From: Michel Lespinasse <walken@google.com>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Dave Hansen <dave@linux.vnet.ibm.com>,
Rik van Riel <riel@redhat.com>,
Balbir Singh <bsingharora@gmail.com>,
Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>,
Johannes Weiner <jweiner@redhat.com>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
Hugh Dickins <hughd@google.com>, Michael Wolf <mjwolf@us.ibm.com>
Subject: [PATCH 0/9] V2: idle page tracking / working set estimation
Date: Tue, 27 Sep 2011 17:48:58 -0700 [thread overview]
Message-ID: <1317170947-17074-1-git-send-email-walken@google.com> (raw)
This is a followup to the prior version of this patchset, which I sent out
on September 16.
I have addressed most of the basic feedback I got so far:
- Renamed struct pr_info -> struct page_referenced_info
- Config option now depends on 64BIT, as we may not have sufficient
free page flags in 32-bit builds
- Renamed mem -> memcg in kstaled code within memcontrol.c
- Uninlined kstaled_scan_page
- Replaced strict_strtoul -> kstrtoul
- Report PG_stale in /proc/kpageflags
- Fix accounting of THP pages. Sorry for forgeting to do this in the
V1 patchset - to detail the change here, what I had to do was make sure
page_referenced() reports THP pages as dirty (as they always are - the
dirty bit in the pmd is currently meaningless) and update the minimalistic
implementation change to count THP pages as equivalent to 512 small pages.
- The ugliest parts of patch 6 (rate limit pages scanned per second) have
been reworked. If the scanning thread gets delayed, it tries to catch up
so as to minimize jitter. If it can't catch up, it would probably be a
good idea to increase the scanning interval, but this is left up
to userspace.
Michel Lespinasse (9):
page_referenced: replace vm_flags parameter with struct page_referenced_info
kstaled: documentation and config option.
kstaled: page_referenced_kstaled() and supporting infrastructure.
kstaled: minimalistic implementation.
kstaled: skip non-RAM regions.
kstaled: rate limit pages scanned per second.
kstaled: add histogram sampling functionality
kstaled: add incrementally updating stale page count
kstaled: export PG_stale in /proc/kpageflags
Documentation/cgroups/memory.txt | 103 ++++++++-
arch/x86/include/asm/page_types.h | 8 +
arch/x86/kernel/e820.c | 45 ++++
fs/proc/page.c | 4 +
include/linux/kernel-page-flags.h | 2 +
include/linux/ksm.h | 9 +-
include/linux/mmzone.h | 11 +
include/linux/page-flags.h | 50 ++++
include/linux/pagemap.h | 11 +-
include/linux/rmap.h | 82 ++++++-
mm/Kconfig | 10 +
mm/internal.h | 1 +
mm/ksm.c | 15 +-
mm/memcontrol.c | 479 +++++++++++++++++++++++++++++++++++++
mm/memory_hotplug.c | 6 +
mm/mlock.c | 1 +
mm/rmap.c | 138 ++++++-----
mm/swap.c | 1 +
mm/vmscan.c | 20 +-
19 files changed, 899 insertions(+), 97 deletions(-)
--
1.7.3.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2011-09-28 0:49 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-28 0:48 Michel Lespinasse [this message]
2011-09-28 0:48 ` [PATCH 1/9] page_referenced: replace vm_flags parameter with struct page_referenced_info Michel Lespinasse
2011-09-28 6:28 ` KAMEZAWA Hiroyuki
2011-09-28 0:49 ` [PATCH 2/9] kstaled: documentation and config option Michel Lespinasse
2011-09-28 6:53 ` KAMEZAWA Hiroyuki
2011-09-28 23:48 ` Michel Lespinasse
2011-09-29 5:40 ` KAMEZAWA Hiroyuki
2011-09-28 0:49 ` [PATCH 3/9] kstaled: page_referenced_kstaled() and supporting infrastructure Michel Lespinasse
2011-09-28 7:18 ` KAMEZAWA Hiroyuki
2011-09-29 0:09 ` Michel Lespinasse
2011-09-28 0:49 ` [PATCH 4/9] kstaled: minimalistic implementation Michel Lespinasse
2011-09-28 7:41 ` Peter Zijlstra
2011-09-28 8:01 ` Michel Lespinasse
2011-09-28 10:26 ` Peter Zijlstra
2011-09-28 8:00 ` KAMEZAWA Hiroyuki
2012-02-20 9:17 ` Zhu Yanhai
2011-09-28 0:49 ` [PATCH 5/9] kstaled: skip non-RAM regions Michel Lespinasse
2011-09-28 8:03 ` KAMEZAWA Hiroyuki
2011-09-28 0:49 ` [PATCH 6/9] kstaled: rate limit pages scanned per second Michel Lespinasse
2011-09-28 8:13 ` KAMEZAWA Hiroyuki
2011-09-28 8:19 ` Michel Lespinasse
2011-09-28 8:59 ` KAMEZAWA Hiroyuki
2011-10-14 1:25 ` Michel Lespinasse
2011-10-14 4:54 ` KAMEZAWA Hiroyuki
2011-09-28 0:49 ` [PATCH 7/9] kstaled: add histogram sampling functionality Michel Lespinasse
2011-09-28 8:22 ` KAMEZAWA Hiroyuki
2011-09-28 0:49 ` [PATCH 8/9] kstaled: add incrementally updating stale page count Michel Lespinasse
2011-09-28 0:49 ` [PATCH 9/9] kstaled: export PG_stale in /proc/kpageflags Michel Lespinasse
2011-09-29 16:43 ` [PATCH 0/9] V2: idle page tracking / working set estimation Eric B Munson
2011-09-29 20:25 ` Michel Lespinasse
2011-09-29 21:18 ` Eric B Munson
2011-09-30 18:19 ` Eric B Munson
2011-09-30 21:16 ` Michel Lespinasse
2011-09-30 21:40 ` Eric B Munson
2011-10-03 15:06 ` Eric B Munson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317170947-17074-1-git-send-email-walken@google.com \
--to=walken@google.com \
--cc=a.p.zijlstra@chello.nl \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=bsingharora@gmail.com \
--cc=dave@linux.vnet.ibm.com \
--cc=hughd@google.com \
--cc=jweiner@redhat.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mjwolf@us.ibm.com \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).