From: tip-bot for Qais Yousef <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-mips@linux-mips.org, abrestic@chromium.org,
jason@lakedaemon.net, mingo@kernel.org, tglx@linutronix.de,
linux-kernel@vger.kernel.org, qais.yousef@imgtec.com,
hpa@zytor.com
Subject: [tip:irq/core] irqchip: mips-gic: Handle pending interrupts once in __gic_irq_dispatch()
Date: Mon, 26 Jan 2015 02:45:33 -0800 [thread overview]
Message-ID: <tip-d7eb4f2ecccd71f701bc8873bcf07c2d3b0375f6@git.kernel.org> (raw)
In-Reply-To: <1421668289-828-1-git-send-email-qais.yousef@imgtec.com>
Commit-ID: d7eb4f2ecccd71f701bc8873bcf07c2d3b0375f6
Gitweb: http://git.kernel.org/tip/d7eb4f2ecccd71f701bc8873bcf07c2d3b0375f6
Author: Qais Yousef <qais.yousef@imgtec.com>
AuthorDate: Mon, 19 Jan 2015 11:51:29 +0000
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Mon, 26 Jan 2015 11:38:23 +0100
irqchip: mips-gic: Handle pending interrupts once in __gic_irq_dispatch()
When an interrupt occurs __gic_irq_dispatch() continuously reads local
and shared pending registers until all is serviced before
returning. The problem with that is that it could introduce a long
delay before returning if a piece of hardware keeps triggering while
in one of these loops.
To ensure fairness and priority doesn't get skewed a lot, read local
and shared pending registers once to service each pending IRQ once.
If another interupt triggers while servicing the current ones, then we
shall re-enter the handler after we return.
Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: <linux-mips@linux-mips.org>
Link: http://lkml.kernel.org/r/1421668289-828-1-git-send-email-qais.yousef@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
drivers/irqchip/irq-mips-gic.c | 44 +++++++++++++++++++++++++-----------------
1 file changed, 26 insertions(+), 18 deletions(-)
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index 2b0468e..f3f9873 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -234,9 +234,9 @@ int gic_get_c0_perfcount_int(void)
GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_PERFCTR));
}
-static unsigned int gic_get_int(void)
+static void gic_handle_shared_int(void)
{
- unsigned int i;
+ unsigned int i, intr, virq;
unsigned long *pcpu_mask;
unsigned long pending_reg, intrmask_reg;
DECLARE_BITMAP(pending, GIC_MAX_INTRS);
@@ -258,7 +258,16 @@ static unsigned int gic_get_int(void)
bitmap_and(pending, pending, intrmask, gic_shared_intrs);
bitmap_and(pending, pending, pcpu_mask, gic_shared_intrs);
- return find_first_bit(pending, gic_shared_intrs);
+ intr = find_first_bit(pending, gic_shared_intrs);
+ while (intr != gic_shared_intrs) {
+ virq = irq_linear_revmap(gic_irq_domain,
+ GIC_SHARED_TO_HWIRQ(intr));
+ do_IRQ(virq);
+
+ /* go to next pending bit */
+ bitmap_clear(pending, intr, 1);
+ intr = find_first_bit(pending, gic_shared_intrs);
+ }
}
static void gic_mask_irq(struct irq_data *d)
@@ -385,16 +394,26 @@ static struct irq_chip gic_edge_irq_controller = {
#endif
};
-static unsigned int gic_get_local_int(void)
+static void gic_handle_local_int(void)
{
unsigned long pending, masked;
+ unsigned int intr, virq;
pending = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_PEND));
masked = gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_MASK));
bitmap_and(&pending, &pending, &masked, GIC_NUM_LOCAL_INTRS);
- return find_first_bit(&pending, GIC_NUM_LOCAL_INTRS);
+ intr = find_first_bit(&pending, GIC_NUM_LOCAL_INTRS);
+ while (intr != GIC_NUM_LOCAL_INTRS) {
+ virq = irq_linear_revmap(gic_irq_domain,
+ GIC_LOCAL_TO_HWIRQ(intr));
+ do_IRQ(virq);
+
+ /* go to next pending bit */
+ bitmap_clear(&pending, intr, 1);
+ intr = find_first_bit(&pending, GIC_NUM_LOCAL_INTRS);
+ }
}
static void gic_mask_local_irq(struct irq_data *d)
@@ -453,19 +472,8 @@ static struct irq_chip gic_all_vpes_local_irq_controller = {
static void __gic_irq_dispatch(void)
{
- unsigned int intr, virq;
-
- while ((intr = gic_get_local_int()) != GIC_NUM_LOCAL_INTRS) {
- virq = irq_linear_revmap(gic_irq_domain,
- GIC_LOCAL_TO_HWIRQ(intr));
- do_IRQ(virq);
- }
-
- while ((intr = gic_get_int()) != gic_shared_intrs) {
- virq = irq_linear_revmap(gic_irq_domain,
- GIC_SHARED_TO_HWIRQ(intr));
- do_IRQ(virq);
- }
+ gic_handle_local_int();
+ gic_handle_shared_int();
}
static void gic_irq_dispatch(unsigned int irq, struct irq_desc *desc)
prev parent reply other threads:[~2015-01-26 10:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-19 11:51 [PATCH] MIPS: irq-mips-gic.c: handle pending interrupts once in __gic_irq_dispatch() Qais Yousef
2015-01-19 11:51 ` Qais Yousef
2015-01-26 10:45 ` tip-bot for Qais Yousef [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-d7eb4f2ecccd71f701bc8873bcf07c2d3b0375f6@git.kernel.org \
--to=tipbot@zytor.com \
--cc=abrestic@chromium.org \
--cc=hpa@zytor.com \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=qais.yousef@imgtec.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox