[GIT PULL] MIPS changes for v7.1

[Thomas Bogendoerfer <tsbogend@alpha.franken.de>]

The following changes since commit 591cd656a1bf5ea94a222af5ef2ee76df029c1d2:

  Linux 7.0-rc7 (2026-04-05 15:26:23 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/ tags/mips_7.1

for you to fetch changes up to 15513eefac7ca68602e9de9853f5e671bf7b4eef:

  MIPS/mtd: Handle READY GPIO in generic NAND platform data (2026-04-13 15:41:56 +0200)

----------------------------------------------------------------
Support for Mobileye EyeQ6Lplus
Cleanups and fixes

----------------------------------------------------------------
Andy Shevchenko (1):
      MIPS: Alchemy: Remove unused forward declaration

Benoît Monin (13):
      dt-bindings: mips: Add Mobileye EyeQ6Lplus SoC
      dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB
      MIPS: Add Mobileye EyeQ6Lplus support
      reset: eyeq: Add Mobileye EyeQ6Lplus OLB
      pinctrl: eyeq5: Use match data
      pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB
      clk: eyeq: Skip post-divisor when computing PLL frequency
      clk: eyeq: Adjust PLL accuracy computation
      clk: eyeq: Add Mobileye EyeQ6Lplus OLB
      MIPS: Add Mobileye EyeQ6Lplus SoC dtsi
      MIPS: Add Mobileye EyeQ6Lplus evaluation board dts
      MIPS: config: add eyeq6lplus_defconfig
      MAINTAINERS: Mobileye: Add EyeQ6Lplus files

Caleb James DeLisle (1):
      mips: dts: Add PCIe to EcoNet EN751221

Linus Walleij (2):
      MIPS/input: Move RB532 button to GPIO descriptors
      MIPS/mtd: Handle READY GPIO in generic NAND platform data

Maciej W. Rozycki (4):
      MIPS: kernel: Remove $0 clobber from `mult_sh_align_mod'
      MIPS: DEC: Rate-limit memory errors for ECC systems
      MIPS: DEC: Rate-limit memory errors for KN01 systems
      MIPS: DEC: Rate-limit memory errors for non-KN01 parity systems

Pengpeng Hou (1):
      MIPS: validate DT bootargs before appending them

Rong Zhang (1):
      MIPS: dts: loongson64g-package: Switch to Loongson UART driver

Shiji Yang (3):
      mips: pci-mt7620: fix bridge register access
      mips: pci-mt7620: add more register init values
      mips: pci-mt7620: rework initialization procedure

Thomas Zimmermann (1):
      arch/mips: Drop CONFIG_FIRMWARE_EDID from defconfig files

Théo Lebrun (3):
      dt-bindings: soc: mobileye: OLB is an Ethernet PHY provider on EyeQ5
      MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers
      MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs

 .../devicetree/bindings/mips/mobileye.yaml         |   5 +
 .../bindings/soc/mobileye/mobileye,eyeq5-olb.yaml  |   7 +-
 .../soc/mobileye/mobileye,eyeq6lplus-olb.yaml      | 208 ++++++++++
 MAINTAINERS                                        |   4 +-
 arch/mips/boot/dts/econet/en751221.dtsi            | 114 ++++++
 .../dts/econet/en751221_smartfiber_xp8421-b.dts    |  21 +
 .../boot/dts/loongson/loongson64g-package.dtsi     |   4 +-
 arch/mips/boot/dts/mobileye/Makefile               |   1 +
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts         |  26 ++
 arch/mips/boot/dts/mobileye/eyeq5.dtsi             |  45 +++
 arch/mips/boot/dts/mobileye/eyeq6lplus-epm6.dts    | 103 +++++
 arch/mips/boot/dts/mobileye/eyeq6lplus-pins.dtsi   |  84 ++++
 arch/mips/boot/dts/mobileye/eyeq6lplus.dtsi        | 170 ++++++++
 arch/mips/configs/eyeq6lplus_defconfig             | 117 ++++++
 arch/mips/configs/ip32_defconfig                   |   1 -
 arch/mips/configs/lemote2f_defconfig               |   1 -
 arch/mips/configs/malta_qemu_32r6_defconfig        |   1 -
 arch/mips/configs/maltaaprp_defconfig              |   1 -
 arch/mips/configs/maltasmvp_defconfig              |   1 -
 arch/mips/configs/maltasmvp_eva_defconfig          |   1 -
 arch/mips/configs/maltaup_defconfig                |   1 -
 arch/mips/dec/ecc-berr.c                           |  16 +-
 arch/mips/dec/kn01-berr.c                          |   6 +-
 arch/mips/dec/kn02xa-berr.c                        |  26 +-
 arch/mips/econet/Kconfig                           |   2 +
 arch/mips/include/asm/mach-au1x00/gpio-au1000.h    |   2 -
 arch/mips/include/asm/mach-au1x00/gpio-au1300.h    |   1 -
 arch/mips/kernel/r4k-bugs64.c                      |   2 +-
 arch/mips/kernel/setup.c                           |   4 +
 arch/mips/mobileye/Kconfig                         |   3 +
 arch/mips/mobileye/Platform                        |   1 +
 arch/mips/pci/pci-mt7620.c                         | 110 ++++--
 arch/mips/rb532/devices.c                          |  83 ++--
 drivers/clk/Kconfig                                |   4 +-
 drivers/clk/clk-eyeq.c                             |  90 ++++-
 drivers/input/misc/rb532_button.c                  |  35 +-
 drivers/mtd/nand/raw/plat_nand.c                   |  24 +-
 drivers/pinctrl/Kconfig                            |   4 +-
 drivers/pinctrl/pinctrl-eyeq5.c                    | 439 +++++++++++++++------
 drivers/reset/Kconfig                              |   4 +-
 drivers/reset/reset-eyeq.c                         |  31 ++
 .../dt-bindings/clock/mobileye,eyeq6lplus-clk.h    |  37 ++
 42 files changed, 1591 insertions(+), 249 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq6lplus-olb.yaml
 create mode 100644 arch/mips/boot/dts/mobileye/eyeq6lplus-epm6.dts
 create mode 100644 arch/mips/boot/dts/mobileye/eyeq6lplus-pins.dtsi
 create mode 100644 arch/mips/boot/dts/mobileye/eyeq6lplus.dtsi
 create mode 100644 arch/mips/configs/eyeq6lplus_defconfig
 create mode 100644 include/dt-bindings/clock/mobileye,eyeq6lplus-clk.h

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]