Re: broken ip27 kernel

[David Cummings <real.psyence@gmail.com>]

Ok, the patch difficulty was my fault. With latest cvs source and the
20050703.diff applied, I can build a kernel, arcload and arcs itself
can both load said kernel, but I receive no output on the console. If
I drop out to a MSC console, it is in one of either POD MSC Dex or Unc
depending on kernel(and time perhaps?). I feel like I am missing
something, like console support or something. Thanks again...

On 7/6/05, David Cummings <real.psyence@gmail.com> wrote:
> I can boot your kernel, Ilya, just fine. I'd really like it to be able
> to boot from sda1, so my config takes out nfsroot. I am using the
> newest checkout from cvs, but I am having trouble applying your diff.
> Either the Makefile and others have changed dramatically, or I am
> using an incorrect command to patch. Thanks for any info,
> -Dave
> 
> On 7/6/05, Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com> wrote:
> > http://www.total-knowledge.com/progs/mips/kernels
> > contains compiled kernel as of few days ago, as well as diff I used.
> > It runs just fin on my Origin2000 and was reported to run on O200 as well.
> >
> > David Cummings wrote:
> >
> > >Hello all,
> > >   I have recently compiled kernel from cvs-source that will load from
> > >arcload, but after "Entering Kernel" the machine hangs and the MSC
> > >appears to be in a POD dex mode. I would  like to know if anyone is
> > >familiar with this and if it's just a patch I'm missing or something.
> > >Thanks
> > >-Dave
> > >
> > >
> >
> > --
> > Ilya A. Volynets-Evenbakh
> > Total Knowledge. CTO
> > http://www.total-knowledge.com
> >
> >
> 
> 
> --
> The way that can be named is not the Way.
> 


-- 
The way that can be named is not the Way.