linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Tony Prisk <linux@prisktech.co.nz>
To: Mel Gorman <mgorman@suse.de>
Cc: linux-mm@kvack.org,
	Arm Kernel Mailing List <linux-arm-kernel@lists.infradead.org>,
	Arnd Bergmann <arnd@arndb.de>
Subject: Re: dma_alloc_coherent fails in framebuffer
Date: Tue, 16 Oct 2012 07:28:24 +1300	[thread overview]
Message-ID: <1350325704.31162.16.camel@gitbox> (raw)
In-Reply-To: <20121015094547.GC29125@suse.de>

On Mon, 2012-10-15 at 10:45 +0100, Mel Gorman wrote:
> On Mon, Oct 15, 2012 at 09:34:55AM +1300, Tony Prisk wrote:
> > On Sun, 2012-10-14 at 18:28 +1300, Tony Prisk wrote:
> > > Up until 07 Oct, drivers/video/wm8505-fb.c was working fine, but on the
> > > 11 Oct when I did another pull from linus all of a sudden
> > > dma_alloc_coherent is failing to allocate the framebuffer any longer.
> > > 
> > > I did a quick look back and found this:
> > > 
> > > ARM: add coherent dma ops
> > > 
> > > arch_is_coherent is problematic as it is a global symbol. This
> > > doesn't work for multi-platform kernels or platforms which can support
> > > per device coherent DMA.
> > > 
> > > This adds arm_coherent_dma_ops to be used for devices which connected
> > > coherently (i.e. to the ACP port on Cortex-A9 or A15). The arm_dma_ops
> > > are modified at boot when arch_is_coherent is true.
> > > 
> > > Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> > > Cc: Russell King <linux@arm.linux.org.uk>
> > > Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> > > 
> > > 
> > > This is the only patch lately that I could find (not that I would claim
> > > to be any good at finding things) that is related to the problem. Could
> > > it have caused the allocations to fail?
> > > 
> > > Regards
> > > Tony P
> > 
> > Have done a bit more digging and found the cause - not Rob's patch so
> > apologies.
> > 
> > The cause of the regression is this patch:
> > 
> > From f40d1e42bb988d2a26e8e111ea4c4c7bac819b7e Mon Sep 17 00:00:00 2001
> > From: Mel Gorman <mgorman@suse.de>
> > Date: Mon, 8 Oct 2012 16:32:36 -0700
> > Subject: [PATCH 2/3] mm: compaction: acquire the zone->lock as late as
> >  possible
> > 
> > Up until then, the framebuffer allocation with dma_alloc_coherent(...)
> > was fine. From this patch onwards, allocations fail.
> > 
> 
> Was this found through bisection or some other means?
> 
> There was a bug in that series that broke CMA but it was commit bb13ffeb
> (mm: compaction: cache if a pageblock was scanned and no pages were
> isolated) and it was fixed by 62726059 (mm: compaction: fix bit ranges
> in {get,clear,set}_pageblock_skip()). So it should have been fixed by
> 3.7-rc1 and probably was included by the time you pulled in October 11th
> but bisection would be a pain. There were problems with that series during
> development but tests were completing for other people.
> 
> Just in case, is this still broken in 3.7-rc1?

Still broken. Although the printk's might have cleared it up a bit.
> 
> > I don't know how this patch would effect CMA allocations, but it seems
> > to be causing the issue (or at least, it's caused an error in
> > arch-vt8500 to become visible).
> > 
> > Perhaps someone who understand -mm could explain the best way to
> > troubleshoot the cause of this problem?
> > 
> 
> If you are comfortable with ftrace, it can be used to narrow down where
> the exact failure is occurring but if you're not comfortable with that
> then the easiest is a bunch of printks starting in alloc_contig_range()
> to see at what point and why it returns failure.
> 
> It's not obvious at the moment why that patch would cause an allocation
> problem. It's the type of patch that if it was wrong it would fail every
> time for everyone, not just for a single driver.
> 

I added some printk's to see what was happening.

from arch/arm/mm/dma-mapping.c: arm_dma_alloc(..) it calls out to:
dma_alloc_from_coherent().

This returns 0, because:
mem = dev->dma_mem
if (!mem) return 0;

and then arm_dma_alloc() falls back on __dma_alloc(..)


I suspect the reason this fault is a bit 'weird' is because its
effectively not using alloc_from_coherent at all, but falling back on
__dma_alloc all the time, and sometimes it fails.

Why it caused a problem on that particular commit I don't know - but it
was reproducible by adding/removing it.


Regards
Tony P

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2012-10-15 18:28 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1350192523.10946.4.camel@gitbox>
2012-10-14 20:34 ` dma_alloc_coherent fails in framebuffer Tony Prisk
2012-10-14 22:26   ` Tony Prisk
2012-10-15  6:42     ` Tomasz Figa
2012-10-15  8:03       ` Tony Prisk
2012-10-15 13:35         ` Marek Szyprowski
2012-10-15  9:45   ` Mel Gorman
2012-10-15 18:28     ` Tony Prisk [this message]
2012-10-16  2:17       ` Bob Liu
2012-10-16  5:02         ` Tony Prisk
2012-10-16  5:54         ` Tony Prisk
2012-10-16  6:50           ` Tony Prisk
2012-10-16  7:58             ` Mel Gorman
2012-10-16  8:13               ` Tony Prisk
2012-10-16 14:41         ` James Bottomley
2012-10-17  2:26           ` Bob Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350325704.31162.16.camel@gitbox \
    --to=linux@prisktech.co.nz \
    --cc=arnd@arndb.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).