[PATCH 0/6] MIPS: OCTEON: Remove redundant AER code

[Naveen Naidu <naveennaidu479@gmail.com>]

e8635b484f64 ("MIPS: Add Cavium OCTEON PCI support.") added MIPS
specific code to enable PCIe and AER error reporting (*irrespective
of CONFIG_PCIEAER value*) because PCI core didn't do that at the time.

But currently, the PCI core clears and enables the AER status registers.
So it's redundant for octeon code to do so. This patch series removes
the redundant code from the pci-octeon.c

Currently, the correctable and uncorrectable AER mask registers are not
set to their default value when AER service driver is loaded. This
defect is also fixed in the "[PATCH 1/6]" in the series.

Please note that "Patch 4/6" is dependent on "Patch 1/6".

Thanks,
Naveen Naidu

Naveen Naidu (6):
 [PATCH 1/6] PCI/AER: Enable COR/UNCOR error reporting in set_device_error_reporting()
 [PATCH 2/6] MIPS: OCTEON: Remove redundant clearing of AER status registers
 [PATCH 3/6] MIPS: OCTEON: Remove redundant enable of PCIe normal error reporting
 [PATCH 4/6] MIPS: OCTEON: Remove redundant enable of COR/UNCOR error
 [PATCH 5/6] MIPS: OCTEON: Remove redundant ECRC Generation Enable
 [PATCH 6/6] MIPS: OCTEON: Remove redundant enable of RP error reporting

 arch/mips/pci/pci-octeon.c | 50 --------------------------------------
 drivers/pci/pcie/aer.c     | 13 +++++++++-
 2 files changed, 12 insertions(+), 51 deletions(-)

-- 
2.25.1