From: Matthew Wilcox <matthew.r.wilcox@intel.com>
To: linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>, willy@linux.intel.com
Subject: [PATCH v10 04/21] Allow page fault handlers to perform the COW
Date: Tue, 26 Aug 2014 23:45:24 -0400 [thread overview]
Message-ID: <0a73e91d6815936bc748b4be3b71fc8a3cdff898.1409110741.git.matthew.r.wilcox@intel.com> (raw)
In-Reply-To: <cover.1409110741.git.matthew.r.wilcox@intel.com>
In-Reply-To: <cover.1409110741.git.matthew.r.wilcox@intel.com>
Currently COW of an XIP file is done by first bringing in a read-only
mapping, then retrying the fault and copying the page. It is much more
efficient to tell the fault handler that a COW is being attempted (by
passing in the pre-allocated page in the vm_fault structure), and allow
the handler to perform the COW operation itself.
The handler cannot insert the page itself if there is already a read-only
mapping at that address, so allow the handler to return VM_FAULT_LOCKED
and set the fault_page to be NULL. This indicates to the MM code that
the i_mmap_mutex is held instead of the page lock.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
include/linux/mm.h | 1 +
mm/memory.c | 33 ++++++++++++++++++++++++---------
2 files changed, 25 insertions(+), 9 deletions(-)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc8..0a47817 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -208,6 +208,7 @@ struct vm_fault {
pgoff_t pgoff; /* Logical page offset based on vma */
void __user *virtual_address; /* Faulting virtual address */
+ struct page *cow_page; /* Handler may choose to COW */
struct page *page; /* ->fault handlers should return a
* page here, unless VM_FAULT_NOPAGE
* is set (which is also implied by
diff --git a/mm/memory.c b/mm/memory.c
index adeac30..3368785 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2000,6 +2000,7 @@ static int do_page_mkwrite(struct vm_area_struct *vma, struct page *page,
vmf.pgoff = page->index;
vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE;
vmf.page = page;
+ vmf.cow_page = NULL;
ret = vma->vm_ops->page_mkwrite(vma, &vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
@@ -2698,7 +2699,8 @@ oom:
* See filemap_fault() and __lock_page_retry().
*/
static int __do_fault(struct vm_area_struct *vma, unsigned long address,
- pgoff_t pgoff, unsigned int flags, struct page **page)
+ pgoff_t pgoff, unsigned int flags,
+ struct page *cow_page, struct page **page)
{
struct vm_fault vmf;
int ret;
@@ -2707,10 +2709,13 @@ static int __do_fault(struct vm_area_struct *vma, unsigned long address,
vmf.pgoff = pgoff;
vmf.flags = flags;
vmf.page = NULL;
+ vmf.cow_page = cow_page;
ret = vma->vm_ops->fault(vma, &vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
return ret;
+ if (!vmf.page)
+ goto out;
if (unlikely(PageHWPoison(vmf.page))) {
if (ret & VM_FAULT_LOCKED)
@@ -2724,6 +2729,7 @@ static int __do_fault(struct vm_area_struct *vma, unsigned long address,
else
VM_BUG_ON_PAGE(!PageLocked(vmf.page), vmf.page);
+ out:
*page = vmf.page;
return ret;
}
@@ -2897,7 +2903,7 @@ static int do_read_fault(struct mm_struct *mm, struct vm_area_struct *vma,
pte_unmap_unlock(pte, ptl);
}
- ret = __do_fault(vma, address, pgoff, flags, &fault_page);
+ ret = __do_fault(vma, address, pgoff, flags, NULL, &fault_page);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
return ret;
@@ -2937,26 +2943,35 @@ static int do_cow_fault(struct mm_struct *mm, struct vm_area_struct *vma,
return VM_FAULT_OOM;
}
- ret = __do_fault(vma, address, pgoff, flags, &fault_page);
+ ret = __do_fault(vma, address, pgoff, flags, new_page, &fault_page);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
goto uncharge_out;
- copy_user_highpage(new_page, fault_page, address, vma);
+ if (fault_page)
+ copy_user_highpage(new_page, fault_page, address, vma);
__SetPageUptodate(new_page);
pte = pte_offset_map_lock(mm, pmd, address, &ptl);
if (unlikely(!pte_same(*pte, orig_pte))) {
pte_unmap_unlock(pte, ptl);
- unlock_page(fault_page);
- page_cache_release(fault_page);
+ if (fault_page) {
+ unlock_page(fault_page);
+ page_cache_release(fault_page);
+ } else {
+ mutex_unlock(&vma->vm_file->f_mapping->i_mmap_mutex);
+ }
goto uncharge_out;
}
do_set_pte(vma, address, new_page, pte, true, true);
mem_cgroup_commit_charge(new_page, memcg, false);
lru_cache_add_active_or_unevictable(new_page, vma);
pte_unmap_unlock(pte, ptl);
- unlock_page(fault_page);
- page_cache_release(fault_page);
+ if (fault_page) {
+ unlock_page(fault_page);
+ page_cache_release(fault_page);
+ } else {
+ mutex_unlock(&vma->vm_file->f_mapping->i_mmap_mutex);
+ }
return ret;
uncharge_out:
mem_cgroup_cancel_charge(new_page, memcg);
@@ -2975,7 +2990,7 @@ static int do_shared_fault(struct mm_struct *mm, struct vm_area_struct *vma,
int dirtied = 0;
int ret, tmp;
- ret = __do_fault(vma, address, pgoff, flags, &fault_page);
+ ret = __do_fault(vma, address, pgoff, flags, NULL, &fault_page);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
return ret;
--
2.0.0
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-08-27 4:35 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-27 3:45 [PATCH v10 00/21] Support ext4 on NV-DIMMs Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 01/21] axonram: Fix bug in direct_access Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 02/21] Change direct_access calling convention Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 03/21] Fix XIP fault vs truncate race Matthew Wilcox
2014-08-27 3:45 ` Matthew Wilcox [this message]
2014-08-27 3:45 ` [PATCH v10 05/21] Introduce IS_DAX(inode) Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 06/21] Add copy_to_iter(), copy_from_iter() and iov_iter_zero() Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 07/21] Replace XIP read and write with DAX I/O Matthew Wilcox
2014-09-14 14:11 ` Boaz Harrosh
2014-08-27 3:45 ` [PATCH v10 08/21] Replace ext2_clear_xip_target with dax_clear_blocks Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 09/21] Replace the XIP page fault handler with the DAX page fault handler Matthew Wilcox
2014-09-03 7:47 ` Dave Chinner
2014-09-10 15:23 ` Matthew Wilcox
2014-09-11 3:09 ` Dave Chinner
2014-09-24 15:43 ` Matthew Wilcox
2014-09-25 1:01 ` Dave Chinner
2014-08-27 3:45 ` [PATCH v10 10/21] Replace xip_truncate_page with dax_truncate_page Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 11/21] Replace XIP documentation with DAX documentation Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 12/21] Remove get_xip_mem Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 13/21] ext2: Remove ext2_xip_verify_sb() Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 14/21] ext2: Remove ext2_use_xip Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 15/21] ext2: Remove xip.c and xip.h Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 16/21] Remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 17/21] ext2: Remove ext2_aops_xip Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 18/21] Get rid of most mentions of XIP in ext2 Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 19/21] xip: Add xip_zero_page_range Matthew Wilcox
2014-09-03 9:21 ` Dave Chinner
2014-09-04 21:08 ` Matthew Wilcox
2014-09-04 21:36 ` Theodore Ts'o
2014-09-08 18:59 ` Matthew Wilcox
2014-08-27 3:45 ` [PATCH v10 20/21] ext4: Add DAX functionality Matthew Wilcox
2014-09-03 11:13 ` Dave Chinner
2014-09-10 16:49 ` Boaz Harrosh
2014-09-11 4:38 ` Dave Chinner
2014-09-14 12:25 ` Boaz Harrosh
2014-09-15 6:15 ` Dave Chinner
2014-09-15 9:41 ` Boaz Harrosh
2014-08-27 3:45 ` [PATCH v10 21/21] brd: Rename XIP to DAX Matthew Wilcox
2014-08-27 20:06 ` [PATCH v10 00/21] Support ext4 on NV-DIMMs Andrew Morton
2014-08-27 21:12 ` Matthew Wilcox
2014-08-27 21:46 ` Andrew Morton
2014-08-28 1:30 ` Andy Lutomirski
2014-08-28 16:50 ` Matthew Wilcox
2014-08-28 15:45 ` Matthew Wilcox
2014-08-27 21:22 ` Christoph Lameter
2014-08-27 21:30 ` Andrew Morton
2014-08-27 23:04 ` One Thousand Gnomes
2014-08-28 7:17 ` Dave Chinner
2014-08-30 23:11 ` Christian Stroetmann
2014-08-28 8:08 ` Boaz Harrosh
2014-08-28 22:09 ` Zwisler, Ross
2014-09-03 12:05 ` [PATCH 1/1] xfs: add DAX support Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0a73e91d6815936bc748b4be3b71fc8a3cdff898.1409110741.git.matthew.r.wilcox@intel.com \
--to=matthew.r.wilcox@intel.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=willy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).