From: David Hildenbrand <david@redhat.com>
To: Miaohe Lin <linmiaohe@huawei.com>
Cc: ying.huang@intel.com, hch@lst.de, dhowells@redhat.com,
cl@linux.com, linux-mm@kvack.org, linux-kernel@vger.kernel.org,
akpm@linux-foundation.org, mike.kravetz@oracle.com,
naoya.horiguchi@nec.com, Minchan Kim <minchan@kernel.org>
Subject: Re: [PATCH v2 2/4] mm/migration: remove unneeded lock page and PageMovable check
Date: Thu, 2 Jun 2022 10:47:29 +0200 [thread overview]
Message-ID: <059fe8fe-bd89-477f-2430-277bb738525b@redhat.com> (raw)
In-Reply-To: <a96fab6c-f986-797f-aeb1-5fb8a1b5a4b8@huawei.com>
On 02.06.22 09:40, Miaohe Lin wrote:
> On 2022/6/1 18:31, David Hildenbrand wrote:
>> On 31.05.22 14:37, Miaohe Lin wrote:
>>> On 2022/5/31 19:59, David Hildenbrand wrote:
>>>> Sorry for the late reply, was on vacation.
>>>
>>> That's all right. Hope you have a great time. ;)
>>>
>>>>
>>>>>>>
>>>>>>> But for isolated page, PageLRU is cleared. So when the isolated page is released, __clear_page_lru_flags
>>>>>>> won't be called. So we have to clear the PG_active and PG_unevictable here manully. So I think
>>>>>>> this code block works. Or am I miss something again?
>>>>>>
>>>>>> Let's assume the following: page as freed by the owner and we enter
>>>>>> unmap_and_move().
>>>>>>
>>>>>>
>>>>>> #1: enter unmap_and_move() // page_count is 1
>>>>>> #2: enter isolate_movable_page() // page_count is 1
>>>>>> #2: get_page_unless_zero() // page_count is now 2
>>>>>> #1: if (page_count(page) == 1) { // does not trigger
>>>>>> #2: put_page(page); // page_count is now 1
>>>>>> #1: put_page(page); // page_count is now 0 -> freed
>>>>>>
>>>>>>
>>>>>> #1 will trigger __put_page() -> __put_single_page() ->
>>>>>> __page_cache_release() will not clear the flags because it's not an LRU
>>>>>> page at that point in time, right (-> isolated)?
>>>>>
>>>>> Sorry, you're right. I thought the old page will be freed via putback_lru_page which will
>>>>> set PageLRU back instead of put_page directly. So if the above race occurs, PG_active and
>>>>> PG_unevictable will remain set while page goes to the buddy and check_free_page will complain
>>>>> about it. But it seems this is never witnessed?
>>>>
>>>> Maybe
>>>>
>>>> a) we were lucky so far and didn't trigger it
>>>> b) the whole code block is dead code because we are missing something
>>>> c) we are missing something else :)
>>>
>>> I think I found the things we missed in another email [1].
>>> [1]: https://lore.kernel.org/all/948ea45e-3b2b-e16c-5b8c-4c34de0ea593@huawei.com/
>>>
>>> Paste the main content of [1] here:
>>>
>>> "
>>> There are 3 cases in unmap_and_move:
>>>
>>> 1.page is freed through "if (page_count(page) == 1)" code block. This works
>>> as PG_active and PG_unevictable are cleared here.
>>>
>>> 2. Failed to migrate the page. The page won't be release so we don't care about it.
>>
>> Right, page is un-isolated.
>>
>>>
>>> 3. The page is migrated successfully. The PG_active and PG_unevictable are cleared
>>> via folio_migrate_flags():
>>>
>>> if (folio_test_clear_active(folio)) {
>>> VM_BUG_ON_FOLIO(folio_test_unevictable(folio), folio);
>>> folio_set_active(newfolio);
>>> } else if (folio_test_clear_unevictable(folio))
>>> folio_set_unevictable(newfolio);
>>
>> Right.
>>
>>>
>>> For the above race case, the page won't be freed through "if (page_count(page) == 1)" code block.
>>> It will just be migrated and freed via put_page() after folio_migrate_flags() having cleared PG_active
>>> and PG_unevictable.
>>> "
>>> Or Am I miss something again? :)
>>
>> For #1, I'm still not sure what would happen on a speculative reference.
>>
>> It's worth summarizing that
>>
>> a) free_pages_prepare() will clear both flags via page->flags &=
>> ~PAGE_FLAGS_CHECK_AT_PREP;
>>
>> b) free_pages_prepare() will bail out if any flag is set in
>> check_free_page().
>>
>> As we've never seen b) in the wild, this certainly has low priority, and
>> maybe it really cannot happen right now.
>>
>> However, maybe really allowing these flags to be set when freeing the
>> page and removing the "page_count(page) == 1" case from migration code
>> would be the clean thing to do.
>
> IMHO, check_free_page is used to catch possible problem. There's the comment of PAGE_FLAGS_CHECK_AT_FREE:
>
> /*
> * Flags checked when a page is freed. Pages being freed should not have
> * these flags set. If they are, there is a problem.
> */
> #define PAGE_FLAGS_CHECK_AT_FREE
>
> There might be an assumption: when page is freed, it shouldn't be an active or unevictable page. It should be
> inactive and evictable. So allowing these flags to be set when freeing the page might not be a good idea?
Yeah, and we'd be lifting that restriction because there is good reason
to do so.
Maybe we *could* special case for isolated pages; however, that adds
runtime overhead. Of course, we could perform different checks for e.g.,
DEBUG_VM vs !DEBUG_VM.
--
Thanks,
David / dhildenb
next prev parent reply other threads:[~2022-06-02 8:47 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-25 13:27 [PATCH v2 0/4] A few cleanup and fixup patches for migration Miaohe Lin
2022-04-25 13:27 ` [PATCH v2 1/4] mm/migration: reduce the rcu lock duration Miaohe Lin
2022-04-29 9:54 ` David Hildenbrand
2022-05-09 3:14 ` Miaohe Lin
2022-05-24 12:36 ` Miaohe Lin
2022-05-06 3:23 ` ying.huang
2022-05-09 3:20 ` Miaohe Lin
2022-04-25 13:27 ` [PATCH v2 2/4] mm/migration: remove unneeded lock page and PageMovable check Miaohe Lin
2022-04-29 10:07 ` David Hildenbrand
2022-05-09 8:51 ` Miaohe Lin
2022-05-11 15:23 ` David Hildenbrand
2022-05-12 2:25 ` Miaohe Lin
2022-05-12 7:10 ` David Hildenbrand
2022-05-12 13:26 ` Miaohe Lin
2022-05-12 16:50 ` David Hildenbrand
2022-05-16 2:44 ` Miaohe Lin
2022-05-31 11:59 ` David Hildenbrand
2022-05-31 12:37 ` Miaohe Lin
2022-06-01 10:31 ` David Hildenbrand
2022-06-02 7:40 ` Miaohe Lin
2022-06-02 8:47 ` David Hildenbrand [this message]
2022-06-07 2:20 ` Miaohe Lin
2022-06-08 10:05 ` David Hildenbrand
2022-06-08 13:31 ` Miaohe Lin
2022-05-24 12:47 ` Miaohe Lin
2022-04-25 13:27 ` [PATCH v2 3/4] mm/migration: return errno when isolate_huge_page failed Miaohe Lin
2022-04-29 10:08 ` David Hildenbrand
2022-05-09 8:03 ` Miaohe Lin
2022-04-29 11:36 ` Muchun Song
2022-05-09 3:23 ` Miaohe Lin
2022-05-09 4:21 ` Muchun Song
2022-05-09 7:51 ` Miaohe Lin
2022-04-25 13:27 ` [PATCH v2 4/4] mm/migration: fix potential pte_unmap on an not mapped pte Miaohe Lin
2022-04-29 9:48 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=059fe8fe-bd89-477f-2430-277bb738525b@redhat.com \
--to=david@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=cl@linux.com \
--cc=dhowells@redhat.com \
--cc=hch@lst.de \
--cc=linmiaohe@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mike.kravetz@oracle.com \
--cc=minchan@kernel.org \
--cc=naoya.horiguchi@nec.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).