From: Jeff Coffin <jcoffin@sv.usweb.com>
To: ulfc@thepuffingroup.com
Cc: linux@cthulhu.engr.sgi.com
Subject: RE: Yet Closer
Date: 01 May 1999 16:40:54 -0700 [thread overview]
Message-ID: <m3n1zouznd.fsf@chuck.sv.usweb.com> (raw)
> Don't you see anything at all, or does it hang after freeing PROM
> memory? There was a problem with the PROM memory freeing on newer
> PROM's, which Thomas recently solved. I don't think he has uploaded
> a new kernel since then..
> I can probably upload a new one if this is your problem.
I think it's something else. Here's what I get (this is from ralf's
suggestion, didn't quite work for me) :
>> boot vmlinux root=/dev/sdb1 init=/bin/sh
115360+19584+3136+334528+42744d+4248+6368 entry: 0x8bfa8850
ARCH: SGI-IP22
PROMLIB: SGI ARCS firmware Version 1 Revision 10
PROMLIB: Total free ram 65839104 bytes (64296K,62MB)
CPU: MIPS-R5000 FPU<MIPS-R5000FPC> ICACHE DCACHE SCACHE
Loading R4000 MMU routines.
CPU revision is: 00002310
Primary instruction cache 32kb, linesize 32 bytes)
Primary data cache 32kb, linesize 32 bytes)
Linux version 2.2.1 (tsbogend@james.franken.de) (gcc version 2.7.2.3) #519 Mon 9
MC: SGI memory controller Revision 3
R4600/R5000 SCACHE size 512K, linesize 32 bytes.
calculating r4koff... 000dbd55(900437)
zs0: console input
Console: ttyS0 (Zilog8530)
Calibrating delay loop... 179.81 BogoMIPS
Memory: 60908k/196140k available (1172k kernel code, 2208k data)
Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
initialize_kbd: Keyboard reset failed, no ACK
SGI Zilog8530 serial driver version 1.00
Keyboard timeout[2]
Keyboard timeout[2]
tty00 at 0xbfbd9830 (irq = 21) is a Zilog8530
tty01 at 0xbfbd9838 (irq = 21) is a Zilog8530
pty: 256 Unix98 ptys configured
DS1286 Real Time Clock Driver v1.0
streamable misc devices registered (keyb:150, gfx:148)
RAM disk driver initialized: 16 RAM disks of 4096K size
wd33c93-0: chip=WD33c93B/13 no_sync=0xff no_dma=0 debug_flags=0x00
setup_args=,,,,,,,,,
Version 1.25 - 09/Jul/1997, Compiled Mar 29 1999 at 01:13:15
scsi0 : SGI WD93
scsi : 1 host. sending SDTR 0103013f0csync_xfer=2c Vendor: SGI Model: IBM DORS-32160 D
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 2, lun 0
sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST31055N 2
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 3, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4197405 [2049 MB] [2.0 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2069860 [1010 MB] [1.0 GB]
sgiseeq.c: David S. Miller (dm@engr.sgi.com)
eth0: SGI Seeq8003 08:00:69:0a:43:7c
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.254.20, my address is 192.168.254.30
Partition check:
sda: sda1 sda2 sda3 sda4
sdb: sdb1 sdb2 sdb3 sdb4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing prom memory: 0k freed
Freeing unused kernel memory: 52k freed
Warning: unable to open an initial console.
--jeff
next reply other threads:[~1999-05-01 23:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-05-01 23:40 Jeff Coffin [this message]
1999-05-02 0:14 ` Yet Closer Thomas Bogendoerfer
-- strict thread matches above, loose matches on Subject: below --
1999-05-02 4:10 Jeff Coffin
1999-05-01 19:39 Yet closer jcoffin
1999-05-01 21:52 ` Ralf Baechle
1999-05-02 10:24 ` Richard Hartensveld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3n1zouznd.fsf@chuck.sv.usweb.com \
--to=jcoffin@sv.usweb.com \
--cc=linux@cthulhu.engr.sgi.com \
--cc=ulfc@thepuffingroup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox