From: Jiang Liu <liuj97@gmail.com>
To: "Rafael J . Wysocki" <rjw@sisk.pl>,
Yinghai Lu <yinghai@kernel.org>, Tony Luck <tony.luck@intel.com>,
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>,
Wen Congyang <wency@cn.fujitsu.com>,
Tang Chen <tangchen@cn.fujitsu.com>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Jiang Liu <jiang.liu@huawei.com>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Huang Ying <ying.huang@intel.com>,
Bob Moore <robert.moore@intel.com>, Len Brown <lenb@kernel.org>,
"Srivatsa S . Bhat" <srivatsa.bhat@linux.vnet.ibm.com>,
Yijing Wang <wangyijing@huawei.com>,
Hanjun Guo <guohanjun@huawei.com>, Jiang Liu <liuj97@gmail.com>,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-pci@vger.kernel.org, linux-mm@kvack.org
Subject: [ACPIHP PATCH part2 00/13] introduce ACPI based system device hotplug driver
Date: Sun, 4 Nov 2012 20:50:02 +0800 [thread overview]
Message-ID: <1352033415-5606-1-git-send-email-jiang.liu@huawei.com> (raw)
This is the second part of the new ACPI based system device hotplug
framework, which implements the ACPI based system device hotplug
driver (acpihp_drv). For an introduction of the new framework,
please refer to:
https://lkml.org/lkml/2012/11/3/143
https://github.com/downloads/jiangliu/linux/ACPI%20Based%20System%20Device%20Dynamic%20Reconfiguration.pdf
And you may pull from:
https://github.com/jiangliu/linux.git acpihp_drv
The hotplug driver provides following features:
1) Configure/unconfigure affected system devices in optimal order
2) Provide sysfs interfaces for user to trigger hotplug operations
3) Provide interface to cancel ongoing hotplug opertions
4) Resolve dependencies among hotplug slots
5) Better error handling and recovery
This patch set implements the core of the new ACPI hotplug framework,
a state machine for ACPI hotplug slots. The state machine is:
(plug in) (power on) (connect) (configure)
[ABSENT] <-> [PRESENT] <-> [POWERED] <-> [CONNECTED] <-> [CONFIGURED]
(plug out) (power off) (disconnect) (unconfigure)
[...]: state
(...): action
(connect): create ACPI devices and bind ACPI device drivers
(disconnect): unbind ACPI device drivers and destroy ACPI devices
(configure): allocate resources and put system devices into working
(unconfigure): stop system devices from working and free resources
It depends on the ACPI hotplug slot enumeration driver to control each
slot in platform specific ways, and also depends on ACPI device drivers
for processor, memory, PCI host bridge and container to configure/
unconfigure each system device.
For example, Intel Emerald Ridge/Quantum S4R platform has
1) 4 hotpluggable physical processors
2) 8 hotpluggable memory boards (each processor has two memory boards)
3) 1 hotpluggable IOH and 1 non-hotpluggable legacy IOH
Following command sequence shows how to hot-remove and then hot-add
a physical processor with two memory boards attached to it.
Intel-server:~ # cd /sys/devices/LNXSYSTM\:00/acpihp/CPU03/
Intel-server:/sys/devices/LNXSYSTM:00/acpihp/CPU03 # lscpu
......
CPU socket(s): 4
NUMA node(s): 4
......
NUMA node0 CPU(s): 0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68,72,76
NUMA node1 CPU(s): 2,6,10,14,18,22,26,30,34,38,42,46,50,54,58,62,66,70,74,78
NUMA node2 CPU(s): 1,5,9,13,17,21,25,29,33,37,41,45,49,53,57,61,65,69,73,77
NUMA node3 CPU(s): 3,7,11,15,19,23,27,31,35,39,43,47,51,55,59,63,67,71,75,79
Intel-server:/sys/devices/LNXSYSTM:00/acpihp/CPU03 # free
total used free shared buffers cached
Mem: 57507896 506988 57000908 0 7520 151604
-/+ buffers/cache: 347864 57160032
Swap: 2096124 0 2096124
Intel-server:/sys/devices/LNXSYSTM:00/acpihp/CPU03 # echo disconnect > control
Intel-server:/sys/devices/LNXSYSTM:00/acpihp/CPU03 # lscpu
......
CPU socket(s): 3
NUMA node(s): 3
......
NUMA node0 CPU(s): 0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68,72,76
NUMA node1 CPU(s): 2,6,10,14,18,22,26,30,34,38,42,46,50,54,58,62,66,70,74,78
NUMA node2 CPU(s): 1,5,9,13,17,21,25,29,33,37,41,45,49,53,57,61,65,69,73,77
Intel-server:/sys/devices/LNXSYSTM:00/acpihp/CPU03 # free
total used free shared buffers cached
Mem: 40730680 419024 40311656 0 7648 144020
-/+ buffers/cache: 267356 40463324
Swap: 2096124 0 2096124
Intel-server:/sys/devices/LNXSYSTM:00/acpihp/CPU03 # echo configure > control
Intel-server:/sys/devices/LNXSYSTM:00/acpihp/CPU03 # lscpu
......
CPU socket(s): 4
NUMA node(s): 4
Vendor ID: GenuineIntel
......
NUMA node0 CPU(s): 0,4,8,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68,72,76
NUMA node1 CPU(s): 2,6,10,14,18,22,26,30,34,38,42,46,50,54,58,62,66,70,74,78
NUMA node2 CPU(s): 1,5,9,13,17,21,25,29,33,37,41,45,49,53,57,61,65,69,73,77
NUMA node3 CPU(s): 3,7,11,15,19,23,27,31,35,39,43,47,51,55,59,63,67,71,75,79
And following patch sets will enhance ACPI container, processor, memory
and PCI host bridge drivers to support the new hotplug framework.
Jiang Liu (13):
ACPIHP: introduce interfaces to scan and walk ACPI devices attached
to a slot
ACPIHP: use klist to manage ACPI devices attached to a slot
ACPIHP: add callbacks into acpi_device_ops to support new hotplug
framework
ACPIHP: provide interfaces to manage driver data associated with
hotplug slots
ACPIHP: implement utility interfaces to support system device hotplug
ACPIHP: implement ACPI system device hotplug driver skeleton
ACPIHP: analyse dependencies among ACPI hotplug slots
ACPIHP: provide interface to cancel inprogress hotplug operations
ACPIHP: configure/unconfigure system devices attached to a hotplug
slot
ACPIHP: implement the core state machine to manage hotplug slots
ACPIHP: block ACPI device driver from unloading when doing hotplug
ACPIHP: implement sysfs interfaces for system device hotplug
ACPIHP: handle ACPI device hotplug events
drivers/acpi/Kconfig | 15 +
drivers/acpi/hotplug/Makefile | 11 +-
drivers/acpi/hotplug/acpihp.h | 1 +
drivers/acpi/hotplug/acpihp_drv.h | 100 ++++++
drivers/acpi/hotplug/cancel.c | 174 +++++++++
drivers/acpi/hotplug/configure.c | 355 +++++++++++++++++++
drivers/acpi/hotplug/core.c | 281 +++++++++++++++
drivers/acpi/hotplug/dependency.c | 245 +++++++++++++
drivers/acpi/hotplug/device.c | 208 +++++++++++
drivers/acpi/hotplug/drv_main.c | 343 ++++++++++++++++++
drivers/acpi/hotplug/event.c | 163 +++++++++
drivers/acpi/hotplug/state_machine.c | 639 ++++++++++++++++++++++++++++++++++
drivers/acpi/hotplug/sysfs.c | 181 ++++++++++
drivers/acpi/internal.h | 3 +
drivers/acpi/scan.c | 12 +-
include/acpi/acpi_bus.h | 5 +
include/acpi/acpi_hotplug.h | 121 +++++++
17 files changed, 2854 insertions(+), 3 deletions(-)
create mode 100644 drivers/acpi/hotplug/acpihp_drv.h
create mode 100644 drivers/acpi/hotplug/cancel.c
create mode 100644 drivers/acpi/hotplug/configure.c
create mode 100644 drivers/acpi/hotplug/dependency.c
create mode 100644 drivers/acpi/hotplug/device.c
create mode 100644 drivers/acpi/hotplug/drv_main.c
create mode 100644 drivers/acpi/hotplug/event.c
create mode 100644 drivers/acpi/hotplug/state_machine.c
create mode 100644 drivers/acpi/hotplug/sysfs.c
--
1.7.9.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2012-11-04 12:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-04 12:50 Jiang Liu [this message]
2012-11-04 12:50 ` [ACPIHP PATCH part2 01/13] ACPIHP: introduce interfaces to scan and walk ACPI devices attached to a slot Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 02/13] ACPIHP: use klist to manage " Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 03/13] ACPIHP: add callbacks into acpi_device_ops to support new hotplug framework Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 04/13] ACPIHP: provide interfaces to manage driver data associated with hotplug slots Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 05/13] ACPIHP: implement utility interfaces to support system device hotplug Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 06/13] ACPIHP: implement ACPI system device hotplug driver skeleton Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 07/13] ACPIHP: analyse dependencies among ACPI hotplug slots Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 08/13] ACPIHP: provide interface to cancel inprogress hotplug operations Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 09/13] ACPIHP: configure/unconfigure system devices attached to a hotplug slot Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 10/13] ACPIHP: implement the core state machine to manage hotplug slots Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 11/13] ACPIHP: block ACPI device driver from unloading when doing hotplug Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 12/13] ACPIHP: implement sysfs interfaces for system device hotplug Jiang Liu
2012-11-04 12:50 ` [ACPIHP PATCH part2 13/13] ACPIHP: handle ACPI device hotplug events Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352033415-5606-1-git-send-email-jiang.liu@huawei.com \
--to=liuj97@gmail.com \
--cc=bhelgaas@google.com \
--cc=guohanjun@huawei.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=robert.moore@intel.com \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
--cc=tangchen@cn.fujitsu.com \
--cc=tony.luck@intel.com \
--cc=wangyijing@huawei.com \
--cc=wency@cn.fujitsu.com \
--cc=ying.huang@intel.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).