From: Gleb Natapov <gleb@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org, avi@redhat.com,
mingo@elte.hu, a.p.zijlstra@chello.nl, tglx@linutronix.de,
hpa@zytor.com, riel@redhat.com, cl@linux-foundation.org,
mtosatti@redhat.com
Subject: [PATCH v5 01/12] Move kvm_smp_prepare_boot_cpu() from kvmclock.c to kvm.c.
Date: Mon, 19 Jul 2010 18:30:51 +0300 [thread overview]
Message-ID: <1279553462-7036-2-git-send-email-gleb@redhat.com> (raw)
In-Reply-To: <1279553462-7036-1-git-send-email-gleb@redhat.com>
Async PF also needs to hook into smp_prepare_boot_cpu so move the hook
into generic code.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
---
arch/x86/include/asm/kvm_para.h | 1 +
arch/x86/kernel/kvm.c | 11 +++++++++++
arch/x86/kernel/kvmclock.c | 13 +------------
3 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index 05eba5e..42298ab 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -65,6 +65,7 @@ struct kvm_mmu_op_release_pt {
#include <asm/processor.h>
extern void kvmclock_init(void);
+extern int kvm_register_clock(char *txt);
/* This instruction is vmcall. On non-VT architectures, it will generate a
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 63b0ec8..e6db179 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -231,10 +231,21 @@ static void __init paravirt_ops_setup(void)
#endif
}
+#ifdef CONFIG_SMP
+static void __init kvm_smp_prepare_boot_cpu(void)
+{
+ WARN_ON(kvm_register_clock("primary cpu clock"));
+ native_smp_prepare_boot_cpu();
+}
+#endif
+
void __init kvm_guest_init(void)
{
if (!kvm_para_available())
return;
paravirt_ops_setup();
+#ifdef CONFIG_SMP
+ smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
+#endif
}
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index eb9b76c..67a5f46 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -125,7 +125,7 @@ static struct clocksource kvm_clock = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int kvm_register_clock(char *txt)
+int kvm_register_clock(char *txt)
{
int cpu = smp_processor_id();
int low, high;
@@ -150,14 +150,6 @@ static void __cpuinit kvm_setup_secondary_clock(void)
}
#endif
-#ifdef CONFIG_SMP
-static void __init kvm_smp_prepare_boot_cpu(void)
-{
- WARN_ON(kvm_register_clock("primary cpu clock"));
- native_smp_prepare_boot_cpu();
-}
-#endif
-
/*
* After the clock is registered, the host will keep writing to the
* registered memory location. If the guest happens to shutdown, this memory
@@ -204,9 +196,6 @@ void __init kvmclock_init(void)
x86_cpuinit.setup_percpu_clockev =
kvm_setup_secondary_clock;
#endif
-#ifdef CONFIG_SMP
- smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
-#endif
machine_ops.shutdown = kvm_shutdown;
#ifdef CONFIG_KEXEC
machine_ops.crash_shutdown = kvm_crash_shutdown;
--
1.7.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2010-07-19 15:31 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-19 15:30 [PATCH v5 00/12] KVM: Add host swap event notifications for PV guest Gleb Natapov
2010-07-19 15:30 ` Gleb Natapov [this message]
2010-07-19 15:30 ` [PATCH v5 02/12] Add PV MSR to enable asynchronous page faults delivery Gleb Natapov
2010-08-23 15:22 ` Avi Kivity
2010-08-23 15:29 ` Gleb Natapov
2010-07-19 15:30 ` [PATCH v5 03/12] Add async PF initialization to PV guest Gleb Natapov
2010-07-19 19:52 ` Rik van Riel
2010-08-23 15:26 ` Avi Kivity
2010-08-23 15:35 ` Gleb Natapov
2010-08-23 16:08 ` Christoph Lameter
2010-08-23 16:10 ` Gleb Natapov
2010-08-23 16:19 ` Avi Kivity
2010-07-19 15:30 ` [PATCH v5 04/12] Provide special async page fault handler when async PF capability is detected Gleb Natapov
2010-08-23 15:48 ` Avi Kivity
2010-08-23 15:52 ` Rik van Riel
2010-08-23 16:22 ` Avi Kivity
2010-08-24 7:31 ` Gleb Natapov
2010-08-24 9:02 ` Avi Kivity
2010-07-19 15:30 ` [PATCH v5 05/12] Export __get_user_pages_fast Gleb Natapov
2010-07-19 15:30 ` [PATCH v5 06/12] Add get_user_pages() variant that fails if major fault is required Gleb Natapov
2010-08-23 15:50 ` Avi Kivity
2010-07-19 15:30 ` [PATCH v5 07/12] Maintain memslot version number Gleb Natapov
2010-08-23 15:53 ` Avi Kivity
2010-07-19 15:30 ` [PATCH v5 08/12] Inject asynchronous page fault into a guest if page is swapped out Gleb Natapov
2010-08-23 16:17 ` Avi Kivity
2010-08-24 7:52 ` Gleb Natapov
2010-08-24 9:04 ` Avi Kivity
2010-08-24 12:28 ` Gleb Natapov
2010-08-24 12:33 ` Avi Kivity
2010-07-19 15:30 ` [PATCH v5 09/12] Retry fault before vmentry Gleb Natapov
2010-08-24 9:25 ` Avi Kivity
2010-08-24 9:33 ` Gleb Natapov
2010-08-24 9:38 ` Avi Kivity
2010-07-19 15:31 ` [PATCH v5 10/12] Handle async PF in non preemptable context Gleb Natapov
2010-08-24 9:30 ` Avi Kivity
2010-08-24 9:36 ` Gleb Natapov
2010-08-24 9:46 ` Avi Kivity
2010-07-19 15:31 ` [PATCH v5 11/12] Let host know whether the guest can handle async PF in non-userspace context Gleb Natapov
2010-08-24 9:31 ` Avi Kivity
2010-07-19 15:31 ` [PATCH v5 12/12] Send async PF when guest is not in userspace too Gleb Natapov
2010-08-24 9:36 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1279553462-7036-2-git-send-email-gleb@redhat.com \
--to=gleb@redhat.com \
--cc=a.p.zijlstra@chello.nl \
--cc=avi@redhat.com \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@elte.hu \
--cc=mtosatti@redhat.com \
--cc=riel@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).