[PATCH v3 0/3] Add dependencies of POWER_RESET for MIPS Malta

[PATCH v3 0/3] Add dependencies of POWER_RESET for MIPS Malta

[Yuan Tan]

These patches are to add dependencies of POWER_RESET for MIPS Malta.

As I have to use "savedefconfig" on the latest branch of different
architectures, I am sending separate patches for each architecture in v3.

To simplify the enablement of the poweroff support, selecting the
required options for CONFIG_POWER_RESET=y may make many people happy
especially when they are using a customized config (maybe tinyconfig
based) for a target qemu board. Without normal poweroff support from the
kernel side, qemu will simply hang[1] there after a 'poweroff' command,
which is a very bad experience for the automatical tests.

However, CONFIG_POWER_RESET is ineffective if there are no
dependencies that enable certain devices in Kconfig.

Currently, based on tinyconfig, it is very hard to find the exact
poweroff related option[2]. Some architectures' poweroff works well without
any dependence, the others' poweroff options are hidden deeply, which
make things hard.

After multiple verifications, these options have been identified as the
minimum dependencies required for poweroff to function normally.
Additionally, 'make savedefconfig' simplifies the defconfig
automatically.

Zhangjin and I invested a significant amount of time in searching for
the current options on these devices. We hope that this set of patches
will save time for others. If community like it, we will consider adding
dependencies for POWER_RESET on other devices.

We hope every device's CONFIG_POWER_RESET will have proper dependencies. :)

---
[1]: https://lore.kernel.org/lkml/511b2f6009fb830b3f32b4be3dca99596c684fa3.1689759351.git.falcon@tinylab.org/
[2]: https://lore.kernel.org/all/983843582e52e83fba79ad45cea6c79e1f62ec6c.1690489039.git.falcon@tinylab.org/

v1: https://lore.kernel.org/all/20230831201727.3177853-1-tanyuan@tinylab.org/
v2: https://lore.kernel.org/all/cover.1693535514.git.tanyuan@tinylab.org/

---
Changes in v2:
- Fix the mistake of using spaces instead of tabs in kconfig.

Changes in v3:
- Enable POWER_RESET and simplify the deconfig.
- Select ADB_CUDA in PPC_PMAC32 only.

Yuan Tan (3):
  MIPS: Cleanup malta_defconfig
  Kconfig: add dependencies of POWER_RESET for mips malta
  MIPS: Simplify malta_defconfig

 arch/mips/Kconfig                 |  3 +++
 arch/mips/configs/malta_defconfig | 39 ++++++-------------------------
 2 files changed, 10 insertions(+), 32 deletions(-)


base-commit: e7513eccb7d7f82e28f4730210b42da71edaa6a6
-- 
2.34.1

[PATCH v3 1/3] MIPS: Cleanup malta_defconfig

[Yuan Tan]

Use 'make savedefconfig' to cleanup malta_defconfig.

Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
---
 arch/mips/configs/malta_defconfig | 39 +++++++------------------------
 1 file changed, 8 insertions(+), 31 deletions(-)

diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index ae1a7793e810..7ae07d57b79a 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -6,18 +6,17 @@ CONFIG_NAMESPACES=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_MIPS_MALTA=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_PAGE_SIZE_16KB=y
 CONFIG_NR_CPUS=8
 CONFIG_HZ_100=y
-CONFIG_PCI=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -133,19 +132,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -177,7 +163,6 @@ CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_PHONET=m
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
@@ -186,16 +171,12 @@ CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
 CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_FLOW=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
@@ -211,6 +192,7 @@ CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_MESH=y
 CONFIG_RFKILL=m
+CONFIG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
@@ -220,7 +202,6 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -396,20 +377,16 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
-- 
2.34.1

Re: [PATCH v3 1/3] MIPS: Cleanup malta_defconfig

[Philippe Mathieu-Daudé]

On 14/9/23 10:43, Yuan Tan wrote:
> Use 'make savedefconfig' to cleanup malta_defconfig.
> 
> Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
> ---
>   arch/mips/configs/malta_defconfig | 39 +++++++------------------------
>   1 file changed, 8 insertions(+), 31 deletions(-)

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

[PATCH v3 2/3] Kconfig: add dependencies of POWER_RESET for mips malta

[Yuan Tan]

MIPS Malta's power off depends on PCI, PCI_QUIRKS, and
POWER_RESET_PIIX4_POWEROFF to work. Enable them when POWER_RESET is set
for convenience.

Suggested-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
---
 arch/mips/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index fc6fba925aea..b63a93e39f23 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -547,6 +547,9 @@ config MIPS_MALTA
 	select MIPS_L1_CACHE_SHIFT_6
 	select MIPS_MSC
 	select PCI_GT64XXX_PCI0
+	select PCI if POWER_RESET
+	select PCI_QUIRKS if POWER_RESET
+	select POWER_RESET_PIIX4_POWEROFF if POWER_RESET
 	select SMP_UP if SMP
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
-- 
2.34.1

[PATCH v3 3/3] MIPS: Simplify malta_defconfig

[Yuan Tan]

Simplify malta_defconfig with POWER_RESET dependences.

Regenerate malta_defconfig with 'make savedefconfig'.

Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
---
 arch/mips/configs/malta_defconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 7ae07d57b79a..99049e993192 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -192,7 +192,6 @@ CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_MESH=y
 CONFIG_RFKILL=m
-CONFIG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
@@ -284,7 +283,6 @@ CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-- 
2.34.1

Re: [PATCH v3 3/3] MIPS: Simplify malta_defconfig

[Philippe Mathieu-Daudé]

On 14/9/23 10:44, Yuan Tan wrote:
> Simplify malta_defconfig with POWER_RESET dependences.
> 
> Regenerate malta_defconfig with 'make savedefconfig'.
> 
> Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
> ---
>   arch/mips/configs/malta_defconfig | 2 --
>   1 file changed, 2 deletions(-)
> 
> diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
> index 7ae07d57b79a..99049e993192 100644
> --- a/arch/mips/configs/malta_defconfig
> +++ b/arch/mips/configs/malta_defconfig
> @@ -192,7 +192,6 @@ CONFIG_CFG80211=m
>   CONFIG_MAC80211=m
>   CONFIG_MAC80211_MESH=y
>   CONFIG_RFKILL=m
> -CONFIG_PCI=y
>   CONFIG_DEVTMPFS=y
>   CONFIG_CONNECTOR=m
>   CONFIG_MTD=y
> @@ -284,7 +283,6 @@ CONFIG_MOUSE_PS2_ELANTECH=y
>   CONFIG_SERIAL_8250=y
>   CONFIG_SERIAL_8250_CONSOLE=y
>   CONFIG_POWER_RESET=y
> -CONFIG_POWER_RESET_PIIX4_POWEROFF=y
>   CONFIG_POWER_RESET_SYSCON=y
>   # CONFIG_HWMON is not set
>   CONFIG_FB=y

IMHO this should be squashed with the previous patch,
to keep it "atomic", easing reverts or cherry-picks
during backports.

Re: [PATCH v3 3/3] MIPS: Simplify malta_defconfig

[Yuan Tan]

On 9/15/2023 9:35 PM, Philippe Mathieu-Daudé wrote:
> IMHO this should be squashed with the previous patch,
> to keep it "atomic", easing reverts or cherry-picks
> during backports.
Oh I will send v4 to squash these two patches :)