linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>,
	Avi Kivity <avi@redhat.com>, Thomas Gleixner <tglx@linutronix.de>,
	Rik van Riel <riel@redhat.com>, Ingo Molnar <mingo@elte.hu>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
	linux-mm@kvack.org,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	David Miller <davem@davemloft.net>,
	Hugh Dickins <hugh.dickins@tiscali.co.uk>,
	Mel Gorman <mel@csn.ul.ie>, Nick Piggin <npiggin@kernel.dk>,
	Paul McKenney <paulmck@linux.vnet.ibm.com>,
	Yanmin Zhang <yanmin_zhang@linux.intel.com>
Subject: Re: [PATCH 20/20] mm: Optimize page_lock_anon_vma() fast-path
Date: Wed, 20 Apr 2011 14:38:44 +0200	[thread overview]
Message-ID: <1303303124.8345.218.camel@twins> (raw)
In-Reply-To: <20110419130800.7148a602.akpm@linux-foundation.org>

On Tue, 2011-04-19 at 13:08 -0700, Andrew Morton wrote:
> On Fri, 01 Apr 2011 14:13:18 +0200
> Peter Zijlstra <a.p.zijlstra@chello.nl> wrote:
> 
> > Optimize the page_lock_anon_vma() fast path to be one atomic op,
> > instead of two.
> > 
> > Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> > Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
> > LKML-Reference: <new-submission>
> > ---
> >  mm/rmap.c |   86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 82 insertions(+), 4 deletions(-)
> > 
> > Index: linux-2.6/mm/rmap.c
> > ===================================================================
> > --- linux-2.6.orig/mm/rmap.c
> > +++ linux-2.6/mm/rmap.c
> > @@ -85,6 +85,29 @@ static inline struct anon_vma *anon_vma_
> >  static inline void anon_vma_free(struct anon_vma *anon_vma)
> >  {
> >  	VM_BUG_ON(atomic_read(&anon_vma->refcount));
> > +
> > +	/*
> > +	 * Synchronize against page_lock_anon_vma() such that
> > +	 * we can safely hold the lock without the anon_vma getting
> > +	 * freed.
> > +	 *
> > +	 * Relies on the full mb implied by the atomic_dec_and_test() from
> > +	 * put_anon_vma() against the acquire barrier implied by
> > +	 * mutex_trylock() from page_lock_anon_vma(). This orders:
> > +	 *
> > +	 * page_lock_anon_vma()		VS	put_anon_vma()
> > +	 *   mutex_trylock()			  atomic_dec_and_test()
> > +	 *   LOCK				  MB
> > +	 *   atomic_read()			  mutex_is_locked()
> > +	 *
> > +	 * LOCK should suffice since the actual taking of the lock must
> > +	 * happen _before_ what follows.
> > +	 */
> > +	if (mutex_is_locked(&anon_vma->root->mutex)) {
> > +		anon_vma_lock(anon_vma);
> > +		anon_vma_unlock(anon_vma);
> > +	}
> > +
> >  	kmem_cache_free(anon_vma_cachep, anon_vma);
> >  }
> 
> Did we need to include all this stuff in uniprocessor builds?

For sure, even UP can schedule while holding a mutex.

> It would be neater to add a new anon_vma_is_locked().

I'd agree if there was a user outside of rmap.c, but seeing as rmap.c is
and must be aware of the whole anon_vma->root thing I don't much see the
point in extra wrappery.

> This code is too tricksy to deserve life :(

I'd mostly agree with you there, but there was a strong desire to keep
page_lock_anon_vma() a single atomic. I'll see if I can actually measure
any difference using aim7 or so, which I think is the favorite anon_vma
stress tool.

> > @@ -371,20 +394,75 @@ struct anon_vma *page_get_anon_vma(struc
> >  	return anon_vma;
> >  }
> >  
> > +/*
> > + * Similar to page_get_anon_vma() except it locks the anon_vma.
> > + *
> > + * Its a little more complex as it tries to keep the fast path to a single
> > + * atomic op -- the trylock. If we fail the trylock, we fall back to getting a
> > + * reference like with page_get_anon_vma() and then block on the mutex.
> > + */
> >  struct anon_vma *page_lock_anon_vma(struct page *page)
> >  {
> > -	struct anon_vma *anon_vma = page_get_anon_vma(page);
> > +	struct anon_vma *anon_vma = NULL;
> > +	unsigned long anon_mapping;
> >  
> > -	if (anon_vma)
> > -		anon_vma_lock(anon_vma);
> > +	rcu_read_lock();
> > +	anon_mapping = (unsigned long) ACCESS_ONCE(page->mapping);
> > +	if ((anon_mapping & PAGE_MAPPING_FLAGS) != PAGE_MAPPING_ANON)
> > +		goto out;
> 
> Why?  Needs a comment.

Uhm, why we're testing to see if there is an anon_vma at all? Or why we
need that ACCESS_ONCE()?

> > +	if (!page_mapped(page))
> > +		goto out;
> 
> Why?  How can this come about? Needs a comment.

Well, the existing comment says to look at page_get_anon_vma() and the
comment there does explain how all this is racy wrt page_remove_rmap().
Do you want more comments?

> > +
> > +	anon_vma = (struct anon_vma *) (anon_mapping - PAGE_MAPPING_ANON);
> > +	if (mutex_trylock(&anon_vma->root->mutex)) {
> 
> anon_vma_trylock()?
> 
> Or just remove all the wrapper functions and open-code all the locking.
> These tricks all seem pretty tied-up with the mutex implementation
> anyway.

Well, we cannot remove all the wrappers, anon_vma_{un,}lock() are used
outside of rmap.c and we don't want to expose the implementation of the
anon_vma locking outside of here, but like said, inside rmap.c I don't
see much reason to introduce new wrappers.

And yes, all of this is needed because of the anon_vma->lock mutex
conversion since, in general, we cannot schedule under rcu_read_lock and
therefore have to play these tricks with the reference count to bridge
the gap between rcu_read_unlock() and acquiring the lock.

> > +		/*
> > +		 * If we observe a !0 refcount, then holding the lock ensures
> > +		 * the anon_vma will not go away, see __put_anon_vma().
> > +		 */
> > +		if (!atomic_read(&anon_vma->refcount)) {
> > +			anon_vma_unlock(anon_vma);
> > +			anon_vma = NULL;
> > +		}
> > +		goto out;
> > +	}
> > +
> > +	/* trylock failed, we got to sleep */
> > +	if (!atomic_inc_not_zero(&anon_vma->refcount)) {
> > +		anon_vma = NULL;
> > +		goto out;
> > +	}
> >  
> > +	if (!page_mapped(page)) {
> > +		put_anon_vma(anon_vma);
> > +		anon_vma = NULL;
> > +		goto out;
> > +	}
> 
> Also quite opaque, needs decent commentary.
> 
> I'd have expected this test to occur after the lock was acquired.

Right, so I think we could drop that test from both here and
page_get_anon_vma() and nothing would break, its simply avoiding some
work in case we do detect the race with page_remove_rmap().

So yes, I think I'll move it down because that'll widen the scope of
this optimization.

> > +	/* we pinned the anon_vma, its safe to sleep */
> > +	rcu_read_unlock();
> > +	anon_vma_lock(anon_vma);
> > +
> > +	if (atomic_dec_and_test(&anon_vma->refcount)) {
> > +		/*
> > +		 * Oops, we held the last refcount, release the lock
> > +		 * and bail -- can't simply use put_anon_vma() because
> > +		 * we'll deadlock on the anon_vma_lock() recursion.
> > +		 */
> > +		anon_vma_unlock(anon_vma);
> > +		__put_anon_vma(anon_vma);
> > +		anon_vma = NULL;
> > +	}
> > +
> > +	return anon_vma;
> > +
> > +out:
> > +	rcu_read_unlock();
> >  	return anon_vma;
> >  }
> >  
> >  void page_unlock_anon_vma(struct anon_vma *anon_vma)
> >  {
> >  	anon_vma_unlock(anon_vma);
> > -	put_anon_vma(anon_vma);
> >  }
> 
> Geeze, I hope this patch is worth it :( :(

There is a reason this is the last patch in the series ;-)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2011-04-20 12:39 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-01 12:12 [PATCH 00/20] mm: Preemptibility -v10 Peter Zijlstra
2011-04-01 12:12 ` [PATCH 01/20] mm: mmu_gather rework Peter Zijlstra
2011-04-19 20:06   ` Andrew Morton
2011-04-20  8:47     ` Peter Zijlstra
2011-04-20  9:10       ` Peter Zijlstra
2011-04-01 12:13 ` [PATCH 02/20] powerpc: " Peter Zijlstra
2011-04-01 12:13 ` [PATCH 03/20] sparc: " Peter Zijlstra
2011-04-01 12:13 ` [PATCH 04/20] s390: " Peter Zijlstra
2011-04-01 12:13 ` [PATCH 05/20] arm: " Peter Zijlstra
2011-04-01 12:13 ` [PATCH 06/20] sh: " Peter Zijlstra
2011-04-01 12:13 ` [PATCH 07/20] ia64: " Peter Zijlstra
2011-04-01 12:13 ` [PATCH 08/20] um: " Peter Zijlstra
2011-04-01 12:13 ` [PATCH 09/20] mm: Now that all old mmu_gather code is gone, remove the storage Peter Zijlstra
2011-04-01 12:13 ` [PATCH 10/20] mm, powerpc: Move the RCU page-table freeing into generic code Peter Zijlstra
2011-04-01 12:13 ` [PATCH 11/20] s390: use generic RCP page-table freeing Peter Zijlstra
2011-04-01 12:13 ` [PATCH 12/20] mm: Extended batches for generic mmu_gather Peter Zijlstra
2011-04-19 20:06   ` Andrew Morton
2011-04-20 10:40     ` Peter Zijlstra
2011-04-01 12:13 ` [PATCH 13/20] lockdep, mutex: Provide mutex_lock_nest_lock Peter Zijlstra
2011-04-19 20:06   ` Andrew Morton
2011-04-20 11:03     ` Peter Zijlstra
2011-04-01 12:13 ` [PATCH 14/20] mm: Remove i_mmap_lock lockbreak Peter Zijlstra
2011-04-19 20:07   ` Andrew Morton
2011-04-21 13:32     ` Peter Zijlstra
2011-04-01 12:13 ` [PATCH 15/20] mm: Convert i_mmap_lock to a mutex Peter Zijlstra
2011-04-19 20:07   ` Andrew Morton
2011-04-21 13:28     ` Peter Zijlstra
2011-04-01 12:13 ` [PATCH 16/20] mm: Revert page_lock_anon_vma() lock annotation Peter Zijlstra
2011-04-01 12:13 ` [PATCH 17/20] mm: Improve page_lock_anon_vma() comment Peter Zijlstra
2011-04-01 12:13 ` [PATCH 18/20] mm: Use refcounts for page_lock_anon_vma() Peter Zijlstra
2011-04-01 12:13 ` [PATCH 19/20] mm: Convert anon_vma->lock to a mutex Peter Zijlstra
2011-04-19 20:07   ` Andrew Morton
2011-04-21 13:28     ` Peter Zijlstra
2011-04-01 12:13 ` [PATCH 20/20] mm: Optimize page_lock_anon_vma() fast-path Peter Zijlstra
2011-04-19 20:08   ` Andrew Morton
2011-04-20 12:38     ` Peter Zijlstra [this message]
2011-04-20 15:00       ` Peter Zijlstra
2011-04-01 13:51 ` [PATCH 00/20] mm: Preemptibility -v10 Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1303303124.8345.218.camel@twins \
    --to=a.p.zijlstra@chello.nl \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=avi@redhat.com \
    --cc=benh@kernel.crashing.org \
    --cc=davem@davemloft.net \
    --cc=hugh.dickins@tiscali.co.uk \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mel@csn.ul.ie \
    --cc=mingo@elte.hu \
    --cc=npiggin@kernel.dk \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=riel@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --cc=yanmin_zhang@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).