linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Ingo Molnar <mingo@kernel.org>
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
	Paul Turner <pjt@google.com>,
	Lee Schermerhorn <Lee.Schermerhorn@hp.com>,
	Christoph Lameter <cl@linux.com>, Rik van Riel <riel@redhat.com>,
	Mel Gorman <mgorman@suse.de>,
	Andrew Morton <akpm@linux-foundation.org>,
	Andrea Arcangeli <aarcange@redhat.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Hugh Dickins <hughd@google.com>
Subject: [PATCH 07/27] mm: Optimize the TLB flush of sys_mprotect() and change_protection() users
Date: Mon, 19 Nov 2012 03:14:24 +0100	[thread overview]
Message-ID: <1353291284-2998-8-git-send-email-mingo@kernel.org> (raw)
In-Reply-To: <1353291284-2998-1-git-send-email-mingo@kernel.org>

Reuse the NUMA code's 'modified page protections' count that
change_protection() computes and skip the TLB flush if there's
no changes to a range that sys_mprotect() modifies.

Given that mprotect() already optimizes the same-flags case
I expected this optimization to dominantly trigger on
CONFIG_NUMA_BALANCING=y kernels - but even with that feature
disabled it triggers rather often.

There's two reasons for that:

1)

While sys_mprotect() already optimizes the same-flag case:

        if (newflags == oldflags) {
                *pprev = vma;
                return 0;
        }

and this test works in many cases, but it is too sharp in some
others, where it differentiates between protection values that the
underlying PTE format makes no distinction about, such as
PROT_EXEC == PROT_READ on x86.

2)

Even where the pte format over vma flag changes necessiates a
modification of the pagetables, there might be no pagetables
yet to modify: they might not be instantiated yet.

During a regular desktop bootup this optimization hits a couple
of hundred times. During a Java test I measured thousands of
hits.

So this optimization improves sys_mprotect() in general, not just
CONFIG_NUMA_BALANCING=y kernels.

[ We could further increase the efficiency of this optimization if
  change_pte_range() and change_huge_pmd() was a bit smarter about
  recognizing exact-same-value protection masks - when the hardware
  can do that safely. This would probably further speed up mprotect(). ]

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 mm/mprotect.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/mprotect.c b/mm/mprotect.c
index 1e265be..7c3628a 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -153,7 +153,9 @@ static unsigned long change_protection_range(struct vm_area_struct *vma,
 				 dirty_accountable);
 	} while (pgd++, addr = next, addr != end);
 
-	flush_tlb_range(vma, start, end);
+	/* Only flush the TLB if we actually modified any entries: */
+	if (pages)
+		flush_tlb_range(vma, start, end);
 
 	return pages;
 }
-- 
1.7.11.7

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2012-11-19  2:15 UTC|newest]

Thread overview: 101+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-19  2:14 [PATCH 00/27] Latest numa/core release, v16 Ingo Molnar
2012-11-19  2:14 ` [PATCH 01/27] mm/generic: Only flush the local TLB in ptep_set_access_flags() Ingo Molnar
2012-11-19  2:14 ` [PATCH 02/27] x86/mm: Only do a local tlb flush " Ingo Molnar
2012-11-19  2:14 ` [PATCH 03/27] x86/mm: Introduce pte_accessible() Ingo Molnar
2012-11-19  2:14 ` [PATCH 04/27] mm: Only flush the TLB when clearing an accessible pte Ingo Molnar
2012-11-19  2:14 ` [PATCH 05/27] x86/mm: Completely drop the TLB flush from ptep_set_access_flags() Ingo Molnar
2012-11-19  2:14 ` [PATCH 06/27] mm: Count the number of pages affected in change_protection() Ingo Molnar
2012-11-19  2:14 ` Ingo Molnar [this message]
2012-11-19  2:14 ` [PATCH 08/27] sched, numa, mm: Add last_cpu to page flags Ingo Molnar
2012-11-19  2:14 ` [PATCH 09/27] sched, mm, numa: Create generic NUMA fault infrastructure, with architectures overrides Ingo Molnar
2012-11-19  2:14 ` [PATCH 10/27] sched: Make find_busiest_queue() a method Ingo Molnar
2012-11-19  2:14 ` [PATCH 11/27] sched, numa, mm: Describe the NUMA scheduling problem formally Ingo Molnar
2012-11-19  2:14 ` [PATCH 12/27] numa, mm: Support NUMA hinting page faults from gup/gup_fast Ingo Molnar
2012-11-19  2:14 ` [PATCH 13/27] mm/migrate: Introduce migrate_misplaced_page() Ingo Molnar
2012-11-19  2:14 ` [PATCH 14/27] sched, numa, mm, arch: Add variable locality exception Ingo Molnar
2012-11-19  2:14 ` [PATCH 15/27] sched, numa, mm: Add credits for NUMA placement Ingo Molnar
2012-11-19  2:14 ` [PATCH 16/27] sched, mm, x86: Add the ARCH_SUPPORTS_NUMA_BALANCING flag Ingo Molnar
2012-11-19  2:14 ` [PATCH 17/27] sched, numa, mm: Add the scanning page fault machinery Ingo Molnar
2012-11-19  2:14 ` [PATCH 18/27] sched: Add adaptive NUMA affinity support Ingo Molnar
2012-11-19  2:14 ` [PATCH 19/27] sched: Implement constant, per task Working Set Sampling (WSS) rate Ingo Molnar
2012-11-19  2:14 ` [PATCH 20/27] sched, numa, mm: Count WS scanning against present PTEs, not virtual memory ranges Ingo Molnar
2012-11-19  2:14 ` [PATCH 21/27] sched: Implement slow start for working set sampling Ingo Molnar
2012-11-19  2:14 ` [PATCH 22/27] sched, numa, mm: Interleave shared tasks Ingo Molnar
2012-11-19  2:14 ` [PATCH 23/27] sched: Implement NUMA scanning backoff Ingo Molnar
2012-11-19  2:14 ` [PATCH 24/27] sched: Improve convergence Ingo Molnar
2012-11-19  2:14 ` [PATCH 25/27] sched: Introduce staged average NUMA faults Ingo Molnar
2012-11-19  2:14 ` [PATCH 26/27] sched: Track groups of shared tasks Ingo Molnar
2012-11-19  2:14 ` [PATCH 27/27] sched: Use the best-buddy 'ideal cpu' in balancing decisions Ingo Molnar
2012-11-19 16:29 ` [PATCH 00/27] Latest numa/core release, v16 Mel Gorman
2012-11-19 19:13   ` Ingo Molnar
2012-11-19 21:18     ` Mel Gorman
2012-11-19 22:36       ` Ingo Molnar
2012-11-19 23:00         ` Mel Gorman
2012-11-20  0:41           ` Rik van Riel
2012-11-21 10:58             ` Mel Gorman
2012-11-20  1:02         ` Linus Torvalds
2012-11-20  7:17           ` Ingo Molnar
2012-11-20  7:37             ` David Rientjes
2012-11-20  7:48               ` Ingo Molnar
2012-11-20  8:01               ` Ingo Molnar
2012-11-20  8:11                 ` David Rientjes
2012-11-21 11:14               ` Mel Gorman
2012-11-20 10:20             ` Mel Gorman
2012-11-20 10:47               ` Mel Gorman
2012-11-20 15:29             ` [PATCH] mm, numa: Turn 4K pte NUMA faults into effective hugepage ones Ingo Molnar
2012-11-20 16:09               ` [PATCH, v2] " Ingo Molnar
2012-11-20 16:31                 ` Rik van Riel
2012-11-20 16:52                   ` Ingo Molnar
2012-11-21 12:08                     ` Mel Gorman
2012-11-21  8:12                   ` Ingo Molnar
2012-11-21  2:41                 ` David Rientjes
2012-11-21  9:34                   ` Ingo Molnar
2012-11-21 11:40                 ` Mel Gorman
2012-11-23  1:26                 ` Alex Shi
2012-11-20 17:56               ` numa/core regressions fixed - more testers wanted Ingo Molnar
2012-11-21  1:54                 ` Andrew Theurer
2012-11-21  3:22                   ` Rik van Riel
2012-11-21  4:10                     ` Hugh Dickins
2012-11-21 17:59                       ` Andrew Theurer
2012-11-21 11:52                   ` Mel Gorman
2012-11-21 22:15                     ` Andrew Theurer
2012-11-21  3:33                 ` David Rientjes
2012-11-21  9:38                   ` Ingo Molnar
2012-11-21 11:06                   ` Ingo Molnar
2012-11-21  8:39                 ` Alex Shi
2012-11-22  1:21                   ` Ingo Molnar
2012-11-23 13:31                     ` Ingo Molnar
2012-11-23 15:23                       ` Alex Shi
2012-11-26  2:11                       ` Alex Shi
2012-11-28 14:21                         ` Alex Shi
2012-11-20 10:40         ` [PATCH 00/27] Latest numa/core release, v16 Ingo Molnar
2012-11-20 11:40           ` Mel Gorman
2012-11-21 10:38     ` Mel Gorman
2012-11-21 19:37       ` Andrea Arcangeli
2012-11-21 19:56         ` Mel Gorman
2012-11-19 20:07   ` Ingo Molnar
2012-11-19 21:37     ` Mel Gorman
2012-11-20  0:50   ` David Rientjes
2012-11-20  1:05     ` David Rientjes
2012-11-20  6:00       ` Ingo Molnar
2012-11-20  6:20         ` David Rientjes
2012-11-20  7:44           ` Ingo Molnar
2012-11-20  7:48             ` Paul Turner
2012-11-20  8:20             ` David Rientjes
2012-11-20  9:06               ` Ingo Molnar
2012-11-20  9:41                 ` [patch] x86/vsyscall: Add Kconfig option to use native vsyscalls, switch to it Ingo Molnar
2012-11-20 23:01                   ` Andy Lutomirski
2012-11-21  0:43                   ` David Rientjes
2012-11-20 12:02                 ` [PATCH] x86/mm: Don't flush the TLB on #WP pmd fixups Ingo Molnar
2012-11-20 12:31                   ` Ingo Molnar
2012-11-21 11:47                     ` Mel Gorman
2012-11-21  1:22                   ` David Rientjes
2012-11-21 17:02                 ` [PATCH 00/27] Latest numa/core release, v16 Linus Torvalds
2012-11-21 17:10                   ` Ingo Molnar
2012-11-21 17:20                     ` Ingo Molnar
2012-11-22  4:31                       ` David Rientjes
2012-11-21 17:40                     ` Ingo Molnar
2012-11-21 22:04                     ` Linus Torvalds
2012-11-21 22:46                       ` Ingo Molnar
2012-11-21 17:45                   ` Rik van Riel
2012-11-21 18:04                   ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1353291284-2998-8-git-send-email-mingo@kernel.org \
    --to=mingo@kernel.org \
    --cc=Lee.Schermerhorn@hp.com \
    --cc=a.p.zijlstra@chello.nl \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=cl@linux.com \
    --cc=hannes@cmpxchg.org \
    --cc=hughd@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    --cc=pjt@google.com \
    --cc=riel@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).