (pending & CAUSEF_IP4)
- ls1x_irq_dispatch(2); /* INT2 */
- else if (pending & CAUSEF_IP5)
- ls1x_irq_dispatch(3); /* INT3 */
- else if (pending & CAUSEF_IP6)
- ls1x_irq_dispatch(4); /* INT4 */
- else
- spurious_interrupt();
-
-}
-
-static void __init ls1x_irq_init(int base)
-{
- int n;
-
- /* Disable interrupts and clear pending,
- * setup all IRQs as high level triggered
- */
- for (n = 0; n < INTN; n++) {
- __raw_writel(0x0, LS1X_INTC_INTIEN(n));
- __raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
- __raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
- /* set DMA0, DMA1 and DMA2 to edge trigger */
- __raw_writel(n ? 0x0 : 0xe000, LS1X_INTC_INTEDGE(n));
- }
-
-
- for (n = base; n < NR_IRQS; n++) {
- irq_set_chip_and_handler(n, &ls1x_irq_chip,
- handle_level_irq);
- }
-
- if (request_irq(INT0_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", INT0_IRQ);
- if (request_irq(INT1_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", INT1_IRQ);
- if (request_irq(INT2_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", INT2_IRQ);
- if (request_irq(INT3_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", INT3_IRQ);
-#if defined(CONFIG_LOONGSON1_LS1C)
- if (request_irq(INT4_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", INT4_IRQ);
-#endif
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
- ls1x_irq_init(LS1X_IRQ_BASE);
-}
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
deleted file mode 100644
index 623eb4bc7b41..000000000000
--- a/arch/mips/loongson32/common/platform.c
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-#include <linux/phy.h>
-#include <linux/serial_8250.h>
-#include <linux/stmmac.h>
-#include <linux/usb/ehci_pdriver.h>
-
-#include <platform.h>
-#include <loongson1.h>
-
-/* 8250/16550 compatible UART */
-#define LS1X_UART(_id) \
- { \
- .mapbase = LS1X_UART ## _id ## _BASE, \
- .irq = LS1X_UART ## _id ## _IRQ, \
- .iotype = UPIO_MEM, \
- .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
- .type = PORT_16550A, \
- }
-
-static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
- LS1X_UART(0),
- LS1X_UART(1),
- LS1X_UART(2),
- LS1X_UART(3),
- {},
-};
-
-struct platform_device ls1x_uart_pdev = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = ls1x_serial8250_pdata,
- },
-};
-
-void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
-{
- struct clk *clk;
- struct plat_serial8250_port *p;
-
- clk = clk_get(&pdev->dev, pdev->name);
- if (IS_ERR(clk)) {
- pr_err("unable to get %s clock, err=%ld",
- pdev->name, PTR_ERR(clk));
- return;
- }
- clk_prepare_enable(clk);
-
- for (p = pdev->dev.platform_data; p->flags != 0; ++p)
- p->uartclk = clk_get_rate(clk);
-}
-
-/* Synopsys Ethernet GMAC */
-static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
- .phy_mask = 0,
-};
-
-static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
- .pbl = 1,
-};
-
-int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
-{
- struct plat_stmmacenet_data *plat_dat = NULL;
- u32 val;
-
- val = __raw_readl(LS1X_MUX_CTRL1);
-
-#if defined(CONFIG_LOONGSON1_LS1B)
- plat_dat = dev_get_platdata(&pdev->dev);
- if (plat_dat->bus_id) {
- __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
- GMAC1_USE_UART0, LS1X_MUX_CTRL0);
- switch (plat_dat->phy_interface) {
- case PHY_INTERFACE_MODE_RGMII:
- val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
- break;
- case PHY_INTERFACE_MODE_MII:
- val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
- break;
- default:
- pr_err("unsupported mii mode %d\n",
- plat_dat->phy_interface);
- return -ENOTSUPP;
- }
- val &= ~GMAC1_SHUT;
- } else {
- switch (plat_dat->phy_interface) {
- case PHY_INTERFACE_MODE_RGMII:
- val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
- break;
- case PHY_INTERFACE_MODE_MII:
- val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
- break;
- default:
- pr_err("unsupported mii mode %d\n",
- plat_dat->phy_interface);
- return -ENOTSUPP;
- }
- val &= ~GMAC0_SHUT;
- }
- __raw_writel(val, LS1X_MUX_CTRL1);
-#elif defined(CONFIG_LOONGSON1_LS1C)
- plat_dat = dev_get_platdata(&pdev->dev);
-
- val &= ~PHY_INTF_SELI;
- if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
- val |= 0x4 << PHY_INTF_SELI_SHIFT;
- __raw_writel(val, LS1X_MUX_CTRL1);
-
- val = __raw_readl(LS1X_MUX_CTRL0);
- __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
-#endif
-
- return 0;
-}
-
-static struct plat_stmmacenet_data ls1x_eth0_pdata = {
- .bus_id = 0,
- .phy_addr = -1,
-#if defined(CONFIG_LOONGSON1_LS1B)
- .phy_interface = PHY_INTERFACE_MODE_MII,
-#elif defined(CONFIG_LOONGSON1_LS1C)
- .phy_interface = PHY_INTERFACE_MODE_RMII,
-#endif
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .rx_queues_to_use = 1,
- .tx_queues_to_use = 1,
- .init = ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth0_resources[] = {
- [0] = {
- .start = LS1X_GMAC0_BASE,
- .end = LS1X_GMAC0_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "macirq",
- .start = LS1X_GMAC0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device ls1x_eth0_pdev = {
- .name = "stmmaceth",
- .id = 0,
- .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
- .resource = ls1x_eth0_resources,
- .dev = {
- .platform_data = &ls1x_eth0_pdata,
- },
-};
-
-#ifdef CONFIG_LOONGSON1_LS1B
-static struct plat_stmmacenet_data ls1x_eth1_pdata = {
- .bus_id = 1,
- .phy_addr = -1,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .rx_queues_to_use = 1,
- .tx_queues_to_use = 1,
- .init = ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth1_resources[] = {
- [0] = {
- .start = LS1X_GMAC1_BASE,
- .end = LS1X_GMAC1_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "macirq",
- .start = LS1X_GMAC1_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device ls1x_eth1_pdev = {
- .name = "stmmaceth",
- .id = 1,
- .num_resources = ARRAY_SIZE(ls1x_eth1_resources),
- .resource = ls1x_eth1_resources,
- .dev = {
- .platform_data = &ls1x_eth1_pdata,
- },
-};
-#endif /* CONFIG_LOONGSON1_LS1B */
-
-/* GPIO */
-static struct resource ls1x_gpio0_resources[] = {
- [0] = {
- .start = LS1X_GPIO0_BASE,
- .end = LS1X_GPIO0_BASE + SZ_4 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device ls1x_gpio0_pdev = {
- .name = "ls1x-gpio",
- .id = 0,
- .num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
- .resource = ls1x_gpio0_resources,
-};
-
-static struct resource ls1x_gpio1_resources[] = {
- [0] = {
- .start = LS1X_GPIO1_BASE,
- .end = LS1X_GPIO1_BASE + SZ_4 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device ls1x_gpio1_pdev = {
- .name = "ls1x-gpio",
- .id = 1,
- .num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
- .resource = ls1x_gpio1_resources,
-};
-
-/* USB EHCI */
-static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ls1x_ehci_resources[] = {
- [0] = {
- .start = LS1X_EHCI_BASE,
- .end = LS1X_EHCI_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = LS1X_EHCI_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ehci_pdata ls1x_ehci_pdata = {
-};
-
-struct platform_device ls1x_ehci_pdev = {
- .name = "ehci-platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
- .resource = ls1x_ehci_resources,
- .dev = {
- .dma_mask = &ls1x_ehci_dmamask,
- .platform_data = &ls1x_ehci_pdata,
- },
-};
-
-/* Real Time Clock */
-struct platform_device ls1x_rtc_pdev = {
- .name = "ls1x-rtc",
- .id = -1,
-};
-
-/* Watchdog */
-static struct resource ls1x_wdt_resources[] = {
- {
- .start = LS1X_WDT_BASE,
- .end = LS1X_WDT_BASE + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device ls1x_wdt_pdev = {
- .name = "ls1x-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(ls1x_wdt_resources),
- .resource = ls1x_wdt_resources,
-};
diff --git a/arch/mips/loongson32/common/prom.c b/arch/mips/loongson32/common/prom.c
deleted file mode 100644
index fc580a22748e..000000000000
--- a/arch/mips/loongson32/common/prom.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Modified from arch/mips/pnx833x/common/prom.c.
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/serial_reg.h>
-#include <asm/fw/fw.h>
-
-#include <loongson1.h>
-
-unsigned long memsize;
-
-void __init prom_init(void)
-{
- void __iomem *uart_base;
-
- fw_init_cmdline();
-
- memsize = fw_getenvl("memsize");
- if(!memsize)
- memsize = DEFAULT_MEMSIZE;
-
- if (strstr(arcs_cmdline, "console=ttyS3"))
- uart_base = ioremap(LS1X_UART3_BASE, 0x0f);
- else if (strstr(arcs_cmdline, "console=ttyS2"))
- uart_base = ioremap(LS1X_UART2_BASE, 0x0f);
- else if (strstr(arcs_cmdline, "console=ttyS1"))
- uart_base = ioremap(LS1X_UART1_BASE, 0x0f);
- else
- uart_base = ioremap(LS1X_UART0_BASE, 0x0f);
- setup_8250_early_printk_port((unsigned long)uart_base, 0, 0);
-}
-
-void __init plat_mem_setup(void)
-{
- memblock_add(0x0, (memsize << 20));
-}
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
deleted file mode 100644
index 4733fe037176..000000000000
--- a/arch/mips/loongson32/common/setup.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/cpu-info.h>
-#include <asm/bootinfo.h>
-
-const char *get_system_type(void)
-{
- unsigned int processor_id = (¤t_cpu_data)->processor_id;
-
- switch (processor_id & PRID_REV_MASK) {
- case PRID_REV_LOONGSON1B:
-#if defined(CONFIG_LOONGSON1_LS1B)
- return "LOONGSON LS1B";
-#elif defined(CONFIG_LOONGSON1_LS1C)
- return "LOONGSON LS1C";
-#endif
- default:
- return "LOONGSON (unknown)";
- }
-}
diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
deleted file mode 100644
index 74ad2b17918d..000000000000
--- a/arch/mips/loongson32/common/time.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/clk.h>
-#include <linux/of_clk.h>
-#include <asm/time.h>
-
-void __init plat_time_init(void)
-{
- struct clk *clk = NULL;
-
- /* initialize LS1X clocks */
- of_clk_init(NULL);
-
- /* setup mips r4k timer */
- clk = clk_get(NULL, "cpu_clk");
- if (IS_ERR(clk))
- panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
-
- mips_hpt_frequency = clk_get_rate(clk) / 2;
-}
diff --git a/arch/mips/loongson32/ls1b/Makefile b/arch/mips/loongson32/ls1b/Makefile
deleted file mode 100644
index 33c574dc0f7f..000000000000
--- a/arch/mips/loongson32/ls1b/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1B based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
deleted file mode 100644
index fe115bdcb22c..000000000000
--- a/arch/mips/loongson32/ls1b/board.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/leds.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-
-#include <loongson1.h>
-#include <platform.h>
-
-static const struct gpio_led ls1x_gpio_leds[] __initconst = {
- {
- .name = "LED9",
- .default_trigger = "heartbeat",
- .gpio = 38,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "LED6",
- .default_trigger = "nand-disk",
- .gpio = 39,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
-};
-
-static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
- .num_leds = ARRAY_SIZE(ls1x_gpio_leds),
- .leds = ls1x_gpio_leds,
-};
-
-static struct platform_device *ls1b_platform_devices[] __initdata = {
- &ls1x_uart_pdev,
- &ls1x_eth0_pdev,
- &ls1x_eth1_pdev,
- &ls1x_ehci_pdev,
- &ls1x_gpio0_pdev,
- &ls1x_gpio1_pdev,
- &ls1x_rtc_pdev,
- &ls1x_wdt_pdev,
-};
-
-static int __init ls1b_platform_init(void)
-{
- ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-
- gpio_led_register_device(-1, &ls1x_led_pdata);
-
- return platform_add_devices(ls1b_platform_devices,
- ARRAY_SIZE(ls1b_platform_devices));
-}
-
-arch_initcall(ls1b_platform_init);
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
deleted file mode 100644
index 1cf3aa264d55..000000000000
--- a/arch/mips/loongson32/ls1c/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1C based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
deleted file mode 100644
index 9dcfe9de55b0..000000000000
--- a/arch/mips/loongson32/ls1c/board.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
- */
-
-#include <platform.h>
-
-static struct platform_device *ls1c_platform_devices[] __initdata = {
- &ls1x_uart_pdev,
- &ls1x_eth0_pdev,
- &ls1x_rtc_pdev,
- &ls1x_wdt_pdev,
-};
-
-static int __init ls1c_platform_init(void)
-{
- ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-
- return platform_add_devices(ls1c_platform_devices,
- ARRAY_SIZE(ls1c_platform_devices));
-}
-
-arch_initcall(ls1c_platform_init);
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 8/9] MIPS: Unify Loongson1 PRID_REV
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
` (6 preceding siblings ...)
2025-07-16 11:25 ` [PATCH v3 7/9] MIPS: loongson32: Switch to generic core Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 9/9] MIPS: configs: Consolidate Loongson1 defconfigs Keguang Zhang via B4 Relay
2025-08-29 10:20 ` [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Thomas Bogendoerfer
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel, Philippe Mathieu-Daudé
From: Keguang Zhang <keguang.zhang@gmail.com>
LS1B and LS1C share the same PRID value, so unify them
into a single definition: PRID_REV_LOONGSON1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
arch/mips/include/asm/cpu.h | 3 +--
arch/mips/kernel/cpu-probe.c | 6 +++---
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index ecb9854cb432..4163b22c0a9a 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -248,8 +248,7 @@
#define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */
#define PRID_REV_VR4130 0x0080
#define PRID_REV_34K_V1_0_2 0x0022
-#define PRID_REV_LOONGSON1B 0x0020
-#define PRID_REV_LOONGSON1C 0x0020 /* Same as Loongson-1B */
+#define PRID_REV_LOONGSON1 0x0020
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
#define PRID_REV_LOONGSON2K_R1_0 0x0000
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index af7412549e6e..ca1ab765d4ac 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1286,14 +1286,14 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID);
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
break;
- case PRID_IMP_LOONGSON_32: /* Loongson-1 */
+ case PRID_IMP_LOONGSON_32:
decode_configs(c);
c->cputype = CPU_LOONGSON32;
switch (c->processor_id & PRID_REV_MASK) {
- case PRID_REV_LOONGSON1B:
- __cpu_name[cpu] = "Loongson 1B";
+ case PRID_REV_LOONGSON1:
+ __cpu_name[cpu] = "ICT Loongson-1";
break;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v3 9/9] MIPS: configs: Consolidate Loongson1 defconfigs
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
` (7 preceding siblings ...)
2025-07-16 11:25 ` [PATCH v3 8/9] MIPS: Unify Loongson1 PRID_REV Keguang Zhang via B4 Relay
@ 2025-07-16 11:25 ` Keguang Zhang via B4 Relay
2025-08-29 10:20 ` [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Thomas Bogendoerfer
9 siblings, 0 replies; 11+ messages in thread
From: Keguang Zhang via B4 Relay @ 2025-07-16 11:25 UTC (permalink / raw)
To: Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jiaxun Yang, Keguang Zhang
Cc: linux-mips, devicetree, linux-kernel
From: Keguang Zhang <keguang.zhang@gmail.com>
Unify loongson{1b,1c}_defconfig into a single loongson1_defconfig.
Enable the following options by default:
- CONFIG_SERIAL_OF_PLATFORM
- CONFIG_RTC_DRV_LOONGSON
- CONFIG_LOONGSON1_APB_DMA
- CONFIG_MTD_NAND_LOONGSON1
- CONFIG_SND_LOONGSON1_AC97
Also disable unnecessary options.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
MAINTAINERS | 1 +
.../{loongson1b_defconfig => loongson1_defconfig} | 94 +++++++++++++---
arch/mips/configs/loongson1c_defconfig | 121 ---------------------
3 files changed, 78 insertions(+), 138 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index d42a83656879..c73e25af147c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16684,6 +16684,7 @@ L: linux-mips@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/*/loongson,ls1*.yaml
F: arch/mips/boot/dts/loongson/loongson1*
+F: arch/mips/configs/loongson1_defconfig
F: arch/mips/loongson32/
F: drivers/*/*loongson1*
F: drivers/mtd/nand/raw/loongson1-nand-controller.c
diff --git a/arch/mips/configs/loongson1b_defconfig b/arch/mips/configs/loongson1_defconfig
similarity index 51%
rename from arch/mips/configs/loongson1b_defconfig
rename to arch/mips/configs/loongson1_defconfig
index 68207b31dc20..81acae6f61c8 100644
--- a/arch/mips/configs/loongson1b_defconfig
+++ b/arch/mips/configs/loongson1_defconfig
@@ -1,7 +1,6 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_XZ=y
CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -12,15 +11,16 @@ CONFIG_NAMESPACES=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EXPERT=y
CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_MACH_LOONGSON32=y
-# CONFIG_SECCOMP is not set
# CONFIG_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_GCC_PLUGINS is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -31,6 +31,7 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
+# CONFIG_ETHTOOL_NETLINK is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
@@ -38,32 +39,75 @@ CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_LOONGSON1=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
+# CONFIG_NET_VENDOR_CAVIUM is not set
+# CONFIG_NET_VENDOR_CORTINA is not set
+# CONFIG_NET_VENDOR_DAVICOM is not set
+# CONFIG_NET_VENDOR_ENGLEDER is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_FUNGIBLE is not set
+# CONFIG_NET_VENDOR_GOOGLE is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_META is not set
# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_MICROSOFT is not set
+# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_PENSANDO is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_SOCIONEXT is not set
CONFIG_STMMAC_ETH=y
+# CONFIG_DWMAC_GENERIC is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_VERTEXCOM is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_REALTEK_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+# CONFIG_VT_CONSOLE is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_LEGACY_PTY_COUNT=8
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
+# CONFIG_PTP_1588_CLOCK is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_LOONGSON1=y
# CONFIG_HWMON is not set
@@ -71,7 +115,15 @@ CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_SYSFS=y
CONFIG_LOONGSON1_WDT=y
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_LOONGSON1_AC97=y
+CONFIG_SND_SIMPLE_CARD=y
CONFIG_HID_GENERIC=m
CONFIG_USB_HID=m
CONFIG_USB=y
@@ -86,17 +138,20 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_LOONGSON1=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_LOONGSON=y
+CONFIG_DMADEVICES=y
+CONFIG_LOONGSON1_APB_DMA=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_NVMEM is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
@@ -105,16 +160,21 @@ CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_ATIME_SUPPORT=y
+# CONFIG_UBIFS_FS_SECURITY is not set
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
-# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_ARM64 is not set
+# CONFIG_XZ_DEC_SPARC is not set
+# CONFIG_XZ_DEC_RISCV is not set
CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_MISC is not set
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
# CONFIG_EARLY_PRINTK is not set
diff --git a/arch/mips/configs/loongson1c_defconfig b/arch/mips/configs/loongson1c_defconfig
deleted file mode 100644
index c3910a9dee9e..000000000000
--- a/arch/mips/configs/loongson1c_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_XZ=y
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EXPERT=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MACH_LOONGSON32=y
-CONFIG_LOONGSON1_LS1C=y
-# CONFIG_SECCOMP is not set
-# CONFIG_SUSPEND is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-CONFIG_STMMAC_ETH=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=8
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_LOONGSON1=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WATCHDOG_SYSFS=y
-CONFIG_LOONGSON1_WDT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_HID_GENERIC=m
-CONFIG_USB_HID=m
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_LOONGSON1=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_ATIME_SUPPORT=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
` (8 preceding siblings ...)
2025-07-16 11:25 ` [PATCH v3 9/9] MIPS: configs: Consolidate Loongson1 defconfigs Keguang Zhang via B4 Relay
@ 2025-08-29 10:20 ` Thomas Bogendoerfer
9 siblings, 0 replies; 11+ messages in thread
From: Thomas Bogendoerfer @ 2025-08-29 10:20 UTC (permalink / raw)
To: keguang.zhang
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Jiaxun Yang,
linux-mips, devicetree, linux-kernel, Krzysztof Kozlowski,
Philippe Mathieu-Daudé
On Wed, Jul 16, 2025 at 07:25:09PM +0800, Keguang Zhang via B4 Relay wrote:
> Convert all platform devices to Device Tree.
> Remove all obsolete platform device code.
> Switch to the generic MIPS core.
> Add built-in DTB support.
> Update Kconfig and Makefile accordingly.
> Update and rename the defconfig.
>
> Changes in v3:
> - Squash two previous changes that documented DT bindings for the
> LS1B-DEMO and CQ-T300B into a single patch.
> - Separate the built-in DTB support into a single patch.
> - Move the timer node under the APB bus.
> - Remove redundant console bootargs since it is covered by stdout-path.
> - Replace mtdparts bootargs with a "partitions" node.
> - Link to v2: https://lore.kernel.org/r/20250709-loongson1-arch-v2-0-bcff6e518c09@gmail.com
>
> Changes in v2:
> - Document two new boards: loongson,ls1b-demo and loongson,cq-t300b.
> - Submit complete DTS files for each board.
> - Switch to the generic MIPS kernel.
> - Consolidate Loongson1 defconfigs.
> - Link to v1: https://lore.kernel.org/all/20230729134318.1694467-1-keguang.zhang@gmail.com/
>
> ---
> Keguang Zhang (9):
> dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B
> MIPS: dts: loongson: Add LS1B-DEMO board
> MIPS: dts: loongson: Add LSGZ_1B_DEV board
> MIPS: dts: loongson: Add Smartloong-1C board
> MIPS: dts: loongson: Add CQ-T300B board
> MIPS: loongson: Add built-in DTB support
> MIPS: loongson32: Switch to generic core
> MIPS: Unify Loongson1 PRID_REV
> MIPS: configs: Consolidate Loongson1 defconfigs
>
> .../devicetree/bindings/mips/loongson/devices.yaml | 2 +
> MAINTAINERS | 3 +-
> arch/mips/Kconfig | 64 ++---
> arch/mips/boot/dts/Makefile | 1 +
> arch/mips/boot/dts/loongson/Makefile | 10 +
> arch/mips/boot/dts/loongson/cq-t300b.dts | 110 ++++++++
> arch/mips/boot/dts/loongson/loongson1.dtsi | 136 ++++++++++
> arch/mips/boot/dts/loongson/loongson1b.dtsi | 198 ++++++++++++++
> arch/mips/boot/dts/loongson/loongson1c.dtsi | 141 ++++++++++
> arch/mips/boot/dts/loongson/ls1b-demo.dts | 125 +++++++++
> arch/mips/boot/dts/loongson/lsgz_1b_dev.dts | 162 ++++++++++++
> arch/mips/boot/dts/loongson/smartloong-1c.dts | 110 ++++++++
> .../{loongson1b_defconfig => loongson1_defconfig} | 94 +++++--
> arch/mips/configs/loongson1c_defconfig | 121 ---------
> arch/mips/include/asm/cpu-type.h | 3 +-
> arch/mips/include/asm/cpu.h | 3 +-
> arch/mips/include/asm/mach-loongson32/irq.h | 107 --------
> arch/mips/include/asm/mach-loongson32/loongson1.h | 50 ----
> arch/mips/include/asm/mach-loongson32/platform.h | 23 --
> arch/mips/include/asm/mach-loongson32/regs-mux.h | 124 ---------
> arch/mips/kernel/cpu-probe.c | 6 +-
> arch/mips/loongson32/Kconfig | 43 +---
> arch/mips/loongson32/Makefile | 17 --
> arch/mips/loongson32/Platform | 1 -
> arch/mips/loongson32/common/Makefile | 6 -
> arch/mips/loongson32/common/irq.c | 191 --------------
> arch/mips/loongson32/common/platform.c | 285 ---------------------
> arch/mips/loongson32/common/prom.c | 42 ---
> arch/mips/loongson32/common/setup.c | 26 --
> arch/mips/loongson32/common/time.c | 23 --
> arch/mips/loongson32/ls1b/Makefile | 6 -
> arch/mips/loongson32/ls1b/board.c | 55 ----
> arch/mips/loongson32/ls1c/Makefile | 6 -
> arch/mips/loongson32/ls1c/board.c | 23 --
> 34 files changed, 1118 insertions(+), 1199 deletions(-)
> ---
> base-commit: b5a1f9870f9828bd6625d6c946c66be4983d56f6
> change-id: 20250414-loongson1-arch-5ea8ced4c9a9
series applied to mips-next.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2025-08-29 10:31 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-07-16 11:25 [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 1/9] dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 2/9] MIPS: dts: loongson: Add LS1B-DEMO board Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 3/9] MIPS: dts: loongson: Add LSGZ_1B_DEV board Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 4/9] MIPS: dts: loongson: Add Smartloong-1C board Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 5/9] MIPS: dts: loongson: Add CQ-T300B board Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 6/9] MIPS: loongson: Add built-in DTB support Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 7/9] MIPS: loongson32: Switch to generic core Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 8/9] MIPS: Unify Loongson1 PRID_REV Keguang Zhang via B4 Relay
2025-07-16 11:25 ` [PATCH v3 9/9] MIPS: configs: Consolidate Loongson1 defconfigs Keguang Zhang via B4 Relay
2025-08-29 10:20 ` [PATCH v3 0/9] MIPS: loongson32: Convert all platform devices to DT Thomas Bogendoerfer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).