From: Anton Salikhmetov <salikhmetov@gmail.com>
To: linux-mm@kvack.org, jakob@unthought.net,
linux-kernel@vger.kernel.org, valdis.kletnieks@vt.edu,
riel@redhat.com, ksm@42.dk, staubach@redhat.com,
jesper.juhl@gmail.com, torvalds@linux-foundation.org,
a.p.zijlstra@chello.nl, akpm@linux-foundation.org,
protasnb@gmail.com, miklos@szeredi.hu, r.e.wolff@bitwizard.nl,
hidave.darkstar@gmail.com, hch@infradead.org
Subject: [PATCH -v5 1/2] Massive code cleanup of sys_msync()
Date: Thu, 17 Jan 2008 03:57:45 +0300 [thread overview]
Message-ID: <12005314711867-git-send-email-salikhmetov@gmail.com> (raw)
In-Reply-To: <12005314662518-git-send-email-salikhmetov@gmail.com>
Substantial code cleanup of the sys_msync() function:
1) using the PAGE_ALIGN() macro instead of "manual" alignment;
2) improved readability of the loop traversing the process memory regions.
Signed-off-by: Anton Salikhmetov <salikhmetov@gmail.com>
---
mm/msync.c | 74 +++++++++++++++++++++++++++++------------------------------
1 files changed, 36 insertions(+), 38 deletions(-)
diff --git a/mm/msync.c b/mm/msync.c
index 144a757..44997bf 100644
--- a/mm/msync.c
+++ b/mm/msync.c
@@ -1,24 +1,22 @@
/*
- * linux/mm/msync.c
+ * The msync() system call.
*
- * Copyright (C) 1994-1999 Linus Torvalds
+ * Copyright (C) 1994-1999 Linus Torvalds
+ * Copyright (C) 2008 Anton Salikhmetov <salikhmetov@gmail.com>
*/
-/*
- * The msync() system call.
- */
+#include <linux/file.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/syscalls.h>
#include <linux/sched.h>
+#include <linux/syscalls.h>
/*
* MS_SYNC syncs the entire file - including mappings.
*
* MS_ASYNC does not start I/O (it used to, up to 2.5.67).
- * Nor does it marks the relevant pages dirty (it used to up to 2.6.17).
+ * Nor does it mark the relevant pages dirty (it used to up to 2.6.17).
* Now it doesn't do anything, since dirty pages are properly tracked.
*
* The application may now run fsync() to
@@ -33,8 +31,7 @@ asmlinkage long sys_msync(unsigned long start, size_t len, int flags)
unsigned long end;
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
- int unmapped_error = 0;
- int error = -EINVAL;
+ int error = -EINVAL, unmapped_error = 0;
if (flags & ~(MS_ASYNC | MS_INVALIDATE | MS_SYNC))
goto out;
@@ -42,62 +39,63 @@ asmlinkage long sys_msync(unsigned long start, size_t len, int flags)
goto out;
if ((flags & MS_ASYNC) && (flags & MS_SYNC))
goto out;
- error = -ENOMEM;
- len = (len + ~PAGE_MASK) & PAGE_MASK;
+
+ len = PAGE_ALIGN(len);
end = start + len;
- if (end < start)
+ if (end < start) {
+ error = -ENOMEM;
goto out;
+ }
+
error = 0;
+
if (end == start)
goto out;
+
/*
* If the interval [start,end) covers some unmapped address ranges,
* just ignore them, but return -ENOMEM at the end.
*/
down_read(&mm->mmap_sem);
vma = find_vma(mm, start);
- for (;;) {
+ do {
struct file *file;
- /* Still start < end. */
- error = -ENOMEM;
- if (!vma)
- goto out_unlock;
- /* Here start < vma->vm_end. */
+ if (!vma) {
+ error = -ENOMEM;
+ break;
+ }
if (start < vma->vm_start) {
start = vma->vm_start;
- if (start >= end)
- goto out_unlock;
+ if (start >= end) {
+ error = -ENOMEM;
+ break;
+ }
unmapped_error = -ENOMEM;
}
- /* Here vma->vm_start <= start < vma->vm_end. */
- if ((flags & MS_INVALIDATE) &&
- (vma->vm_flags & VM_LOCKED)) {
+ if ((flags & MS_INVALIDATE) && (vma->vm_flags & VM_LOCKED)) {
error = -EBUSY;
- goto out_unlock;
+ break;
}
- file = vma->vm_file;
start = vma->vm_end;
- if ((flags & MS_SYNC) && file &&
- (vma->vm_flags & VM_SHARED)) {
+
+ file = vma->vm_file;
+ if (file && (vma->vm_flags & VM_SHARED) && (flags & MS_SYNC)) {
get_file(file);
up_read(&mm->mmap_sem);
error = do_fsync(file, 0);
fput(file);
- if (error || start >= end)
+ if (error)
goto out;
down_read(&mm->mmap_sem);
vma = find_vma(mm, start);
- } else {
- if (start >= end) {
- error = 0;
- goto out_unlock;
- }
- vma = vma->vm_next;
+ continue;
}
- }
-out_unlock:
+
+ vma = vma->vm_next;
+ } while (start < end);
up_read(&mm->mmap_sem);
+
out:
- return error ? : unmapped_error;
+ return error ? error : unmapped_error;
}
--
1.4.4.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2008-01-17 0:57 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-17 0:57 [PATCH -v5 0/2] Updating ctime and mtime for memory-mapped files Anton Salikhmetov
2008-01-17 0:57 ` Anton Salikhmetov [this message]
2008-01-17 11:01 ` [PATCH -v5 1/2] Massive code cleanup of sys_msync() Miklos Szeredi
2008-01-17 11:47 ` Anton Salikhmetov
2008-01-17 0:57 ` [PATCH -v5 2/2] Updating ctime and mtime at syncing Anton Salikhmetov
2008-01-17 11:13 ` Miklos Szeredi
2008-01-17 12:16 ` Anton Salikhmetov
2008-01-17 12:45 ` Miklos Szeredi
2008-01-17 12:51 ` Rogier Wolff
2008-01-17 13:16 ` Anton Salikhmetov
2008-01-17 13:24 ` Rogier Wolff
2008-01-17 13:34 ` Anton Salikhmetov
2008-01-17 13:33 ` Miklos Szeredi
2008-01-17 13:40 ` Anton Salikhmetov
2008-01-17 15:45 ` Miklos Szeredi
2008-01-17 16:20 ` Anton Salikhmetov
2008-01-17 16:26 ` Miklos Szeredi
2008-01-17 16:33 ` Anton Salikhmetov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12005314711867-git-send-email-salikhmetov@gmail.com \
--to=salikhmetov@gmail.com \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=hch@infradead.org \
--cc=hidave.darkstar@gmail.com \
--cc=jakob@unthought.net \
--cc=jesper.juhl@gmail.com \
--cc=ksm@42.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=miklos@szeredi.hu \
--cc=protasnb@gmail.com \
--cc=r.e.wolff@bitwizard.nl \
--cc=riel@redhat.com \
--cc=staubach@redhat.com \
--cc=torvalds@linux-foundation.org \
--cc=valdis.kletnieks@vt.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).