linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Nitin Gupta <ngupta@vflare.org>,
	Seth Jennings <sjenning@linux.vnet.ibm.com>,
	Jerome Marchand <jmarchan@redhat.com>,
	Dan Magenheimer <dan.magenheimer@oracle.com>,
	Konrad Rzeszutek Wilk <konrad@darnok.org>,
	Pekka Enberg <penberg@cs.helsinki.fi>,
	Minchan Kim <minchan@kernel.org>
Subject: [PATCH 2/2] zram: allocate metadata when disksize is set up
Date: Fri, 23 Nov 2012 11:42:47 +0900	[thread overview]
Message-ID: <1353638567-3981-2-git-send-email-minchan@kernel.org> (raw)
In-Reply-To: <1353638567-3981-1-git-send-email-minchan@kernel.org>

Lockdep complains about recursive deadlock of zram->init_lock.
Because zram_init_device could be called in reclaim context and
it requires a page with GFP_KERNEL.

We can fix it via replacing GFP_KERNEL with GFP_NOIO.
But more big problem is vzalloc in zram_init_device which calls GFP_KERNEL.
We can change it with __vmalloc which can receive gfp_t.
But still we have a problem. Although __vmalloc can handle gfp_t, it calls
allocation of GFP_KERNEL. That's why I sent the patch.
https://lkml.org/lkml/2012/4/23/77

Yes. Fundamental problem is utter crap API vmalloc.
If we can fix it, everyone would be happy. But life isn't simple
like seeing my thread of the patch.

So next option is to give up lazy initialization and initialize it at the
very disksize setting time. But it makes unnecessary metadata waste until
zram is really used. But let's think about it.

1) User of zram normally do mkfs.xxx or mkswap before using
   the zram block device(ex, normally, do it at booting time)
   It ends up allocating such metadata of zram before real usage so
   benefit of lazy initialzation would be mitigated.

2) Some user want to use zram when memory pressure is high.(ie, load zram
   dynamically, NOT booting time). It does make sense because people don't
   want to waste memory until memory pressure is high(ie, where zram is really
   helpful time). In this case, lazy initialzation could be failed easily
   because we will use GFP_NOIO instead of GFP_KERNEL for avoiding deadlock.
   So the benefit of lazy initialzation would be mitigated, too.

3) Metadata overhead is not critical and Nitin has a plan to diet it.
   4K : 12 byte(64bit machine) -> 64G : 192M so 0.3% isn't big overhead
   If insane user use such big zram device up to 20, it could consume 6% of ram
   but efficieny of zram will cover the waste.

So this patch gives up lazy initialization and instead we initialize metadata
at disksize setting time.

Signed-off-by: Minchan Kim <minchan@kernel.org>
---
 drivers/staging/zram/zram_drv.c   |   21 ++++-----------------
 drivers/staging/zram/zram_sysfs.c |    1 +
 2 files changed, 5 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 9ef1eca..f364fb5 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -441,16 +441,13 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct zram *zram = queue->queuedata;
 
-	if (unlikely(!zram->init_done) && zram_init_device(zram))
-		goto error;
-
 	down_read(&zram->init_lock);
 	if (unlikely(!zram->init_done))
-		goto error_unlock;
+		goto error;
 
 	if (!valid_io_request(zram, bio)) {
 		zram_stat64_inc(zram, &zram->stats.invalid_io);
-		goto error_unlock;
+		goto error;
 	}
 
 	__zram_make_request(zram, bio, bio_data_dir(bio));
@@ -458,9 +455,8 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 
 	return;
 
-error_unlock:
-	up_read(&zram->init_lock);
 error:
+	up_read(&zram->init_lock);
 	bio_io_error(bio);
 }
 
@@ -509,19 +505,12 @@ void zram_reset_device(struct zram *zram)
 	up_write(&zram->init_lock);
 }
 
+/* zram->init_lock should be hold */
 int zram_init_device(struct zram *zram)
 {
 	int ret;
 	size_t num_pages;
 
-	down_write(&zram->init_lock);
-	if (zram->init_done) {
-		up_write(&zram->init_lock);
-		return 0;
-	}
-
-	BUG_ON(!zram->disksize);
-
 	if (zram->disksize > 2 * (totalram_pages << PAGE_SHIFT)) {
 		pr_info(
 		"There is little point creating a zram of greater than "
@@ -570,7 +559,6 @@ int zram_init_device(struct zram *zram)
 	}
 
 	zram->init_done = 1;
-	up_write(&zram->init_lock);
 
 	pr_debug("Initialization done!\n");
 	return 0;
@@ -580,7 +568,6 @@ fail_no_table:
 	zram->disksize = 0;
 fail:
 	__zram_reset_device(zram);
-	up_write(&zram->init_lock);
 	pr_err("Initialization failed: err=%d\n", ret);
 	return ret;
 }
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c
index 4143af9..369db12 100644
--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -71,6 +71,7 @@ static ssize_t disksize_store(struct device *dev,
 
 	zram->disksize = PAGE_ALIGN(disksize);
 	set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT);
+	zram_init_device(zram);
 	up_write(&zram->init_lock);
 
 	return len;
-- 
1.7.9.5

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2012-11-23  2:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-23  2:42 [PATCH 1/2] zram: force disksize setting before using zram Minchan Kim
2012-11-23  2:42 ` Minchan Kim [this message]
2012-11-27  5:13   ` [PATCH 2/2] zram: allocate metadata when disksize is set up Nitin Gupta
2012-11-27 15:45     ` Jerome Marchand
2012-11-28  4:26       ` Minchan Kim
2012-11-28  4:22     ` Minchan Kim
2012-11-27  5:04 ` [PATCH 1/2] zram: force disksize setting before using zram Nitin Gupta
2012-11-28  4:20   ` Minchan Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1353638567-3981-2-git-send-email-minchan@kernel.org \
    --to=minchan@kernel.org \
    --cc=dan.magenheimer@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jmarchan@redhat.com \
    --cc=konrad@darnok.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ngupta@vflare.org \
    --cc=penberg@cs.helsinki.fi \
    --cc=sjenning@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).