From: Mel Gorman <mgorman@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>,
Linux-Netdev <netdev@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
David Miller <davem@davemloft.net>, Neil Brown <neilb@suse.de>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Mel Gorman <mgorman@suse.de>
Subject: [PATCH 10/14] netvm: Set PF_MEMALLOC as appropriate during SKB processing
Date: Fri, 9 Sep 2011 11:57:21 +0100 [thread overview]
Message-ID: <1315565845-16857-11-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1315565845-16857-1-git-send-email-mgorman@suse.de>
In order to make sure pfmemalloc packets receive all memory
needed to proceed, ensure processing of pfmemalloc SKBs happens
under PF_MEMALLOC. This is limited to a subset of protocols that
are expected to be used for writing to swap. Taps are not allowed to
use PF_MEMALLOC as these are expected to communicate with userspace
processes which could be paged out.
[a.p.zijlstra@chello.nl: Ideas taken from various patches]
[jslaby@suse.cz: Lock imbalance fix]
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
include/net/sock.h | 5 +++++
net/core/dev.c | 48 ++++++++++++++++++++++++++++++++++++++++++++----
net/core/sock.c | 16 ++++++++++++++++
3 files changed, 65 insertions(+), 4 deletions(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index cf3f102..09813fc 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -669,8 +669,13 @@ static inline __must_check int sk_add_backlog(struct sock *sk, struct sk_buff *s
return 0;
}
+extern int __sk_backlog_rcv(struct sock *sk, struct sk_buff *skb);
+
static inline int sk_backlog_rcv(struct sock *sk, struct sk_buff *skb)
{
+ if (skb_pfmemalloc(skb))
+ return __sk_backlog_rcv(sk, skb);
+
return sk->sk_backlog_rcv(sk, skb);
}
diff --git a/net/core/dev.c b/net/core/dev.c
index 17d67b5..6f9dc92 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3099,6 +3099,23 @@ void netdev_rx_handler_unregister(struct net_device *dev)
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
+/*
+ * Limit the use of PFMEMALLOC reserves to those protocols that implement
+ * the special handling of PFMEMALLOC skbs.
+ */
+static bool skb_pfmemalloc_protocol(struct sk_buff *skb)
+{
+ switch (skb->protocol) {
+ case __constant_htons(ETH_P_ARP):
+ case __constant_htons(ETH_P_IP):
+ case __constant_htons(ETH_P_IPV6):
+ case __constant_htons(ETH_P_8021Q):
+ return true;
+ default:
+ return false;
+ }
+}
+
static int __netif_receive_skb(struct sk_buff *skb)
{
struct packet_type *ptype, *pt_prev;
@@ -3108,15 +3125,28 @@ static int __netif_receive_skb(struct sk_buff *skb)
bool deliver_exact = false;
int ret = NET_RX_DROP;
__be16 type;
+ unsigned long pflags = current->flags;
if (!netdev_tstamp_prequeue)
net_timestamp_check(skb);
trace_netif_receive_skb(skb);
+ /*
+ * PFMEMALLOC skbs are special, they should
+ * - be delivered to SOCK_MEMALLOC sockets only
+ * - stay away from userspace
+ * - have bounded memory usage
+ *
+ * Use PF_MEMALLOC as this saves us from propagating the allocation
+ * context down to all allocation sites.
+ */
+ if (skb_pfmemalloc(skb))
+ current->flags |= PF_MEMALLOC;
+
/* if we've gotten here through NAPI, check netpoll */
if (netpoll_receive_skb(skb))
- return NET_RX_DROP;
+ goto out;
if (!skb->skb_iif)
skb->skb_iif = skb->dev->ifindex;
@@ -3147,6 +3177,9 @@ another_round:
}
#endif
+ if (skb_pfmemalloc(skb))
+ goto skip_taps;
+
list_for_each_entry_rcu(ptype, &ptype_all, list) {
if (!ptype->dev || ptype->dev == skb->dev) {
if (pt_prev)
@@ -3155,13 +3188,17 @@ another_round:
}
}
+skip_taps:
#ifdef CONFIG_NET_CLS_ACT
skb = handle_ing(skb, &pt_prev, &ret, orig_dev);
if (!skb)
- goto out;
+ goto unlock;
ncls:
#endif
+ if (skb_pfmemalloc(skb) && !skb_pfmemalloc_protocol(skb))
+ goto drop;
+
rx_handler = rcu_dereference(skb->dev->rx_handler);
if (rx_handler) {
if (pt_prev) {
@@ -3170,7 +3207,7 @@ ncls:
}
switch (rx_handler(&skb)) {
case RX_HANDLER_CONSUMED:
- goto out;
+ goto unlock;
case RX_HANDLER_ANOTHER:
goto another_round;
case RX_HANDLER_EXACT:
@@ -3212,6 +3249,7 @@ ncls:
if (pt_prev) {
ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
} else {
+drop:
atomic_long_inc(&skb->dev->rx_dropped);
kfree_skb(skb);
/* Jamal, now you will not able to escape explaining
@@ -3220,8 +3258,10 @@ ncls:
ret = NET_RX_DROP;
}
-out:
+unlock:
rcu_read_unlock();
+out:
+ tsk_restore_flags(current, pflags, PF_MEMALLOC);
return ret;
}
diff --git a/net/core/sock.c b/net/core/sock.c
index 07e1292..0f28a9b 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -247,6 +247,22 @@ void sk_clear_memalloc(struct sock *sk)
}
EXPORT_SYMBOL_GPL(sk_clear_memalloc);
+int __sk_backlog_rcv(struct sock *sk, struct sk_buff *skb)
+{
+ int ret;
+ unsigned long pflags = current->flags;
+
+ /* these should have been dropped before queueing */
+ BUG_ON(!sock_flag(sk, SOCK_MEMALLOC));
+
+ current->flags |= PF_MEMALLOC;
+ ret = sk->sk_backlog_rcv(sk, skb);
+ tsk_restore_flags(current, pflags, PF_MEMALLOC);
+
+ return ret;
+}
+EXPORT_SYMBOL(__sk_backlog_rcv);
+
#if defined(CONFIG_CGROUPS) && !defined(CONFIG_NET_CLS_CGROUP)
int net_cls_subsys_id = -1;
EXPORT_SYMBOL_GPL(net_cls_subsys_id);
--
1.7.3.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2011-09-09 10:57 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-09 10:57 [PATCH 00/14] Swap-over-NBD without deadlocking v6 Mel Gorman
2011-09-09 10:57 ` [PATCH 01/14] mm: Serialize access to min_free_kbytes Mel Gorman
2011-09-09 10:57 ` [PATCH 02/14] mm: sl[au]b: Add knowledge of PFMEMALLOC reserve pages Mel Gorman
2011-09-09 10:57 ` [PATCH 03/14] mm: Introduce __GFP_MEMALLOC to allow access to emergency reserves Mel Gorman
2011-09-09 10:57 ` [PATCH 04/14] mm: allow PF_MEMALLOC from softirq context Mel Gorman
2011-09-09 10:57 ` [PATCH 05/14] mm: Ignore mempolicies when using ALLOC_NO_WATERMARK Mel Gorman
2011-09-09 10:57 ` [PATCH 06/14] net: Introduce sk_allocation() to allow addition of GFP flags depending on the individual socket Mel Gorman
2011-09-09 10:57 ` [PATCH 07/14] netvm: Allow the use of __GFP_MEMALLOC by specific sockets Mel Gorman
2011-09-09 10:57 ` [PATCH 08/14] netvm: Allow skb allocation to use PFMEMALLOC reserves Mel Gorman
2011-09-09 10:57 ` [PATCH 09/14] netvm: Propagate page->pfmemalloc to skb Mel Gorman
2011-09-09 10:57 ` Mel Gorman [this message]
2011-09-09 10:57 ` [PATCH 11/14] mm: Micro-optimise slab to avoid a function call Mel Gorman
2011-09-09 10:57 ` [PATCH 12/14] nbd: Set SOCK_MEMALLOC for access to PFMEMALLOC reserves Mel Gorman
2011-09-09 10:57 ` [PATCH 13/14] mm: Throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage Mel Gorman
2011-09-09 10:57 ` [PATCH 14/14] mm: Account for the number of times direct reclaimers get throttled Mel Gorman
-- strict thread matches above, loose matches on Subject: below --
2011-10-06 12:41 [PATCH 00/14] Swap-over-NBD without deadlocking V7 Mel Gorman
2011-10-06 12:41 ` [PATCH 10/14] netvm: Set PF_MEMALLOC as appropriate during SKB processing Mel Gorman
2011-06-20 13:12 [PATCH 00/14] Swap-over-NBD without deadlocking v5 Mel Gorman
2011-06-20 13:12 ` [PATCH 10/14] netvm: Set PF_MEMALLOC as appropriate during SKB processing Mel Gorman
2011-06-09 8:02 [PATCH 00/14] Swap-over-NBD without deadlocking v4r3 Mel Gorman
2011-06-09 8:02 ` [PATCH 10/14] netvm: Set PF_MEMALLOC as appropriate during SKB processing Mel Gorman
2011-06-09 10:21 ` Michał Mirosław
2011-06-09 11:35 ` Mel Gorman
2011-06-09 12:28 ` Michał Mirosław
2011-06-09 12:56 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315565845-16857-11-git-send-email-mgorman@suse.de \
--to=mgorman@suse.de \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=neilb@suse.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).