linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Nitin Gupta <ngupta@vflare.org>,
	Seth Jennings <sjenning@linux.vnet.ibm.com>,
	Konrad Rzeszutek Wilk <konrad@darnok.org>,
	Dan Magenheimer <dan.magenheimer@oracle.com>,
	Pekka Enberg <penberg@cs.helsinki.fi>,
	jmarchan@redhat.com, Minchan Kim <minchan@kernel.org>
Subject: [PATCH v5 3/4] zram: give up lazy initialization of zram metadata
Date: Wed, 23 Jan 2013 08:52:24 +0900	[thread overview]
Message-ID: <1358898745-4873-3-git-send-email-minchan@kernel.org> (raw)
In-Reply-To: <1358898745-4873-1-git-send-email-minchan@kernel.org>

1) User of zram normally do mkfs.xxx or mkswap before using
   the zram block device(ex, normally, do it at booting time)
   It ends up allocating such metadata of zram before real usage so
   benefit of lazy initialzation would be mitigated.

2) Some user want to use zram when memory pressure is high.(ie, load zram
   dynamically, NOT booting time). It does make sense because people don't
   want to waste memory until memory pressure is high(ie, where zram is really
   helpful time). In this case, lazy initialzation could be failed easily
   because we will use GFP_NOIO instead of GFP_KERNEL for avoiding deadlock.
   So the benefit of lazy initialzation would be mitigated, too.

3) Metadata overhead is not critical and Nitin has a plan to diet it.
   4K : 12 byte(64bit machine) -> 64G : 192M so 0.3% isn't big overhead
   If insane user use such big zram device up to 20, it could consume 6% of ram
   but efficieny of zram will cover the waste.

So this patch gives up lazy initialization and instead we initialize metadata
at disksize setting time.

Cc: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
---
 drivers/staging/zram/zram_drv.c   |   20 ++++----------------
 drivers/staging/zram/zram_sysfs.c |    1 +
 2 files changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index f8ae1bf..4264121 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -440,16 +440,13 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct zram *zram = queue->queuedata;
 
-	if (unlikely(!zram->init_done) && zram_init_device(zram))
-		goto error;
-
 	down_read(&zram->init_lock);
 	if (unlikely(!zram->init_done))
-		goto error_unlock;
+		goto error;
 
 	if (!valid_io_request(zram, bio)) {
 		zram_stat64_inc(zram, &zram->stats.invalid_io);
-		goto error_unlock;
+		goto error;
 	}
 
 	__zram_make_request(zram, bio, bio_data_dir(bio));
@@ -457,9 +454,8 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 
 	return;
 
-error_unlock:
-	up_read(&zram->init_lock);
 error:
+	up_read(&zram->init_lock);
 	bio_io_error(bio);
 }
 
@@ -508,18 +504,12 @@ void zram_reset_device(struct zram *zram)
 	up_write(&zram->init_lock);
 }
 
+/* zram->init_lock should be held */
 int zram_init_device(struct zram *zram)
 {
 	int ret;
 	size_t num_pages;
 
-	down_write(&zram->init_lock);
-
-	if (zram->init_done) {
-		up_write(&zram->init_lock);
-		return 0;
-	}
-
 	if (zram->disksize > 2 * (totalram_pages << PAGE_SHIFT)) {
 		pr_info(
 		"There is little point creating a zram of greater than "
@@ -568,7 +558,6 @@ int zram_init_device(struct zram *zram)
 	}
 
 	zram->init_done = 1;
-	up_write(&zram->init_lock);
 
 	pr_debug("Initialization done!\n");
 	return 0;
@@ -578,7 +567,6 @@ fail_no_table:
 	zram->disksize = 0;
 fail:
 	__zram_reset_device(zram);
-	up_write(&zram->init_lock);
 	pr_err("Initialization failed: err=%d\n", ret);
 	return ret;
 }
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c
index 4143af9..369db12 100644
--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -71,6 +71,7 @@ static ssize_t disksize_store(struct device *dev,
 
 	zram->disksize = PAGE_ALIGN(disksize);
 	set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT);
+	zram_init_device(zram);
 	up_write(&zram->init_lock);
 
 	return len;
-- 
1.7.9.5

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2013-01-22 23:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-22 23:52 [PATCH v5 1/4] zram: Fix deadlock bug in partial write Minchan Kim
2013-01-22 23:52 ` [PATCH v5 2/4] zram: force disksize setting before using zram Minchan Kim
2013-01-22 23:52 ` Minchan Kim [this message]
2013-01-22 23:52 ` [PATCH v5 4/4] zram: get rid of lockdep warning Minchan Kim
2013-01-22 23:58 ` [PATCH v5 1/4] zram: Fix deadlock bug in partial write Nitin Gupta
2013-01-23  0:06   ` Minchan Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358898745-4873-3-git-send-email-minchan@kernel.org \
    --to=minchan@kernel.org \
    --cc=dan.magenheimer@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jmarchan@redhat.com \
    --cc=konrad@darnok.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ngupta@vflare.org \
    --cc=penberg@cs.helsinki.fi \
    --cc=sjenning@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).