linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Rik van Riel <riel@redhat.com>
To: linux-mm@kvack.org
Cc: akpm@linux-foundation.org, aarcange@redhat.com,
	peterz@infradead.org, minchan@gmail.com,
	kosaki.motohiro@gmail.com, andi@firstfloor.org,
	hannes@cmpxchg.org, mel@csn.ul.ie, linux-kernel@vger.kernel.org,
	Rik van Riel <riel@surriel.com>, Rik van Riel <riel@redhat.com>
Subject: [PATCH -mm 5/7] mm: remove x86 arch_get_unmapped_area(_topdown)
Date: Mon, 18 Jun 2012 18:05:24 -0400	[thread overview]
Message-ID: <1340057126-31143-6-git-send-email-riel@redhat.com> (raw)
In-Reply-To: <1340057126-31143-1-git-send-email-riel@redhat.com>

From: Rik van Riel <riel@surriel.com>

The generic arch_get_unmapped_area(_topdown) should now be able
to do everything x86 needs.  Remove the x86 specific functions.

TODO: make the hugetlbfs arch_get_unmapped_area call the generic
code with proper alignment info.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
---
 arch/x86/include/asm/pgtable_64.h |    2 -
 arch/x86/kernel/sys_x86_64.c      |  162 -------------------------------------
 2 files changed, 0 insertions(+), 164 deletions(-)

diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 8408ccd..0ff6500 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -167,8 +167,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 extern int kern_addr_valid(unsigned long addr);
 extern void cleanup_highmap(void);
 
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 #define HAVE_ARCH_GET_ADDRESS_RANGE
 #define HAVE_ARCH_ALIGN_ADDR
 
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index ac0afb8..0243c58 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -131,165 +131,3 @@ void arch_get_address_range(unsigned long flags, unsigned long *begin,
 		*end = current->mm->mmap_base;
 	}
 }
-
-unsigned long
-arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	unsigned long start_addr;
-	unsigned long begin, end;
-
-	if (flags & MAP_FIXED)
-		return addr;
-
-	arch_get_address_range(flags, &begin, &end, ALLOC_UP);
-
-	if (len > end)
-		return -ENOMEM;
-
-	if (addr) {
-		addr = PAGE_ALIGN(addr);
-		vma = find_vma(mm, addr);
-		if (end - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
-			return addr;
-	}
-	if (((flags & MAP_32BIT) || test_thread_flag(TIF_ADDR32))
-	    && len <= mm->cached_hole_size) {
-		mm->cached_hole_size = 0;
-		mm->free_area_cache = begin;
-	}
-	addr = mm->free_area_cache;
-	if (addr < begin)
-		addr = begin;
-	start_addr = addr;
-
-full_search:
-
-	addr = arch_align_addr(addr, filp, pgoff, flags, ALLOC_UP);
-
-	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
-		/* At this point:  (!vma || addr < vma->vm_end). */
-		if (end - len < addr) {
-			/*
-			 * Start a new search - just in case we missed
-			 * some holes.
-			 */
-			if (start_addr != begin) {
-				start_addr = addr = begin;
-				mm->cached_hole_size = 0;
-				goto full_search;
-			}
-			return -ENOMEM;
-		}
-		if (!vma || addr + len <= vma->vm_start) {
-			/*
-			 * Remember the place where we stopped the search:
-			 */
-			mm->free_area_cache = addr + len;
-			return addr;
-		}
-		if (addr + mm->cached_hole_size < vma->vm_start)
-			mm->cached_hole_size = vma->vm_start - addr;
-
-		addr = vma->vm_end;
-		addr = arch_align_addr(addr, filp, pgoff, flags, ALLOC_UP);
-	}
-}
-
-
-unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
-			  const unsigned long len, const unsigned long pgoff,
-			  const unsigned long flags)
-{
-	struct vm_area_struct *vma;
-	struct mm_struct *mm = current->mm;
-	unsigned long addr = addr0, start_addr;
-
-	/* requested length too big for entire address space */
-	if (len > TASK_SIZE)
-		return -ENOMEM;
-
-	if (flags & MAP_FIXED)
-		return addr;
-
-	/* for MAP_32BIT mappings we force the legact mmap base */
-	if (!test_thread_flag(TIF_ADDR32) && (flags & MAP_32BIT))
-		goto bottomup;
-
-	/* requesting a specific address */
-	if (addr) {
-		addr = PAGE_ALIGN(addr);
-		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr &&
-				(!vma || addr + len <= vma->vm_start))
-			return addr;
-	}
-
-	/* check if free_area_cache is useful for us */
-	if (len <= mm->cached_hole_size) {
-		mm->cached_hole_size = 0;
-		mm->free_area_cache = mm->mmap_base;
-	}
-
-try_again:
-	/* either no address requested or can't fit in requested address hole */
-	start_addr = addr = mm->free_area_cache;
-
-	if (addr < len)
-		goto fail;
-
-	addr -= len;
-	do {
-		addr = arch_align_addr(addr, filp, pgoff, flags, ALLOC_DOWN);
-
-		/*
-		 * Lookup failure means no vma is above this address,
-		 * else if new region fits below vma->vm_start,
-		 * return with success:
-		 */
-		vma = find_vma(mm, addr);
-		if (!vma || addr+len <= vma->vm_start)
-			/* remember the address as a hint for next time */
-			return mm->free_area_cache = addr;
-
-		/* remember the largest hole we saw so far */
-		if (addr + mm->cached_hole_size < vma->vm_start)
-			mm->cached_hole_size = vma->vm_start - addr;
-
-		/* try just below the current vma->vm_start */
-		addr = vma->vm_start-len;
-	} while (len < vma->vm_start);
-
-fail:
-	/*
-	 * if hint left us with no space for the requested
-	 * mapping then try again:
-	 */
-	if (start_addr != mm->mmap_base) {
-		mm->free_area_cache = mm->mmap_base;
-		mm->cached_hole_size = 0;
-		goto try_again;
-	}
-
-bottomup:
-	/*
-	 * A failed mmap() very likely causes application failure,
-	 * so fall back to the bottom-up function here. This scenario
-	 * can happen with large stack limits and large mmap()
-	 * allocations.
-	 */
-	mm->cached_hole_size = ~0UL;
-	mm->free_area_cache = TASK_UNMAPPED_BASE;
-	addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
-	/*
-	 * Restore the topdown base:
-	 */
-	mm->free_area_cache = mm->mmap_base;
-	mm->cached_hole_size = ~0UL;
-
-	return addr;
-}
-- 
1.7.7.6

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2012-06-18 22:06 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-18 22:05 [PATCH -mm 0/7] mm: scalable and unified arch_get_unmapped_area Rik van Riel
2012-06-18 22:05 ` [PATCH -mm 1/7] mm: track free size between VMAs in VMA rbtree Rik van Riel
2012-06-19 23:25   ` Andrew Morton
2012-06-21 11:01   ` Peter Zijlstra
2012-06-21 11:07   ` Peter Zijlstra
2012-06-21 14:47   ` Mel Gorman
2012-06-18 22:05 ` [PATCH -mm 2/7] mm: get unmapped area from VMA tree Rik van Riel
2012-06-21  9:01   ` Johannes Weiner
2012-06-21 13:17     ` Rik van Riel
2012-06-21 16:50     ` Rik van Riel
2012-06-21 16:16   ` Mel Gorman
2012-06-21 17:27     ` Rik van Riel
2012-06-21 21:06   ` Peter Zijlstra
2012-06-18 22:05 ` [PATCH -mm 3/7] Allow each architecture to specify the address range that can be used for this allocation Rik van Riel
2012-06-18 22:05 ` [PATCH -mm 4/7] mm: make page colouring code generic Rik van Riel
2012-06-19 23:27   ` Andrew Morton
2012-06-21 17:52     ` Rik van Riel
2012-06-21 19:22       ` Borislav Petkov
2012-06-21 11:20   ` Peter Zijlstra
2012-06-21 14:30     ` Rik van Riel
2012-06-21 17:40       ` Andrew Morton
2012-06-21 17:45         ` Rik van Riel
2012-06-21 12:37   ` Borislav Petkov
2012-06-21 13:24     ` Rik van Riel
2012-06-18 22:05 ` Rik van Riel [this message]
2012-06-18 22:05 ` [PATCH -mm 6/7] remove MIPS arch_get_unmapped_area code Rik van Riel
2012-06-18 22:05 ` [PATCH -mm 7/7] remove ARM arch_get_unmapped_area functions Rik van Riel
2012-06-19 23:20 ` [PATCH -mm 0/7] mm: scalable and unified arch_get_unmapped_area Andrew Morton
2012-06-21 10:18 ` Johannes Weiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1340057126-31143-6-git-send-email-riel@redhat.com \
    --to=riel@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=andi@firstfloor.org \
    --cc=hannes@cmpxchg.org \
    --cc=kosaki.motohiro@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mel@csn.ul.ie \
    --cc=minchan@gmail.com \
    --cc=peterz@infradead.org \
    --cc=riel@surriel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).