linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Tony Prisk <linux@prisktech.co.nz>
To: Mel Gorman <mgorman@suse.de>
Cc: linux-mm@kvack.org,
	Arm Kernel Mailing List <linux-arm-kernel@lists.infradead.org>,
	Arnd Bergmann <arnd@arndb.de>
Subject: Re: dma_alloc_coherent fails in framebuffer
Date: Tue, 16 Oct 2012 21:13:22 +1300	[thread overview]
Message-ID: <1350375202.31523.1.camel@gitbox> (raw)
In-Reply-To: <20121016075835.GF29125@suse.de>

On Tue, 2012-10-16 at 08:58 +0100, Mel Gorman wrote:
> On Tue, Oct 16, 2012 at 07:50:07PM +1300, Tony Prisk wrote:
> > > > > Why it caused a problem on that particular commit I don't know - but it
> > > > > was reproducible by adding/removing it.
> > > > >
> > > 
> > > I finally found the link to this patch which caused the problem - and
> > > may still be the cause of my problems :)
> > > 
> 
> Blast, thanks. This was already identified as being a problem and "fixed"
> in https://lkml.org/lkml/2012/10/5/164 but I missed that the fix did not
> get picked up before RC1 after all the patches got collapsed together. I'm
> very sorry about that, I should have spotted that it didn't make it through.
> 
> > Any suggestions on how to fix this?
> > 
> 
> Can you test this to be sure and if it's fine I'll push it to Andrew.
> 
> ---8<---
> mm: compaction: Correct the strict_isolated check for CMA
> 
> Thierry reported that the "iron out" patch for isolate_freepages_block()
> had problems due to the strict check being too strict with "mm: compaction:
> Iron out isolate_freepages_block() and isolate_freepages_range() -fix1".
> It's possible that more pages than necessary are isolated but the check
> still fails and I missed that this fix was not picked up before RC1. This
> has also been identified in RC1 by Tony Prisk and should be addressed by
> the following patch.
> 
> Signed-off-by: Mel Gorman <mgorman@suse.de>
> --- 
>  compaction.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/mm/compaction.c b/mm/compaction.c
> index 2c4ce17..9eef558 100644
> --- a/mm/compaction.c
> +++ b/mm/compaction.c
> @@ -346,7 +346,7 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
>  	 * pages requested were isolated. If there were any failures, 0 is
>  	 * returned and CMA will fail.
>  	 */
> -	if (strict && nr_strict_required != total_isolated)
> +	if (strict && nr_strict_required > total_isolated)
>  		total_isolated = 0;
>  
>  	if (locked)

I don't need to test that again.. thats exactly what I did to fix it
myself :)

Tested-by: Tony Prisk <linux@prisktech.co.nz>

.. if needed.

Nice to know I'm not completely bonkers.

Thanks for your help
Tony P

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2012-10-16  8:13 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1350192523.10946.4.camel@gitbox>
2012-10-14 20:34 ` dma_alloc_coherent fails in framebuffer Tony Prisk
2012-10-14 22:26   ` Tony Prisk
2012-10-15  6:42     ` Tomasz Figa
2012-10-15  8:03       ` Tony Prisk
2012-10-15 13:35         ` Marek Szyprowski
2012-10-15  9:45   ` Mel Gorman
2012-10-15 18:28     ` Tony Prisk
2012-10-16  2:17       ` Bob Liu
2012-10-16  5:02         ` Tony Prisk
2012-10-16  5:54         ` Tony Prisk
2012-10-16  6:50           ` Tony Prisk
2012-10-16  7:58             ` Mel Gorman
2012-10-16  8:13               ` Tony Prisk [this message]
2012-10-16 14:41         ` James Bottomley
2012-10-17  2:26           ` Bob Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350375202.31523.1.camel@gitbox \
    --to=linux@prisktech.co.nz \
    --cc=arnd@arndb.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).