From: Takashi Iwai <tiwai@suse.de>
To: Huacai Chen <chenhuacai@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org, alsa-devel@alsa-project.org,
Zhangjin Wu <wuzhangjin@gmail.com>, Hua Yan <yanh@lemote.com>,
Fuxin Zhang <zhangfx@lemote.com>,
Hongliang Tao <taohl@lemote.com>, Huacai Chen <chenhc@lemote.com>
Subject: Re: [alsa-devel] [PATCH V2 13/16] ALSA: HDA: Make hda sound card usable for Loongson.
Date: Tue, 19 Jun 2012 11:26:56 +0200 [thread overview]
Message-ID: <s5hd34vlkin.wl%tiwai@suse.de> (raw)
In-Reply-To: <1340088624-25550-14-git-send-email-chenhc@lemote.com>
At Tue, 19 Jun 2012 14:50:21 +0800,
Huacai Chen wrote:
>
> Lemote A1004(Laptop) and A1205(All-In-One) use Conexant's hda codec,
> this patch make it usable:
> 1, Use 32-bit DMA as a workaround (Loongson has a hardware bug that it
> doesn't support DMA address above 4GB).
> 2, Modify patch_conexant.c to add Lemote specific code.
>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> Cc: alsa-devel@alsa-project.org
> ---
> include/linux/pci_ids.h | 2 +
> sound/pci/hda/hda_intel.c | 5 ++++
> sound/pci/hda/patch_conexant.c | 52 ++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 57 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index ab741b0..d8b0a52 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2906,3 +2906,5 @@
> #define PCI_DEVICE_ID_XEN_PLATFORM 0x0001
>
> #define PCI_VENDOR_ID_OCZ 0x1b85
> +
> +#define PCI_VENDOR_ID_LEMOTE 0x1c06
As Clemens already suggested, please split your patch. The addition
of PCI ID, addition of the workaround in HD-audio controller code, and
the modification to Conexant codec code are all different things.
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index 2b6392b..2b73ed4 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -3013,6 +3013,11 @@ static int DELAYED_INIT_MARK azx_first_init(struct azx *chip)
> gcap &= ~ICH6_GCAP_64OK;
> }
>
> +#ifdef CONFIG_CPU_LOONGSON3
> + /* Workaround: Loongson 3 doesn't support 64-bit DMA */
> + gcap &= ~ICH6_GCAP_64OK;
> +#endif
Where is CONFIG_CPU_LOONGSON3 defined at all?
This isn't found in the upstream Linus or linux-next tree.
> diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
> index 3acb582..1c8dfb9 100644
> --- a/sound/pci/hda/patch_conexant.c
> +++ b/sound/pci/hda/patch_conexant.c
> @@ -142,6 +142,7 @@ struct conexant_spec {
> unsigned int thinkpad:1;
> unsigned int hp_laptop:1;
> unsigned int asus:1;
> + unsigned int lemote:1;
In general, we don't accept such a static quirk any longer unless a
special reason is given. Doesn't the auto-parser work for you?
thanks,
Takashi
next prev parent reply other threads:[~2012-06-19 9:27 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-19 6:50 [PATCH V2 00/14] MIPS: Add Loongson-3 based machines support Huacai Chen
2012-06-19 6:50 ` [PATCH V2 01/16] MIPS: Loongson: Add basic Loongson-3 definition Huacai Chen
2012-06-19 9:36 ` Florian Fainelli
2012-06-19 10:44 ` Huacai Chen
2012-06-19 6:50 ` [PATCH V2 02/16] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2012-06-19 9:47 ` Florian Fainelli
2012-06-19 10:45 ` Huacai Chen
2012-06-19 6:50 ` [PATCH V2 03/16] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2012-06-19 11:08 ` Sergei Shtylyov
2012-06-19 11:46 ` Huacai Chen
2012-06-19 6:50 ` [PATCH V2 04/16] MIPS: Loongson: Make Loongson-3 to use BCD format for RTC Huacai Chen
2012-06-19 6:50 ` [PATCH V2 05/16] MIPS: Loongson: Add UEFI-like firmware interface support Huacai Chen
2012-06-19 6:50 ` [PATCH V2 06/16] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2012-06-19 6:50 ` [PATCH V2 07/16] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2012-06-19 6:50 ` [PATCH V2 08/16] MIPS: Loongson 3: Add serial port support Huacai Chen
2012-06-19 6:50 ` [PATCH V2 09/16] MIPS: Loongson: Add swiotlb to support big memory (>4GB) Huacai Chen
2012-06-19 6:50 ` [PATCH V2 10/16] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2012-06-19 6:50 ` [PATCH V2 11/16] ata: Use 32-bit DMA in AHCI for Loongson-3 Huacai Chen
2012-06-19 12:32 ` Jeff Garzik
2012-06-19 12:36 ` Huacai Chen
2012-06-19 6:50 ` [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson Huacai Chen
2012-06-19 7:19 ` Lucas Stach
2012-06-19 14:07 ` j.glisse
2012-06-20 6:12 ` Huacai Chen
2012-06-20 6:38 ` Lucas Stach
2012-06-20 6:54 ` Huacai Chen
2012-06-19 7:56 ` Michel Dänzer
2012-06-19 10:46 ` Huacai Chen
2012-06-19 13:57 ` j.glisse
2012-06-20 1:26 ` Alex Deucher
2012-06-20 8:28 ` Huacai Chen
2012-06-20 16:16 ` Alex Deucher
2012-06-19 6:50 ` [PATCH V2 13/16] ALSA: HDA: Make hda sound " Huacai Chen
2012-06-19 9:09 ` [alsa-devel] " Clemens Ladisch
2012-06-19 9:26 ` Takashi Iwai [this message]
2012-06-19 10:47 ` Huacai Chen
2012-06-19 6:50 ` [PATCH V2 14/16] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2012-06-19 6:50 ` [PATCH V2 15/16] MIPS: Loongson 3: Add CPU Hotplug support Huacai Chen
2012-06-19 9:31 ` Yong Zhang
2012-06-19 9:31 ` Yong Zhang
2012-06-19 10:51 ` Huacai Chen
2012-06-20 6:36 ` Yong Zhang
2012-06-20 6:36 ` Yong Zhang
2012-06-20 6:57 ` Huacai Chen
2012-06-19 9:32 ` Yong Zhang
2012-06-19 9:32 ` Yong Zhang
2012-06-19 6:50 ` [PATCH V2 16/16] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hd34vlkin.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=chenhc@lemote.com \
--cc=chenhuacai@gmail.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=taohl@lemote.com \
--cc=wuzhangjin@gmail.com \
--cc=yanh@lemote.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox