From: Lai Jiangshan <laijs@cn.fujitsu.com>
To: Mel Gorman <mel@csn.ul.ie>, linux-kernel@vger.kernel.org
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>,
Andrew Morton <akpm@linux-foundation.org>,
Mel Gorman <mgorman@suse.de>,
David Rientjes <rientjes@google.com>,
Rik van Riel <riel@redhat.com>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
linux-mm@kvack.org
Subject: [RFC PATCH 06/23 V2] mempolicy: use N_MEMORY instead N_HIGH_MEMORY
Date: Thu, 2 Aug 2012 14:01:11 +0800 [thread overview]
Message-ID: <1343887288-8866-7-git-send-email-laijs@cn.fujitsu.com> (raw)
In-Reply-To: <1343887288-8866-1-git-send-email-laijs@cn.fujitsu.com>
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.
The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
---
mm/mempolicy.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 1d771e4..ad0381d 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -212,9 +212,9 @@ static int mpol_set_nodemask(struct mempolicy *pol,
/* if mode is MPOL_DEFAULT, pol is NULL. This is right. */
if (pol == NULL)
return 0;
- /* Check N_HIGH_MEMORY */
+ /* Check N_MEMORY */
nodes_and(nsc->mask1,
- cpuset_current_mems_allowed, node_states[N_HIGH_MEMORY]);
+ cpuset_current_mems_allowed, node_states[N_MEMORY]);
VM_BUG_ON(!nodes);
if (pol->mode == MPOL_PREFERRED && nodes_empty(*nodes))
@@ -1363,7 +1363,7 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
goto out_put;
}
- if (!nodes_subset(*new, node_states[N_HIGH_MEMORY])) {
+ if (!nodes_subset(*new, node_states[N_MEMORY])) {
err = -EINVAL;
goto out_put;
}
@@ -2314,7 +2314,7 @@ void __init numa_policy_init(void)
* fall back to the largest node if they're all smaller.
*/
nodes_clear(interleave_nodes);
- for_each_node_state(nid, N_HIGH_MEMORY) {
+ for_each_node_state(nid, N_MEMORY) {
unsigned long total_pages = node_present_pages(nid);
/* Preserve the largest node */
@@ -2395,7 +2395,7 @@ int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context)
*nodelist++ = '\0';
if (nodelist_parse(nodelist, nodes))
goto out;
- if (!nodes_subset(nodes, node_states[N_HIGH_MEMORY]))
+ if (!nodes_subset(nodes, node_states[N_MEMORY]))
goto out;
} else
nodes_clear(nodes);
@@ -2429,7 +2429,7 @@ int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context)
* Default to online nodes with memory if no nodelist
*/
if (!nodelist)
- nodes = node_states[N_HIGH_MEMORY];
+ nodes = node_states[N_MEMORY];
break;
case MPOL_LOCAL:
/*
--
1.7.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-08-02 6:00 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1343887288-8866-1-git-send-email-laijs@cn.fujitsu.com>
2012-08-02 6:01 ` [RFC PATCH 04/23 V2] oom: use N_MEMORY instead N_HIGH_MEMORY Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 05/23 V2] mm,migrate: " Lai Jiangshan
2012-08-02 16:09 ` Christoph Lameter
2012-08-02 6:01 ` Lai Jiangshan [this message]
2012-08-02 6:01 ` [RFC PATCH 07/23 V2] memcontrol: " Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 08/23 V2] hugetlb: " Lai Jiangshan
2012-08-04 14:02 ` Hillf Danton
2012-08-02 6:01 ` [RFC PATCH 09/23 V2] vmstat: " Lai Jiangshan
2012-08-02 16:09 ` Christoph Lameter
2012-08-02 6:01 ` [RFC PATCH 12/23 V2] vmscan: " Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 13/23 V2] page_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 14/23 V2] slub, hotplug: ignore unrelated node's hot-adding and hot-removing Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 15/23 V2] memory_hotplug: fix missing nodemask management Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 16/23 V2] numa: add CONFIG_MOVABLE_NODE for movable-dedicated node Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 17/23 V2] page_alloc.c: don't subtract unrelated memmap from zone's present pages Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 18/23 V2] page_alloc: add kernelcore_max_addr Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 21/23 V2] memblock: limit memory address from memblock Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 22/23 V2] memblock: compare current_limit with end variable at memblock_find_in_range_node() Lai Jiangshan
2012-08-02 6:01 ` [RFC PATCH 23/23 V2] mm, memory-hotplug: add online_movable Lai Jiangshan
[not found] ` <1344244999-5081-1-git-send-email-laijs@cn.fujitsu.com>
2012-08-06 9:22 ` [RFC V3 PATCH 01/25] page_alloc.c: don't subtract unrelated memmap from zone's present pages Lai Jiangshan
2012-08-06 9:22 ` [RFC V3 PATCH 02/25] memory_hotplug: fix missing nodemask management Lai Jiangshan
2012-08-06 9:22 ` [RFC V3 PATCH 03/25] slub, hotplug: ignore unrelated node's hot-adding and hot-removing Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 08/25] memcontrol: use N_MEMORY instead N_HIGH_MEMORY Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 09/25] oom: " Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 10/25] mm,migrate: " Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 11/25] mempolicy: " Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 12/25] hugetlb: " Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 13/25] vmstat: " Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 16/25] vmscan: " Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 17/25] page_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 18/25] hotplug: update nodemasks management Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 19/25] numa: add CONFIG_MOVABLE_NODE for movable-dedicated node Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 20/25] page_alloc: add kernelcore_max_addr Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 23/25] memblock: limit memory address from memblock Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 24/25] memblock: compare current_limit with end variable at memblock_find_in_range_node() Lai Jiangshan
2012-08-06 9:23 ` [RFC V3 PATCH 25/25] mm, memory-hotplug: add online_movable and online_kernel Lai Jiangshan
2012-08-02 2:52 [RFC PATCH 00/23 V2] memory, numa: introduce MOVABLE-dedicated node and online_movable for hotplug Lai Jiangshan
[not found] ` <1343875991-7533-1-git-send-email-laijs-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
2012-08-02 2:52 ` [RFC PATCH 06/23 V2] mempolicy: use N_MEMORY instead N_HIGH_MEMORY Lai Jiangshan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343887288-8866-7-git-send-email-laijs@cn.fujitsu.com \
--to=laijs@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mel@csn.ul.ie \
--cc=mgorman@suse.de \
--cc=riel@redhat.com \
--cc=rientjes@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).