From: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org, ralf@linux-mips.org
Subject: [PATCH 0/4] MIPS: Support for Netlogic XLP processors.
Date: Sat, 30 Jul 2011 18:57:48 +0530 [thread overview]
Message-ID: <cover.1312024106.git.jayachandranc@netlogicmicro.com> (raw)
This patchset adds support for Netlogic's new XLP processor series.
http://netlogicmicro.com/Products/ProductBriefs/MultiCore/XLP832.htm
has more details on this processor, but here's a short blurb:
8-core, 4-way multi-threaded, MIPS64r2 CPUs with quad-issue out-of-order
execution. Cache-coherent, 32KB D-cache & 64KB I-cache per core, 4MB L2 cache,
8MB L3 cache. Floating point support. On-chip devices include DDR3 DRAM
controller, 40 GBps network accelerator, security accelerator, compression
engine, PCI, USB, I2C, UART, Flash, GPIO and so on. Inter-chip
interconnect allows upto 4 chips to be connected into a 128 cpu system.
The changes here has the platform support with UART, PIC and 32-way SMP.
Comments on the code and suggestions are very welcome.
Thanks,
JC.
Jayachandran C (4):
MIPS: Netlogic: XLP CPU support.
MIPS: Netlogic: Platform files for XLP processors.
MIPS: Netlogic: Build support for netlogic XLP
MIPS: Netlogic: Add default XLP config.
arch/mips/Kconfig | 44 ++
arch/mips/configs/nlm_xlp_defconfig | 590 ++++++++++++++++++++
arch/mips/include/asm/cpu.h | 3 +-
.../asm/mach-netlogic/cpu-feature-overrides.h | 18 +-
arch/mips/include/asm/module.h | 2 +
arch/mips/include/asm/netlogic/xlp-hal/bridge.h | 187 +++++++
arch/mips/include/asm/netlogic/xlp-hal/cop2.h | 319 +++++++++++
.../mips/include/asm/netlogic/xlp-hal/cpucontrol.h | 71 +++
arch/mips/include/asm/netlogic/xlp-hal/iomap.h | 133 +++++
arch/mips/include/asm/netlogic/xlp-hal/mmio.h | 441 +++++++++++++++
arch/mips/include/asm/netlogic/xlp-hal/pic.h | 339 +++++++++++
arch/mips/include/asm/netlogic/xlp-hal/sys.h | 128 +++++
arch/mips/include/asm/netlogic/xlp-hal/uart.h | 191 +++++++
arch/mips/include/asm/netlogic/xlp-hal/xlp.h | 68 +++
arch/mips/kernel/Makefile | 1 +
arch/mips/kernel/cpu-probe.c | 19 +-
arch/mips/lib/Makefile | 1 +
arch/mips/mm/Makefile | 1 +
arch/mips/mm/c-r4k.c | 4 +
arch/mips/mm/tlbex.c | 1 +
arch/mips/netlogic/Kconfig | 3 +
arch/mips/netlogic/Platform | 7 +
arch/mips/netlogic/xlp/Makefile | 5 +
arch/mips/netlogic/xlp/irq.c | 240 ++++++++
arch/mips/netlogic/xlp/nlm_hal.c | 84 +++
arch/mips/netlogic/xlp/platform.c | 107 ++++
arch/mips/netlogic/xlp/setup.c | 98 ++++
arch/mips/netlogic/xlp/smp.c | 286 ++++++++++
arch/mips/netlogic/xlp/smpboot.S | 217 +++++++
arch/mips/netlogic/xlp/time.c | 74 +++
arch/mips/netlogic/xlp/xlp_console.c | 49 ++
31 files changed, 3723 insertions(+), 8 deletions(-)
create mode 100644 arch/mips/configs/nlm_xlp_defconfig
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/bridge.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/cop2.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/iomap.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/mmio.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/pic.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/sys.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/uart.h
create mode 100644 arch/mips/include/asm/netlogic/xlp-hal/xlp.h
create mode 100644 arch/mips/netlogic/xlp/Makefile
create mode 100644 arch/mips/netlogic/xlp/irq.c
create mode 100644 arch/mips/netlogic/xlp/nlm_hal.c
create mode 100644 arch/mips/netlogic/xlp/platform.c
create mode 100644 arch/mips/netlogic/xlp/setup.c
create mode 100644 arch/mips/netlogic/xlp/smp.c
create mode 100644 arch/mips/netlogic/xlp/smpboot.S
create mode 100644 arch/mips/netlogic/xlp/time.c
create mode 100644 arch/mips/netlogic/xlp/xlp_console.c
--
1.7.4.1
next reply other threads:[~2011-07-30 13:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-30 13:27 Jayachandran C [this message]
2011-07-30 13:28 ` [PATCH 1/4] MIPS: Netlogic: XLP CPU support Jayachandran C
2011-08-23 12:46 ` Ralf Baechle
2011-08-24 9:36 ` Jayachandran C.
2011-07-30 13:28 ` [PATCH 2/4] MIPS: Netlogic: Platform files for XLP processors Jayachandran C
2011-08-23 16:41 ` Ralf Baechle
2011-08-24 8:54 ` Jayachandran C.
2011-07-30 13:28 ` [PATCH 3/4] MIPS: Netlogic: Build support for netlogic XLP Jayachandran C
2011-07-30 13:29 ` [PATCH 4/4] MIPS: Netlogic: Add default XLP config Jayachandran C
-- strict thread matches above, loose matches on Subject: below --
2011-09-04 18:10 [PATCH 0/4] MIPS: Support for Netlogic XLP processors Jayachandran C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1312024106.git.jayachandranc@netlogicmicro.com \
--to=jayachandranc@netlogicmicro.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox