From: Nitin Gupta <ngupta@vflare.org>
To: Pekka Enberg <penberg@cs.helsinki.fi>,
Hugh Dickins <hugh.dickins@tiscali.co.uk>,
Andrew Morton <akpm@linux-foundation.org>,
Greg KH <greg@kroah.com>,
Dan Magenheimer <dan.magenheimer@oracle.com>,
Rik van Riel <riel@redhat.com>, Avi Kivity <avi@redhat.com>,
Christoph Hellwig <hch@infradead.org>,
Minchan Kim <minchan.kim@gmail.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: linux-mm <linux-mm@kvack.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH 0/8] zcache: page cache compression support
Date: Fri, 16 Jul 2010 18:07:42 +0530 [thread overview]
Message-ID: <1279283870-18549-1-git-send-email-ngupta@vflare.org> (raw)
Frequently accessed filesystem data is stored in memory to reduce access to
(much) slower backing disks. Under memory pressure, these pages are freed and
when needed again, they have to be read from disks again. When combined working
set of all running application exceeds amount of physical RAM, we get extereme
slowdown as reading a page from disk can take time in order of milliseconds.
Memory compression increases effective memory size and allows more pages to
stay in RAM. Since de/compressing memory pages is several orders of magnitude
faster than disk I/O, this can provide signifant performance gains for many
workloads. Also, with multi-cores becoming common, benefits of reduced disk I/O
should easily outweigh the problem of increased CPU usage.
It is implemented as a "backend" for cleancache_ops [1] which provides
callbacks for events such as when a page is to be removed from the page cache
and when it is required again. We use them to implement a 'second chance' cache
for these evicted page cache pages by compressing and storing them in memory
itself.
We only keep pages that compress to PAGE_SIZE/2 or less. Compressed chunks are
stored using xvmalloc memory allocator which is already being used by zram
driver for the same purpose. Zero-filled pages are checked and no memory is
allocated for them.
A separate "pool" is created for each mount instance for a cleancache-aware
filesystem. Each incoming page is identified with <pool_id, inode_no, index>
where inode_no identifies file within the filesystem corresponding to pool_id
and index is offset of the page within this inode. Within a pool, inodes are
maintained in an rb-tree and each of its nodes points to a separate radix-tree
which maintains list of pages within that inode.
While compression reduces disk I/O, it also reduces the space available for
normal (uncompressed) page cache. This can result in more frequent page cache
reclaim and thus higher CPU overhead. Thus, it's important to maintain good hit
rate for compressed cache or increased CPU overhead can nullify any other
benefits. This requires adaptive (compressed) cache resizing and page
replacement policies that can maintain optimal cache size and quickly reclaim
unused compressed chunks. This work is yet to be done. However, in the current
state, it allows manually resizing cache size using (per-pool) sysfs node
'memlimit' which in turn frees any excess pages *sigh* randomly.
Finally, it uses percpu stats and compression buffers to allow better
performance on multi-cores. Still, there are known bottlenecks like a single
xvmalloc mempool per zcache pool and few others. I will work on this when I
start with profiling.
* Performance numbers:
- Tested using iozone filesystem benchmark
- 4 CPUs, 1G RAM
- Read performance gain: ~2.5X
- Random read performance gain: ~3X
- In general, performance gains for every kind of I/O
Test details with graphs can be found here:
http://code.google.com/p/compcache/wiki/zcacheIOzone
If I can get some help with testing, it would be intersting to find its
effect in more real-life workloads. In particular, I'm intersted in finding
out its effect in KVM virtualization case where it can potentially allow
running more number of VMs per-host for a given amount of RAM. With zcache
enabled, VMs can be assigned much smaller amount of memory since host can now
hold bulk of page-cache pages, allowing VMs to maintain similar level of
performance while a greater number of them can be hosted.
* How to test:
All patches are against 2.6.35-rc5:
- First, apply all prerequisite patches here:
http://compcache.googlecode.com/hg/sub-projects/zcache_base_patches
- Then apply this patch series; also uploaded here:
http://compcache.googlecode.com/hg/sub-projects/zcache_patches
Nitin Gupta (8):
Allow sharing xvmalloc for zram and zcache
Basic zcache functionality
Create sysfs nodes and export basic statistics
Shrink zcache based on memlimit
Eliminate zero-filled pages
Compress pages using LZO
Use xvmalloc to store compressed chunks
Document sysfs entries
Documentation/ABI/testing/sysfs-kernel-mm-zcache | 53 +
drivers/staging/Makefile | 2 +
drivers/staging/zram/Kconfig | 22 +
drivers/staging/zram/Makefile | 5 +-
drivers/staging/zram/xvmalloc.c | 8 +
drivers/staging/zram/zcache_drv.c | 1312 ++++++++++++++++++++++
drivers/staging/zram/zcache_drv.h | 90 ++
7 files changed, 1491 insertions(+), 1 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm-zcache
create mode 100644 drivers/staging/zram/zcache_drv.c
create mode 100644 drivers/staging/zram/zcache_drv.h
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2010-07-16 12:37 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-16 12:37 Nitin Gupta [this message]
2010-07-16 12:37 ` [PATCH 1/8] Allow sharing xvmalloc for zram and zcache Nitin Gupta
2010-07-17 18:10 ` Rik van Riel
2010-07-16 12:37 ` [PATCH 2/8] Basic zcache functionality Nitin Gupta
2010-07-18 8:14 ` Pekka Enberg
2010-07-18 9:45 ` Nitin Gupta
2010-07-18 8:27 ` Pekka Enberg
2010-07-18 8:44 ` Eric Dumazet
2010-07-18 9:51 ` Nitin Gupta
2010-07-16 12:37 ` [PATCH 3/8] Create sysfs nodes and export basic statistics Nitin Gupta
2010-07-16 12:37 ` [PATCH 4/8] Shrink zcache based on memlimit Nitin Gupta
2010-07-20 23:03 ` Minchan Kim
2010-07-21 4:52 ` Nitin Gupta
2010-07-21 11:32 ` Ed Tomlinson
2010-07-23 19:23 ` Nitin Gupta
2010-07-16 12:37 ` [PATCH 5/8] Eliminate zero-filled pages Nitin Gupta
2010-07-16 12:37 ` [PATCH 6/8] Compress pages using LZO Nitin Gupta
2010-07-16 12:37 ` [PATCH 7/8] Use xvmalloc to store compressed chunks Nitin Gupta
2010-07-18 7:53 ` Pekka Enberg
2010-07-18 8:21 ` Nitin Gupta
2010-07-19 4:36 ` Minchan Kim
2010-07-19 6:48 ` Nitin Gupta
2010-07-16 12:37 ` [PATCH 8/8] Document sysfs entries Nitin Gupta
2010-07-17 21:13 ` [PATCH 0/8] zcache: page cache compression support Ed Tomlinson
2010-07-18 2:23 ` Nitin Gupta
2010-07-18 7:50 ` Pekka Enberg
2010-07-18 8:12 ` Nitin Gupta
2010-07-19 19:57 ` Dan Magenheimer
2010-07-20 13:50 ` Nitin Gupta
2010-07-20 14:28 ` Dan Magenheimer
2010-07-21 4:27 ` Nitin Gupta
2010-07-21 17:37 ` Dan Magenheimer
2010-07-22 19:14 ` Greg KH
2010-07-22 19:54 ` Dan Magenheimer
2010-07-22 21:00 ` Greg KH
2011-01-10 13:16 ` Kirill A. Shutemov
2011-01-18 17:53 ` Dan Magenheimer
2011-01-20 12:33 ` Nitin Gupta
2011-01-20 12:47 ` Christoph Hellwig
2011-01-20 13:16 ` Pekka Enberg
2011-01-20 13:58 ` Nitin Gupta
[not found] <575348163.1113381279906498028.JavaMail.root@zmail06.collab.prod.int.phx2.redhat.com>
2010-07-23 17:36 ` caiqian
2010-07-23 17:41 ` CAI Qian
2010-07-23 18:02 ` CAI Qian
2010-07-24 14:41 ` Valdis.Kletnieks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1279283870-18549-1-git-send-email-ngupta@vflare.org \
--to=ngupta@vflare.org \
--cc=akpm@linux-foundation.org \
--cc=avi@redhat.com \
--cc=dan.magenheimer@oracle.com \
--cc=greg@kroah.com \
--cc=hch@infradead.org \
--cc=hugh.dickins@tiscali.co.uk \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan.kim@gmail.com \
--cc=penberg@cs.helsinki.fi \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).